Nertzauslastung Linux - XP

[nn23]

Hi!

Ich habe ein Problem.

ein Linux PC --- switch ---- XP PC

auf dem Linux PC läuft ein ftp-server.

wenn ich jetzt ne grosse datei (ca. 500 MB) über den Ftp kopiere, sieht das so aus:

http://www.8ung.at/nn23/lan.JPG

Links das "normale" ist, wenn ich vom XP-PC auf den Linux-PC kopiere.

Rechts das "komische" ist, wenn ich von Linux auf den XP-PC kopiere.

woran liegt das?

erstmal die schwankungen, und die Auslastung. von XP-<Linux sind das 90%, von Linux-->XP grade mal um die 60!

Plz Help me!

[(del676)]

cat /var/log/syslog
cat /var/log/messages
cat /var/log/samba/smbd.log
dmesg
lspci
lsmod

schreib dann mal die outputs hier rein

[nn23]

smbd.log hab ich nich, und syslog 3 verschiedene

/etc/sysconfig/syslog
/etc/init.d/syslog
/etc/logrotate.d/syslog



--------------------DMESG -----------------------

Linux version 2.4.21-166-athlon (root@i386.suse.de) (gcc version 3.3.1 (SuSE Linux)) #1 Thu Dec 18 18:24:05 UTC 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000ffec000 (usable)
BIOS-e820: 000000000ffec000 - 000000000ffef000 (ACPI data)
BIOS-e820: 000000000ffef000 - 000000000ffff000 (reserved)
BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
757MB vmalloc/ioremap area available.
0MB HIGHMEM available.
255MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 65516
zone(0): 4096 pages.
zone(1): 61420 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 ASUS ) @ 0x000f6a80
ACPI: RSDT (v001 ASUS A7V133-C 12336.12337) @ 0x0ffec000
ACPI: FADT (v001 ASUS A7V133-C 12336.12337) @ 0x0ffec080
ACPI: BOOT (v001 ASUS A7V133-C 12336.12337) @ 0x0ffec040
ACPI: DSDT (v001 ASUS A7V133-C 00000.04096) @ 0x00000000
ACPI: Skipping APIC setup
Building zonelist for node : 0
Kernel command line: root=/dev/hda3 desktop hdc=ide-scsi hdclun=0 splash=silent vga=normal
ide_setup: hdc=ide-scsi
ide_setup: hdclun=0
bootsplash: silent mode.
Initializing CPU#0
Detected 1410.340 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 2768.89 BogoMIPS
Memory: 255204k/262064k available (1727k kernel code, 6472k reserved, 605k data, 176k init, 0k highmem)
Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: Common caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: AMD Athlon(TM) XP 1600+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030619
PCI: PCI BIOS revision 2.10 entry at 0xf1180, last bus=1
PCI: Using configuration type 1
Looking for DSDT in initrd ... not found!
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
00:00:0c[A] -> IRQ 11 Mode 1 Trigger 1
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
00:00:0c[B] -> IRQ 9 Mode 1 Trigger 1
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
00:00:0c[C] -> IRQ 5 Mode 1 Trigger 1
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
00:00:0c[D] -> IRQ 10 Mode 1 Trigger 1
PIC: IRQ (9) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (10) already programmed
PIC: IRQ (11) already programmed
PIC: IRQ (9) already programmed
PIC: IRQ (5) already programmed
PIC: IRQ (10) already programmed
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Applying VIA southbridge workaround.
PCI: Disabling Via external APIC routing
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16)
apm: overridden by ACPI.
Starting kswapd
bigpage subsystem: allocated 0 bigpages (=0MB).
kinoded started
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 16379
aio_setup: sizeof(struct page) = 48
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
Real Time Clock Driver v1.10e
floppy0: no floppy controllers found
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 16 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:04.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:04.1
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST340810A, ATA DISK drive
hdb: Maxtor 6Y120L0, ATA DISK drive
blk: queue c03e66c0, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c03e681c, I/O limit 4095Mb (mask 0xffffffff)
hdc: IDE-CD R/RW 16x10A, ATAPI CD/DVD-ROM drive
hdd: MATSHITADVD-ROM SR-8588, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63, UDMA(100)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3
hdb: hdb1
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
cryptoapi: loaded
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 279k freed
VFS: Mounted root (ext2 filesystem).
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (device ide0(3,3)) ...
for (ide0(3,3))
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 176k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
reiserfs: enabling write barrier flush mode
lvm-mp: allocating 42 lowmem entries at c1fbc000
LVM version 1.0.5+(mp-v6c)(22/07/2002) module loaded
reiserfs: enabling write barrier flush mode
Adding Swap: 1052248k swap-space (priority 42)
reiserfs: enabling write barrier flush mode
reiserfs: enabling write barrier flush mode
