Der X-Server 2D-Speed Test.

[Exxtreme]

OK Leute, da sich einige beschwert haben, daß der X-Server nur langsam ist beim Zeichnen, hier ein Test damit wir die Ergebnisse vergleichen können.

Einfach die Konsole öffnen (keine anderen Programme im Hintergrund laufen lassen!) und das eingeben:

x11perf -aa10text


Hier meine Ergebnise:


alex@Linux1 alex $ x11perf -aa10text
x11perf - X11 performance program, version 1.5
Gentoo Linux (The X.Org Foundation 6.7.0, revision r1-1.1.1) server version 60700000 on :0.0
from Linux1
Wed Jul 28 22:01:57 2004

Sync time adjustment is 0.0256 msecs.

3200000 reps @ 0.0016 msec (636000.0/sec): Char in 80-char aa line (Charter 10)
3200000 reps @ 0.0016 msec (636000.0/sec): Char in 80-char aa line (Charter 10)
3200000 reps @ 0.0016 msec (636000.0/sec): Char in 80-char aa line (Charter 10)
3200000 reps @ 0.0016 msec (636000.0/sec): Char in 80-char aa line (Charter 10)
3200000 reps @ 0.0016 msec (637000.0/sec): Char in 80-char aa line (Charter 10)
16000000 trep @ 0.0016 msec (636000.0/sec): Char in 80-char aa line (Charter 10)

[Ganon]

Sync time adjustment is 0.2545 msecs.

4000000 reps @ 0.0015 msec (668000.0/sec): Char in 80-char aa line (Charter 10)
4000000 reps @ 0.0015 msec (673000.0/sec): Char in 80-char aa line (Charter 10)
4000000 reps @ 0.0015 msec (678000.0/sec): Char in 80-char aa line (Charter 10)
4000000 reps @ 0.0015 msec (686000.0/sec): Char in 80-char aa line (Charter 10)
4000000 reps @ 0.0015 msec (686000.0/sec): Char in 80-char aa line (Charter 10)
20000000 trep @ 0.0015 msec (673000.0/sec): Char in 80-char aa line (Charter 10)

FreeBSD 5.2.1
XFree 4.3.0
PentiumII 333
128MB-RAM
ATi Rage 128 mit 32MB-RAM (XFree Treiber 2D/3D-Beschleunigung)
GNome lief im Hintergrund
16bit Farbtiefe

[Ganon]

Sync time adjustment is 0.0808 msecs.

3200000 reps @ 0.0019 msec (515000.0/sec): Char in 80-char aa line (Charter 10)
3200000 reps @ 0.0019 msec (516000.0/sec): Char in 80-char aa line (Charter 10)
3200000 reps @ 0.0019 msec (517000.0/sec): Char in 80-char aa line (Charter 10)
3200000 reps @ 0.0019 msec (516000.0/sec): Char in 80-char aa line (Charter 10)
3200000 reps @ 0.0019 msec (517000.0/sec): Char in 80-char aa line (Charter 10)
16000000 trep @ 0.0019 msec (516000.0/sec): Char in 80-char aa line (Charter 10)

Rechner aus der Signatur mit OS X 10.3.4. 32bit Farbtiefe

[Ganon]

Sync time adjustment is 0.0421 msecs.

320000 reps @ 0.0165 msec ( 60600.0/sec): Char in 80-char aa line (Charter 10)
320000 reps @ 0.0165 msec ( 60600.0/sec): Char in 80-char aa line (Charter 10)
320000 reps @ 0.0165 msec ( 60600.0/sec): Char in 80-char aa line (Charter 10)
320000 reps @ 0.0165 msec ( 60600.0/sec): Char in 80-char aa line (Charter 10)
320000 reps @ 0.0165 msec ( 60600.0/sec): Char in 80-char aa line (Charter 10)
1600000 trep @ 0.0165 msec ( 60600.0/sec): Char in 80-char aa line (Charter 10)

Rechner wieder aus der Signatur. Jedoch mit YellowDog Linux 3. Kernel 2.4.21 mit XFree86 4.3 mit 2D/3D-Treibern von XFree86. 24 bit Farbtiefe

[HellHorse]

x11perf - X11 performance program, version 1.5
Gentoo Linux (The X.Org Foundation 6.7.0, revision r2-1.2) server version 60700000 on :0.0
from brueckenkopf
Wed Jul 28 23:03:22 2004

Sync time adjustment is 0.0304 msecs.

