kein Brennen möglich

[nWoStar]

Hallo zusammen,

ich hab jetzt schon nen teac 52x brenner sowie den lite on 48x getestet, ebenso verschiedene rohlinge...das gerät wird vom system erkannt...nur wenn ich ne musik cd, oder ne mp3 zusammenstellung brennen möchte kommt er über 5 % nicht hinaus...also schreiben tut er nix ;(

an was liegt das verdammt noch mal *heul*

[Gast]

hast du ein nforce 2 mainboard?

[nWoStar]

also wenn ich mit nero etwas schreiben möchte,
kommt immer ne fehlermeldung
-Burn Proof aktiviert
Cachen von Dateien
Cachen von Dateien fertig
Teac CD 552E
Scsi Befehl abgebrochen
Teac CD 552E\H1 T0
Teac CD 552 E
ungültiger Brennzustand

egal ob ich den Teac brenner drin habe oder den Lite on.
Beide Geräte werden in der Systemsteuerung als Scsi Geräte erkannt *wundertz*

meine Festplatte hab ich am S-ata 1 hängen auf dem Mainboard. Wird auch als Scsi raid 0 erkannt.

hier unten die log:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17.07.2002 09:20:56
ahead WinASPI: File 'G:\Brennsoftware\nero 6.0.0.28\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17.06.2003 14:25:04
Nero Version: 6.0.0.28
Recorder: <TEAC CD-W552E> Version: 1.09 - HA 1 TA 0 - 6.0.0.28
Adapter driver: <nvidesm> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <TOSHIBA DVD-ROM SD-M1712>Version: 1004 - HA 1 TA 1 - 6.0.0.28
Adapter driver: <nvidesm> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : HDS722512VLSA80 V33O si3112r Port 0 ID 0 DMA: Off
CdRomPeripheral : TEAC CD-W552E 1.09 nvidesm Port 1 ID 0 DMA: Off
CdRomPeripheral : TOSHIBA DVD-ROM SD-M17121004 nvidesm Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
TEAC CD-W552E D: CDRom0
TOSHIBA DVD-ROM SD-M1712 E: CDRom1
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 665MB (681684kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

15.12.2003
CD-ROM (MP3)
09:02:29 #1 Text 0 File Isodoc.cpp, Line 6024
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

09:02:29 #2 Phase 72 File dlgbrnst.cpp, Line 1800
BURN-Proof activated

09:02:29 #3 Text 0 File Reader.cpp, Line 118
Reader running

09:02:29 #4 Text 0 File Writer.cpp, Line 124
Writer TEAC CD-W552E running

09:02:29 #5 ISO9660GEN -11 File geniso.cpp, Line 3882
First writeable address = 0 (0x00000000)

09:02:29 #6 Text 0 File Burncd.cpp, Line 3128
Turn on Track-at-Once, using CD-R/RW media

09:02:29 #7 Text 0 File DlgWaitCD.cpp, Line 237
Last possible write address on media: 334949 (74:27.74)
Last address to be written: 284809 (63:19.34)

09:02:29 #8 Text 0 File DlgWaitCD.cpp, Line 242
Write in overburning mode: FALSE

09:02:29 #9 Text 0 File DlgWaitCD.cpp, Line 2043
Recorder: TEAC CD-W552E;
CDRW code: 00 97 26 00; OSJ entry from: FORNET INTERNATIONAL PTE LTD.
ATIP Data:
Special Info [hex] 1: E1 00 C6, 2: 61 1A 00 (LI 97:26.00), 3: 4A 1C 00 (LO 74:28.00)
Additional Info [hex] 1: 02 3A B0, 2: 5C C6 26, 3: 00 80 80 (invalid)

09:02:29 #10 Text 0 File DlgWaitCD.cpp, Line 403
>>> Protocol of DlgWaitCD activities: <<<
=========================================

09:02:29 #11 Text 0 File ThreadedTransferInterface.cpp, Line 775
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 284810 (284810) = #284810/63:17.35
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 284808 blocks [TEAC CD-W552E ]
--------------------------------------------------------------

09:02:29 #12 Text 0 File ThreadedTransferInterface.cpp, Line 944
Prepare recorder [TEAC CD-W552E ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 583598080, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
284810 | lead-out | 1 | 0x00 | 0x41

09:02:29 #13 Text 0 File ThreadedTransferInterface.cpp, Line 971
Removed 2 run-out blocks from end of track 1.

09:02:29 #14 Phase 24 File dlgbrnst.cpp, Line 1800
Caching of files started

09:02:29 #15 Text 0 File Burncd.cpp, Line 4095
Cache writing successful.

09:02:29 #16 Phase 25 File dlgbrnst.cpp, Line 1800
Caching of files completed

09:02:29 #17 Phase 36 File dlgbrnst.cpp, Line 1800
Burn process started at 4x (600 KB/s)

09:02:29 #18 Text 0 File ThreadedTransferInterface.cpp, Line 2167
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

09:02:29 #19 Text 0 File Mmc.cpp, Line 19359
Set BUFE: BURN-Proof -> ON

09:02:35 #20 SCSI -500 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x042A0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02

09:02:35 #21 CDR -500 File Writer.cpp, Line 301
SCSI command aborted
TEAC CD-W552E\H1 T0

09:02:35 #22 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

09:02:35 #23 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

09:02:47 #24 CDR -201 File WriterStatus.cpp, Line 193
Invalid write state
TEAC CD-W552E\H1 T0

09:02:47 #25 TRANSFER -18 File WriterStatus.cpp, Line 193
Could not perform EndTrack

09:02:47 #26 Text 0 File Mmc.cpp, Line 14220
<TEAC CD-W552E > start Close Session

09:04:08 #27 Text 0 File dlgbrnst.cpp, Line 1658
Set remaining time: 0:00,000 (0ms) -> OK

09:04:08 #28 Phase 38 File dlgbrnst.cpp, Line 1800
Burn process failed at 4x (600 KB/s)


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.10 (116), size=23561 bytes, created 18.09.2001 15:54:00
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17.07.2002 08:53:02
File 'Drivers\nvidesm.sys': Ver=5.10.2600.0307 built by: WinDDK, size=20224 bytes, created 13.11.2002 08:10:00 (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

[UNPLUgg3D]

hallo, kann es sein dass du bei deinem Nforce2 Board die NForce Treiber incl. der IDE Treiber installiert hast?
Die machen bei vielen Probleme. Ich kann dir nur Raten den NForce Treiber ohne IDE Treiber zu installieren, läuft in der Regel genauso schnell und verursacht weniger Probleme. Dazu musst du einfach nur die Datei (NForce-Treiber) komplett entpacken und in dem Verzeichnis den IDE Ordner entfernen. Dann wie gewohnt über setup installieren... Viel Glück