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (device ide0(3,1)) ...
for (ide0(3,1))
Using r5 hash to sort names
NTFS driver 2.1.4a [Flags: R/O MODULE].
NTFS volume version 3.1.
hdd: attached ide-cdrom driver.
hdd: ATAPI 48X DVD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.12
SCSI subsystem driver Revision: 1.00
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: IDE-CD Model: R/RW 16x10A Rev: 01A4
Type: CD-ROM ANSI SCSI revision: 02
dmfe: Davicom DM9xxx/ALi M5261 net driver, version 1.36.4 (2002-01-17)
eth0: Davicom DM9102 at pci00:09.0, 00:08:a1:36:2d:36, irq 10.
ohci1394: $Rev: 1045 $ Ben Collins <bcollins@debian.org>
ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[c9000000-c90007ff] Max Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c00210460a9]
raw1394: /dev/raw1394 device initialized
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 19:01:30 Dec 18 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
hub.c: new USB device 00:04.2-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x50d/0x81) is not claimed by any active driver.
mice: PS/2 mouse device common for all mice
hub.c: new USB device 00:04.2-2, assigned address 3
usb.c: USB device 3 (vend/prod 0x46d/0xc012) is not claimed by any active driver.
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
usb-uhci.c: ENXIO 80000280, flags 0, urb c1d739c0, burb c1d738c0
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c1d739c0, burb c1d738c0
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c1d739c0, burb c1d738c0
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c1d73ac0, burb c1d739c0
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c1d738c0, burb c1d739c0
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c1d738c0, burb c1d739c0
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c1d739c0, burb c1d738c0
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 193 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c1d739c0, burb c1d738c0
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c1d739c0, burb c1d738c0
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c1d739c0, burb c1d738c0
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c1d739c0, burb c1d738c0
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c1d739c0, burb c1d738c0
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c1d739c0, burb c1d738c0
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c1d739c0, burb c1d738c0
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c1d738c0, burb c1d739c0
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 193 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c1d738c0, burb c1d739c0
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c1d738c0, burb c1d739c0
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
usb-uhci.c: ENXIO 80000280, flags 0, urb c1d739c0, burb c1d738c0
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 9 ret -6
usb.c: registered new driver hiddev
usb.c: registered new driver hid
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb1:3.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1 C2, 16 throttling states)
IPsec Security Association Database (SADB): initialized.
IPsec Security Policy Database (SPD): initialized.
IPsec PF_KEY V2: initialized
IPv6 v0.8 (usagi-cvs/IPsec6 based StS) for NET4.0
IPv6 over IPv4 tunneling driver
parport_pc: Via 686A parallel port disabled in BIOS
lp: driver loaded but no devices found
usb.c: registered new driver serial
usbserial.c: USB Serial support registered for Generic
usbserial.c: USB Serial Driver core v1.4
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
0: nvidia: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-5336 Wed Jan 14 18:29:26 PST 2004
eth0: no IPv6 routers present
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Detected Via Twister-K/KT133x/KM133 chipset
agpgart: AGP aperture is 256M @ 0xd0000000
agpgart: Device is in legacy mode, falling back to 2.x
agpgart: Putting AGP V2 device at 00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 01:00.0 into 4x mode
Linux video capture interface: v1.00



---------------------LSPCI-----------------------------------------------



00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
00:04.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:04.2 USB Controller: VIA Technologies, Inc. USB (rev 16)
00:04.3 USB Controller: VIA Technologies, Inc. USB (rev 16)
00:04.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
00:09.0 Ethernet controller: Davicom Semiconductor, Inc. Ethernet 100/10 MBit (rev 31)
00:0d.0 Multimedia audio controller: Creative Labs SB Audigy (rev 03)
00:0d.1 Input device controller: Creative Labs SB Audigy MIDI/Game port (rev 03)
00:0d.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port
01:00.0 VGA compatible controller: nVidia Corporation NV25 [GeForce4 Ti 4200] (rev a3)