8000000 reps @ 0.0007 msec (1500000.0/sec): Char in 80-char aa line (Charter 10)
8000000 reps @ 0.0007 msec (1500000.0/sec): Char in 80-char aa line (Charter 10)
8000000 reps @ 0.0007 msec (1500000.0/sec): Char in 80-char aa line (Charter 10)
8000000 reps @ 0.0007 msec (1500000.0/sec): Char in 80-char aa line (Charter 10)
8000000 reps @ 0.0007 msec (1500000.0/sec): Char in 80-char aa line (Charter 10)
40000000 trep @ 0.0007 msec (1500000.0/sec): Char in 80-char aa line (Charter 10)

Mit einer G200, die vom Laster gefallen ist.
Wie's aussieht beim Verschieben von Fenstern kann ich nicht sagen. Fluxbox zeichnet nur den Rahmen. :)

edit:
offen waren:
gkrellm, fbpager und aterm

[Korak]

x11perf - X11 performance program, version 1.5
Mandrake Linux (XFree86 4.3, patch level 30mdk) server version 40300001 on :0.0
Wed Jul 28 23:15:52 2004

Sync time adjustment is 0.0371 msecs.

4000000 reps @ 0.0015 msec (661000.0/sec): Char in 80-char aa line (Charter 10)
4000000 reps @ 0.0015 msec (668000.0/sec): Char in 80-char aa line (Charter 10)
4000000 reps @ 0.0015 msec (670000.0/sec): Char in 80-char aa line (Charter 10)
4000000 reps @ 0.0015 msec (669000.0/sec): Char in 80-char aa line (Charter 10)
4000000 reps @ 0.0015 msec (670000.0/sec): Char in 80-char aa line (Charter 10)
20000000 trep @ 0.0015 msec (667000.0/sec): Char in 80-char aa line (Charter 10)


XP 2400+, 9600XT.

[hart]

x11perf - X11 performance program, version 1.5
The XFree86 Project, Inc server version 40399902 on :0.0
from hr
Wed Jul 28 23:41:48 2004

Sync time adjustment is 0.0328 msecs.

240000 reps @ 0.0295 msec ( 33900.0/sec): Char in 80-char aa line (Charter 10 )
240000 reps @ 0.0295 msec ( 33900.0/sec): Char in 80-char aa line (Charter 10 )
240000 reps @ 0.0295 msec ( 33900.0/sec): Char in 80-char aa line (Charter 10 )
240000 reps @ 0.0295 msec ( 33900.0/sec): Char in 80-char aa line (Charter 10 )
240000 reps @ 0.0295 msec ( 33900.0/sec): Char in 80-char aa line (Charter 10 )
1200000 trep @ 0.0295 msec ( 33900.0/sec): Char in 80-char aa line (Charter 10 )

XP1700+@2200 Mhz, Radeon8500@9100 Pro(275/275 Mhz)

[Ganon]

Hmm. Sehr komischer Werte alles.

Kann mir mal bitte einer erklären was was bedeutet und was gut/schlecht ist?

Weil ich finde es komisch das mein Pentium II mit Rage128 ähnlich Werte anzeigt wie ein XP 2400 mit 9600XT.

[bluey]

Datem stehen unten.


x11perf - X11 performance program, version 1.5
Gentoo Linux (The X.Org Foundation 6.7.0, revision r2-1.2) server version 60700000 on :0.0
from Gentoo
Wed Jul 28 23:55:50 2004

Sync time adjustment is 0.0424 msecs.

16000000 reps @ 0.0004 msec (2780000.0/sec): Char in 80-char aa line (Charter 10)
16000000 reps @ 0.0004 msec (2790000.0/sec): Char in 80-char aa line (Charter 10)
16000000 reps @ 0.0004 msec (2560000.0/sec): Char in 80-char aa line (Charter 10)
16000000 reps @ 0.0004 msec (2780000.0/sec): Char in 80-char aa line (Charter 10)
16000000 reps @ 0.0004 msec (2670000.0/sec): Char in 80-char aa line (Charter 10)
80000000 trep @ 0.0004 msec (2710000.0/sec): Char in 80-char aa line (Charter 10)

Edit: Oups hab gerade was im Hintergrund Kompiliert. Hier die korrekten Werte.

x11perf - X11 performance program, version 1.5
Gentoo Linux (The X.Org Foundation 6.7.0, revision r2-1.2) server version 60700000 on :0.0
from Gentoo
Thu Jul 29 00:15:05 2004

Sync time adjustment is 0.0264 msecs.

16000000 reps @ 0.0003 msec (2980000.0/sec): Char in 80-char aa line (Charter 10)
16000000 reps @ 0.0003 msec (2980000.0/sec): Char in 80-char aa line (Charter 10)
16000000 reps @ 0.0003 msec (2980000.0/sec): Char in 80-char aa line (Charter 10)
16000000 reps @ 0.0003 msec (2980000.0/sec): Char in 80-char aa line (Charter 10)
16000000 reps @ 0.0003 msec (2980000.0/sec): Char in 80-char aa line (Charter 10)
80000000 trep @ 0.0003 msec (2980000.0/sec): Char in 80-char aa line (Charter 10)


Ist das nun gut oder schlecht?

[Silencer_MS]

Mein Ergebnis:

x11perf -aa10text
x11perf - X11 performance program, version 1.5
Gentoo Linux (The X.Org Foundation 6.7.0, revision r1-1.1) server version 60700000 on :0.0
from silencer.localhost
Thu Jul 29 08:55:18 2004

Sync time adjustment is 0.0737 msecs.

16000000 reps @ 0.0004 msec (2830000.0/sec): Char in 80-char aa line (Charter 10)
16000000 reps @ 0.0004 msec (2830000.0/sec): Char in 80-char aa line (Charter 10)
16000000 reps @ 0.0004 msec (2830000.0/sec): Char in 80-char aa line (Charter 10)
16000000 reps @ 0.0004 msec (2830000.0/sec): Char in 80-char aa line (Charter 10)
16000000 reps @ 0.0004 msec (2840000.0/sec): Char in 80-char aa line (Charter 10)
80000000 trep @ 0.0004 msec (2830000.0/sec): Char in 80-char aa line (Charter 10)



Grafikkarte ist eine Geforce2 GTS mit Nvidia-Treiber 1.0.5336 und Xorg-X11 6.7.0

[bluey]

neben Gentoo verblassen sie alle ;D

[labba]

Hi!
Hier meine Werte.... Sys: Athlon XP @ 2300, 512Mb Ram, FX5900 mit 6106, Gentoo mit Kernel 2.6.5:

x11perf - X11 performance program, version 1.5
Gentoo Linux (The X.Org Foundation 6.7.0, revision r0-0.6) server version 60700000 on :0.0
from linux
Thu Jul 29 13:06:38 2004

Sync time adjustment is 0.0290 msecs.

32000000 reps @ 0.0002 msec (5400000.0/sec): Char in 80-char aa line (Charter 10)
32000000 reps @ 0.0002 msec (5370000.0/sec): Char in 80-char aa line (Charter 10)
32000000 reps @ 0.0002 msec (5370000.0/sec): Char in 80-char aa line (Charter 10)
32000000 reps @ 0.0002 msec (5400000.0/sec): Char in 80-char aa line (Charter 10)
32000000 reps @ 0.0002 msec (5380000.0/sec): Char in 80-char aa line (Charter 10)
160000000 trep @ 0.0002 msec (5380000.0/sec): Char in 80-char aa line (Charter 10)

Im Hintergrund lief KDE und Firefox, Farbtiefe: 24bit

Noch was Allgemeines zur Diskussion: Ich kann mich über den 2D Speed nicht pauschaul beklagen, KDE läuft super, da schaff ich es auch nicht mit mehreren Fenstern ein Redraw zu produzieren, bei GTK Apps schaut das aber schon ganz anderes aus: Wenn ich über einen Vollbild Firefox ein anderes Fenster ziehe, dann sehe ich eine ca. 1cm lange Spur... Allerdings sowohl unter Linux als auch unter Windows, wenn auch unter win nicht so stark...