--------------------------LSMOD--------------------------------------------



Module Size Used by Tainted: P
snd-pcm-oss 49728 0 (autoclean)
snd-mixer-oss 15576 1 (autoclean) [snd-pcm-oss]
videodev 6272 0 (autoclean)
agpgart 45752 3 (autoclean)
nvidia 1964800 6 (autoclean)
isa-pnp 32712 0 (unused)
usbserial 19836 0 (autoclean) (unused)
parport_pc 28648 0 (autoclean) (unused)
lp 6304 0 (autoclean)
parport 25608 0 (autoclean) [parport_pc lp]
snd-seq-oss 30048 0 (autoclean)
ipv6 227392 -1 (autoclean)
snd-seq-midi 5088 0 (unused)
key 70456 0 (autoclean) [ipv6]
snd-emu10k1-synth 6396 0
snd-emux-synth 31484 0 [snd-emu10k1-synth]
snd-seq-midi-emul 5376 0 [snd-emux-synth]
snd-seq-virmidi 4040 0 [snd-emux-synth]
snd-seq-midi-event 3840 0 [snd-seq-oss snd-seq-midi snd-seq-virmidi]
snd-seq 41424 3 [snd-seq-oss snd-seq-midi snd-emux-synth snd-seq-midi-emul snd-seq-virmidi snd-seq-midi-event]
snd-emu10k1 78788 6 [snd-emu10k1-synth]
snd-pcm 74148 1 [snd-pcm-oss snd-emu10k1]
snd-page-alloc 6676 0 [snd-emu10k1 snd-pcm]
snd-timer 17024 0 [snd-seq snd-pcm]
snd-rawmidi 15968 0 [snd-seq-midi snd-seq-virmidi snd-emu10k1]
snd-util-mem 1696 0 [snd-emux-synth snd-emu10k1]
snd-seq-device 4528 0 [snd-seq-oss snd-seq-midi snd-emu10k1-synth snd-emux-synth snd-seq snd-emu10k1 snd-rawmidi]
snd-ac97-codec 45400 0 [snd-emu10k1]
thermal 6180 0 (unused)
processor 8312 0 [thermal]
snd-hwdep 5440 0 [snd-emu10k1]
snd 40388 4 [snd-pcm-oss snd-mixer-oss snd-seq-oss snd-seq-midi snd-emu10k1-synth snd-emux-synth snd-seq-midi-emul snd-seq-virmidi snd-seq-midi-event snd-seq snd-emu10k1 snd-pcm snd-timer snd-rawmidi snd-util-mem snd-seq-device snd-ac97-codec snd-hwdep]
fan 1472 0 (unused)
button 2380 0 (unused)
soundcore 3940 0 [snd]
battery 5600 0 (unused)
ac 1696 0 (unused)
hid 21444 0 (unused)
st 29648 0 (autoclean) (unused)
sr_mod 14616 0 (autoclean)
sg 35232 0 (autoclean)
keybdev 2156 0 (unused)
mousedev 4340 1
joydev 5440 0 (unused)
evdev 3840 0 (unused)
input 3488 0 [hid keybdev mousedev joydev evdev]
usb-uhci 23824 0 (unused)
usbcore 64364 1 [usbserial hid usb-uhci]
raw1394 18288 0 (unused)
ohci1394 25808 0 (unused)
ieee1394 188260 0 [raw1394 ohci1394]
af_packet 13192 1 (autoclean)
dmfe 14721 1
ide-scsi 11056 0
scsi_mod 100788 4 [st sr_mod sg ide-scsi]
ide-cd 32416 0
cdrom 29216 0 [sr_mod ide-cd]
nls_iso8859-1 2844 1 (autoclean)
ntfs 80300 1 (autoclean)
lvm-mod 65668 0 (autoclean)
reiserfs 217236 2



MESSAGES



Feb 12 20:47:01 nn23 su: pam_unix2: session finished for user root, service su
Feb 12 20:47:52 nn23 proftpd[8234]: nn23.workgroup (fuckup[192.168.0.3]) - FTP session opened.
Feb 12 20:47:56 nn23 proftpd[8234]: nn23.workgroup (fuckup[192.168.0.3]) - USER nn23: Login successful.
Feb 12 20:53:26 nn23 proftpd[8234]: nn23.workgroup (fuckup[192.168.0.3]) - FTP session closed.