[bluey]

Kann ich nur bestätigen! Wenn in Firefox zB ein Download Fenster sich öffnet, bricht total die Geschwindigkeit ein.

[klutob]

zielscheibe root # cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 10
model name : AMD Athlon(tm) XP 2600+
stepping : 0
cpu MHz : 2058.564
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 4096.00

zielscheibe root #


pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x102b device 0x0525
Matrox Graphics, Inc. MGA G400 AGP
zielscheibe root #




zielscheibe root # x11perf -aa10text
x11perf - X11 performance program, version 1.5
Gentoo Linux (The X.Org Foundation 6.7.0, revision r2-1.2) server version 60700000 on :0.0
from zielscheibe
Thu Jul 29 16:10:02 2004

Sync time adjustment is 0.0318 msecs.

16000000 reps @ 0.0004 msec (2420000.0/sec): Char in 80-char aa line (Charter 10)
16000000 reps @ 0.0004 msec (2420000.0/sec): Char in 80-char aa line (Charter 10)
16000000 reps @ 0.0004 msec (2420000.0/sec): Char in 80-char aa line (Charter 10)
16000000 reps @ 0.0004 msec (2420000.0/sec): Char in 80-char aa line (Charter 10)
16000000 reps @ 0.0004 msec (2420000.0/sec): Char in 80-char aa line (Charter 10)
80000000 trep @ 0.0004 msec (2420000.0/sec): Char in 80-char aa line (Charter 10)

zielscheibe root #

[(del676)]

root@mer (~)# x11perf -aa10text
x11perf - X11 performance program, version 1.5
Gentoo Linux (XFree86 4.3.0, revision r5) server version 40300001 on
:1.0
from mer
Thu Jul 29 16:15:54 2004

Sync time adjustment is 0.0297 msecs.

16000000 reps @ 0.0003 msec (2890000.0/sec): Char in 80-char aa line (Charter 10)
16000000 reps @ 0.0003 msec (2890000.0/sec): Char in 80-char aa line (Charter 10)
16000000 reps @ 0.0003 msec (2900000.0/sec): Char in 80-char aa line (Charter 10)
16000000 reps @ 0.0003 msec (2890000.0/sec): Char in 80-char aa line (Charter 10)
16000000 reps @ 0.0003 msec (2890000.0/sec): Char in 80-char aa line (Charter 10)
80000000 trep @ 0.0003 msec (2890000.0/sec): Char in 80-char aa line (Charter 10)


Matrox G400, P4 2,8, 512MB ram

leider mit vielen programmen im hintergrund (wine mit lotus notes, licq, xchat, firefox), und leider auch noch xfree statt xorg

[Silencer_MS]

So, noch der andere Rechner ;-)
Ati-Treiber (Version 3.90 auf 9700Pro, Athlon XP 2000+, Xfree 4.30)


x11perf -aa10text
x11perf - X11 performance program, version 1.5
Gentoo Linux (XFree86 4.3.0, revision r6) server version 40300001 on :0.0
from silencer.home
Thu Jul 29 19:05:51 2004

Sync time adjustment is 0.0479 msecs.

4000000 reps @ 0.0015 msec (651000.0/sec): Char in 80-char aa line (Charter 10)
4000000 reps @ 0.0015 msec (651000.0/sec): Char in 80-char aa line (Charter 10)
4000000 reps @ 0.0015 msec (653000.0/sec): Char in 80-char aa line (Charter 10)
4000000 reps @ 0.0015 msec (653000.0/sec): Char in 80-char aa line (Charter 10)
4000000 reps @ 0.0016 msec (645000.0/sec): Char in 80-char aa line (Charter 10)
20000000 trep @ 0.0015 msec (650000.0/sec): Char in 80-char aa line (Charter 10)

[Arcanoxer]

Von mein P4:
Mandrake Linux (XFree86 4.3, patch level 30mdk) server version 40300001 on :0.0
from Northwood
Thu Jul 29 20:14:18 2004

Sync time adjustment is 0.0256 msecs.

3200000 reps @ 0.0016 msec (548000.0/sec): Char in 80-char aa line (Charter 10)
3200000 reps @ 0.0016 msec (555000.0/sec): Char in 80-char aa line (Charter 10)
3200000 reps @ 0.0016 msec (554000.0/sec): Char in 80-char aa line (Charter 10)
3200000 reps @ 0.0016 msec (551000.0/sec): Char in 80-char aa line (Charter 10)
3200000 reps @ 0.0016 msec (552000.0/sec): Char in 80-char aa line (Charter 10)
16000000 trep @ 0.0016 msec (552000.0/sec): Char in 80-char aa line (Charter 10)
Für ATi schaut es ja nicht so prima aus, welch wunder...
€dit:
ohne XMMS und Firefox -0.0001 msec :naughty:

[klutob]

@Ulukay

nutzt du die Opensource Matroxtrieber oder die Betas?

[(del676)]

Original geschrieben von klutob
@Ulukay

nutzt du die Opensource Matroxtrieber oder die Betas?

tjo, müsst ich morgen mal nachsehen :)

[HellHorse]

Ehm und jetzt? Wir haben zwar all die schönen Zahlen und können daraus Diagramme zeichnen und Schwanzlängen vergleichen.

Aber irgend eine Interpretationshilfe zu den Resultaten wäre schon sinnvoll.

[Ganon@work]

Original geschrieben von HellHorse
Aber irgend eine Interpretationshilfe zu den Resultaten wäre schon sinnvoll.

Jo. Hab ich weiter oben ja auch schon gefragt.

Sind nett die Zahlen...

Aber nun?

[(del676)]

was und nun?

[Silencer_MS]

The x11perf program runs one or more performance tests and reports how fast an X server can execute the tests.

Steht so im Manual von x11perf
http://www.xfree.org/4.4.0/x11perf.1.html

Ich schätze mal, daß es da keinen Unterschied zwischen Xfree und XOrg gibt ;-)

[nggalai]

[rb@karoshi rb]$ x11perf -aa10text
x11perf - X11 performance program, version 1.5
The X.Org Foundation server version 60700000 on :0.0
from karoshi
Fri Jul 30 09:46:12 2004

Sync time adjustment is 0.0717 msecs.

24000000 reps @ 0.0003 msec (3780000.0/sec): Char in 80-char aa line (Charter 10)
24000000 reps @ 0.0003 msec (3780000.0/sec): Char in 80-char aa line (Charter 10)
24000000 reps @ 0.0003 msec (3790000.0/sec): Char in 80-char aa line (Charter 10)
24000000 reps @ 0.0003 msec (3760000.0/sec): Char in 80-char aa line (Charter 10)
24000000 reps @ 0.0003 msec (3760000.0/sec): Char in 80-char aa line (Charter 10)
120000000 trep @ 0.0003 msec (3780000.0/sec): Char in 80-char aa line (Charter 10)Das ganze mit zuvielen Applikationen im Hintergrund, auf Arch Linux auf GFFX5800.

93,
-Sascha.rb

[Hellspawn]

Bin seit zwei Wochen Linux-User, hab mir ein Sarge(Debian, Testing) von Grund auf gebaut und hab den Test hier entdeckt.. Werte sind ja katastrophal gegen eure:

BakaWS:/home/arab# x11perf -aa10text
x11perf - X11 performance program, version 1.5
The XFree86 Project, Inc server version 40300001 on :0.0
from BakaWS
Fri Jul 30 15:55:43 2004

Sync time adjustment is 0.0354 msecs.