[nn23]

hab einfach mal alle 3 eingefügt

/etc/sysconfig/syslog
--------------------------

## Path: System/Logging
## Description: System logging
## Type: list(0,1,2,3,4,5,6,7)
## Default: 1
## Config: ""
## ServiceRestart: syslog
#
# Default loglevel for klogd
#
KERNEL_LOGLEVEL=1

## Type: string
## Default: ""
## Config: ""
## ServiceRestart: syslog
#
# if not empty: parameters for syslogd
# for example SYSLOGD_PARAMS="-r -s my.dom.ain"
#
SYSLOGD_PARAMS=""

## Type: string
## Default: -2
## Config: ""
## ServiceRestart: syslog
#
# if not empty: parameters for klogd
# for example KLOGD_PARAMS="-2" for clean oops lines
#
KLOGD_PARAMS="-2"

## Type: list(syslogd,syslog-ng)
## Default: syslogd
## Config: syslog-ng
## Command: /sbin/rcsyslog restart
## PreSaveCommand: /sbin/rcsyslog status && /sbin/rcsyslog stop
#
# The name of the syslog daemon used as
# syslog service: "syslogd", "syslog-ng"
#
SYSLOG_DAEMON="syslogd"


/etc/init.d/syslog
-----------------------------------------------------

#! /bin/sh
#
# Copyright (c) 1996-2001 SuSE GmbH Nuernberg, Germany.
# Copyright (c) 2002-2003 SuSE Linux AG, Nuernberg, Germany.
#
# Author: Florian La Roche <florian@suse.de>, 1996
# Werner Fink <werner@suse.de>, 1998-2001
#
# /etc/init.d/syslog
#
### BEGIN INIT INFO
# Provides: syslog
# Required-Start: network
# Required-Stop: network
# Default-Start: 2 3 5
# Default-Stop:
# Description: Start the system logging daemons
### END INIT INFO

. /etc/sysconfig/syslog

BINDIR=/sbin

case "$SYSLOG_DAEMON" in
syslog-ng)
syslog=syslog-ng
config=/etc/syslog-ng/syslog-ng.conf
params="$SYSLOG_NG_PARAMS"
;;
*)
syslog=syslogd
config=/etc/syslog.conf
params="$SYSLOGD_PARAMS"
# add additional sockets to SYSLOGD_PARAMS
for variable in ${!SYSLOGD_ADDITIONAL_SOCKET*}; do
eval value=\$$variable
test -n "${value}" && test -d ${value%/*} && \
params="$params -a $value"
done
;;
esac
syslog_pid="/var/run/${syslog}.pid"

# check config and programs
test -s ${config} || exit 6
test -x ${BINDIR}/$syslog || exit 5
test -x ${BINDIR}/klogd || exit 5

. /etc/rc.status
rc_reset
case "$1" in
start)
test -s /var/run/klogd.pid && killproc ${BINDIR}/klogd
test -s ${syslog_pid} && {
killproc -p ${syslog_pid} ${BINDIR}/${syslog}
echo -n "Re-"
}
echo -n "Starting syslog services"
test -z "$KERNEL_LOGLEVEL" && KERNEL_LOGLEVEL=1

startproc -p ${syslog_pid} ${BINDIR}/${syslog} $params
rc_status
if test $? -eq 0 ; then
startproc ${BINDIR}/klogd -c $KERNEL_LOGLEVEL $KLOGD_PARAMS
rc_status
fi
rc_status -v
;;
stop)
echo -n "Shutting down syslog services"
killproc -TERM ${BINDIR}/klogd ; rc_status
killproc -p ${syslog_pid} -TERM ${BINDIR}/${syslog} ; rc_status -v
;;
try-restart)
$0 stop && $0 start
rc_status
;;
restart)
$0 stop
$0 start
rc_status
;;
reload|force-reload)
echo -n "Reload syslog service"
killproc -TSTP ${BINDIR}/klogd ; rc_status
killproc -p ${syslog_pid} -HUP ${BINDIR}/${syslog} ; rc_status
killproc -CONT ${BINDIR}/klogd ; rc_status
killproc -USR2 ${BINDIR}/klogd ; rc_status -v
;;
status)
echo -n "Checking for service syslog:"
checkproc ${BINDIR}/klogd ; rc_status
checkproc -p ${syslog_pid} ${BINDIR}/${syslog} ; rc_status -v
;;
probe)
test ${config} -nt ${syslog_pid} && echo reload
;;
*)
echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|probe}"
exit 1
;;
esac
rc_exit


etc/logrotate.d/syslog
-----------------------------------------------------------------------

/var/log/warn /var/log/messages /var/log/allmessages /var/log/localmessages /var/log/firewall {
compress
dateext
maxage 365
rotate 99
missingok
notifempty
size +4096k
create 640 root root
sharedscripts
postrotate
/etc/init.d/syslog reload
endscript
}

/var/log/mail /var/log/mail.info /var/log/mail.warn /var/log/mail.err {
compress
dateext
maxage 365
rotate 99
missingok
notifempty
size +4096k
create 640 root root
sharedscripts
postrotate
/etc/init.d/syslog reload
endscript
}

[nn23]

hab jez mal kurz nen echten samba server - 2.2.8 installiert.

da siehts ähnlich aus, von xp -> Linux geht ca. 20 % schneller

aber:

insgesamt liegen die transferraten jetzt maximal bei 60-70%

von linux->windows sogar unter 50% !