400000 reps @ 0.0149 msec ( 67100.0/sec): Char in 80-char aa line (Charter 10)
400000 reps @ 0.0149 msec ( 66900.0/sec): Char in 80-char aa line (Charter 10)
400000 reps @ 0.0149 msec ( 66900.0/sec): Char in 80-char aa line (Charter 10)
400000 reps @ 0.0149 msec ( 66900.0/sec): Char in 80-char aa line (Charter 10)
400000 reps @ 0.0150 msec ( 66600.0/sec): Char in 80-char aa line (Charter 10)
2000000 trep @ 0.0149 msec ( 66900.0/sec): Char in 80-char aa line (Charter 10)

woran kann das liegen? Sys steht unten, läuft auf Sarge mit 2.6.7 Kernel und Gnome. fglrx 3.9.0 für xfree 4.3.0 ist auch installiert.

mfg

[bluey]

Katastrophal? Würd ich nicht sagen. Die Top Ergebnisse wurden mit Gentoo erzielt. Ganz einfach aus dem Grund das XFree/X.org dort selbst kompiliert und dem jeweiligen Prozessor Optimiert worden ist.

[Nagilum]

Original geschrieben von DocterD
Katastrophal? Würd ich nicht sagen. Die Top Ergebnisse wurden mit Gentoo erzielt. Ganz einfach aus dem Grund das XFree/X.org dort selbst kompiliert und dem jeweiligen Prozessor Optimiert worden ist.
Du schuldest mir ne Tischkante.

[Hellspawn]

Original geschrieben von DocterD
Katastrophal? Würd ich nicht sagen. Die Top Ergebnisse wurden mit Gentoo erzielt. Ganz einfach aus dem Grund das XFree/X.org dort selbst kompiliert und dem jeweiligen Prozessor Optimiert worden ist.

ich hab vom schlechtesten hier ein zehntel.. das kann doch nicht am gentoo liegen! vorseite, mandrake und 9600pro hat das zehnfache bzw ist zehnmal schneller!

Original geschrieben von Arcanoxer
Von mein P4:
Mandrake Linux (XFree86 4.3, patch level 30mdk) server version 40300001 on :0.0
from Northwood
Thu Jul 29 20:14:18 2004

Sync time adjustment is 0.0256 msecs.

3200000 reps @ 0.0016 msec (548000.0/sec): Char in 80-char aa line (Charter 10)
3200000 reps @ 0.0016 msec (555000.0/sec): Char in 80-char aa line (Charter 10)
3200000 reps @ 0.0016 msec (554000.0/sec): Char in 80-char aa line (Charter 10)
3200000 reps @ 0.0016 msec (551000.0/sec): Char in 80-char aa line (Charter 10)
3200000 reps @ 0.0016 msec (552000.0/sec): Char in 80-char aa line (Charter 10)
16000000 trep @ 0.0016 msec (552000.0/sec): Char in 80-char aa line (Charter 10)
Für ATi schaut es ja nicht so prima aus, welch wunder...
€dit:
ohne XMMS und Firefox -0.0001 msec :naughty:

[(del676)]

FX5200


icetee@sunnyserver (~)$ x11perf -aa10text
x11perf - X11 performance program, version 1.5
Gentoo Linux (The X.Org Foundation 6.7.0, revision r1-1.1) server version 60700000 on :0.0
from sunnyserver
Fri Jul 30 19:01:19 2004

Sync time adjustment is 0.0312 msecs.

24000000 reps @ 0.0002 msec (4170000.0/sec): Char in 80-char aa line (Charter 10)
24000000 reps @ 0.0002 msec (4160000.0/sec): Char in 80-char aa line (Charter 10)
24000000 reps @ 0.0002 msec (4170000.0/sec): Char in 80-char aa line (Charter 10)
24000000 reps @ 0.0002 msec (4190000.0/sec): Char in 80-char aa line (Charter 10)
24000000 reps @ 0.0002 msec (4160000.0/sec): Char in 80-char aa line (Charter 10)
120000000 trep @ 0.0002 msec (4170000.0/sec): Char in 80-char aa line (Charter 10)

[Nagilum]

Leider nur aus'em Kopp: ~550000/sec
Athlon 1800, Radeon 9500 Pro, XFree86 4.3.0, Debian Unstable


@Hellhorse
Natürlich ist Gentoo um den Faktor 10 schneller. So ein paar Compileroptionen schaffen schon was weg. :eyes:

Poste vielleicht mal die relevanten Ausschnitte deiner XF86Config4 und der Ausgabe von "xdpyinfo". Vielleicht findet sich ja was.