[Birdman]

ich kenne das von LAN's her....wenn ich sauge dann geht dies Super ohne grosse Performanceeinbussen, auch bei 10+MB/s.
Saugen hingegen die andern von mir wird das System so grottenlahm dass man nimmer wirklich was machen kann.
Browser starten dauert dann locker 10 Sek und das bei 2.6Ghz und 1GB Ram.
NIC's habe ich übrigens schon mehrere probiert, unter anderem auch einen Intel pro100 ServerAdapter.
k.A. woher das genau kommt...

[nn23]

wie sieht das eigentlich mit chipsatztreibern aus??

habn asus a7v133c
mit ide-platten

sind die via-treiber schon dabei??

hab mal unter via.com geguckt, da sind keine treiber für SuSE 9.0

das letzte ist 8.1/8.2

hdparm macht sowas:

nn23:/ # hdparm -Tt /dev/hda

/dev/hda:
Timing buffer-cache reads: 520 MB in 2.00 seconds = 259.74 MB/sec
Timing buffered disk reads: 70 MB in 3.03 seconds = 23.08 MB/sec

lesegeschwindigkeit sollte ja ausreichen!

[Benedikt]

Original geschrieben von nn23
Hi!

Ich habe ein Problem.

ein Linux PC --- switch ---- XP PC

auf dem Linux PC läuft ein ftp-server.

wenn ich jetzt ne grosse datei (ca. 500 MB) über den Ftp kopiere, sieht das so aus:

http://www.8ung.at/nn23/lan.JPG

Links das "normale" ist, wenn ich vom XP-PC auf den Linux-PC kopiere.

Rechts das "komische" ist, wenn ich von Linux auf den XP-PC kopiere.

woran liegt das?

erstmal die schwankungen, und die Auslastung. von XP-<Linux sind das 90%, von Linux-->XP grade mal um die 60!

Plz Help me!

Das kann schlicht und einfach an deinem Ethernet-Kabel liegen, dass eben nicht alle Adern dieselbe Dämpfung/Übertragungsqualität aufweisen. Probier's mal mit einem Kabeltester (wenn du die Chance dazu hast).

MFG,
BW

Edit: Die höhere CPU-Last erklärt sich auch durch die höhere Geschwindigkeit (Qualität) von XP nach Linux.
Dürften die TX-Adern (Linux-Seitig) sein, die nicht so gut sind.

[nn23]

jo, das kenn ich auch noch von alten lans!

aber was mich stutzig macht, das in eine richtung der transfer zu fast 100 % steht, in die andere richtung aber nur knapp über 50%

dann dürfte ja eigentlich beides nicht allzu hoch sein!

der Unterschied von fast 50% ärgert mich dabei!

das muss doch auch mit fast 100% in die andere Richtung gehen!

[nn23]

Hier ist nochmal n top wenn ich am kopieren bin

top - 22:28:17 up 4:48, 1 user, load average: 0.51, 0.56, 0.54
Tasks: 75 total, 2 running, 72 sleeping, 0 stopped, 1 zombie
Cpu(s): 74.4% user, 25.6% system, 0.0% nice, 0.0% idle
Mem: 255660k total, 252396k used, 3264k free, 1724k buffers
Swap: 1052248k total, 52340k used, 999908k free, 148888k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
10451 nobody 15 0 3412 3064 2108 S 10.3 1.2 2:26.25 smbd


also der smb hat 10% cpu auslastung, also nich allzu viel!

vorher wars ftp, aber der dürfte dann ja auch nicht viel mehr haben!

kann ich irgendwie gucken was die platten im momo machen?

[Crushinator]

Mir scheint's als würden sich die "MTU" und/oder "Frame Window Size" auf der XP-Kiste nicht mit denen der Linux-Kiste vertragen.

Was sagt denn DRTCP (http://www.dslreports.com/drtcp) unter XP?

Meins sieht so aus: (Win98SE)

[nn23]

bin im momo auf der arbeit, werd ich nachher mal schauen!


werde mir mal ein Lan-Kabel von der Arbeit mitnehmen und es damit probieren!

und einmal DRTCP probieren

Danke für die Antworten!