[Hellspawn]

Original geschrieben von Nagilum
Leider nur aus'em Kopp: ~550000/sec
Athlon 1800, Radeon 9500 Pro, XFree86 4.3.0, Debian Unstable


@Hellhorse
Natürlich ist Gentoo um den Faktor 10 schneller. So ein paar Compileroptionen schaffen schon was weg. :eyes:

Poste vielleicht mal die relevanten Ausschnitte deiner XF86Config4 und der Ausgabe von "xdpyinfo". Vielleicht findet sich ja was.

hmm der Nickname ist Hellspawn, danke ;)
schön, aber mandrake auch?

Auszug(soviel mir mein Aterm an cache hergibt hehe):

depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x54
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x55
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x56
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x57
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x58
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x59
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x5a
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x5b
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x5c
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x5d
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x5e
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x5f
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x60
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x61
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits
visual:
visual id: 0x62
class: DirectColor
depth: 24 planes
available colormap entries: 256 per subfield
red, green, blue masks: 0xff0000, 0xff00, 0xff
significant bits in color specification: 8 bits

[Nagilum]

Original geschrieben von Hellspawn
hmm der Nickname ist Hellspawn, danke ;)

Hupps. Keine Absicht. :stareup: Einfach zu viele Söhne der Hölle hier. :)

Auszug(soviel mir mein Aterm an cache hergibt hehe):
Da hast du ja zielsicher genau den langweiligsten Abschnitt erwischt. Zeig mal bitte welche Extensions du lädst, wie deine ATI spezifischen Einstellungen aussehen, und welche Extensions dann tatsächlich geladen werden.

Edit: Achso. Du hast ein Problem mit Copy&Paste? Probier mal "xdpyinfo > xdpyinfo.txt". Dann wird die komplette Ausgabe in eine Datei umgeleitet.

[Spartakus]

Original geschrieben von Nagilum
Du schuldest mir ne Tischkante.

*rofl*

[Hellspawn]

@nagilum: danke für deine mühen, hier jetzt mal der(hoffentlich richtige) ausschnitt:


name of display: :0.0
version number: 11.0
vendor string: The XFree86 Project, Inc
vendor release number: 40300001
XFree86 version: 4.3.0.1
maximum request size: 4194300 bytes
motion buffer size: 256
bitmap unit, bit order, padding: 32, LSBFirst, 32
image byte order: LSBFirst
number of supported pixmap formats: 7
supported pixmap formats:
depth 1, bits_per_pixel 1, scanline_pad 32
depth 4, bits_per_pixel 8, scanline_pad 32
depth 8, bits_per_pixel 8, scanline_pad 32
depth 15, bits_per_pixel 16, scanline_pad 32
depth 16, bits_per_pixel 16, scanline_pad 32
depth 24, bits_per_pixel 32, scanline_pad 32
depth 32, bits_per_pixel 32, scanline_pad 32
keycode range: minimum 8, maximum 255
focus: window 0x3000002, revert to PointerRoot
number of extensions: 31
ATIFGLEXTENSION
ATIFGLRXDRI
ATITVOUT
BIG-REQUESTS
DOUBLE-BUFFER
DPMS
Extended-Visual-Information
FontCache
GLX
LBX
MIT-SCREEN-SAVER
MIT-SHM
MIT-SUNDRY-NONSTANDARD
RANDR
RENDER
SECURITY
SGI-GLX
SHAPE
SYNC
TOG-CUP
X-Resource
XC-APPGROUP
XC-MISC
XFree86-Bigfont
XFree86-DRI
XFree86-Misc
XFree86-VidModeExtension
XInputExtension
XKEYBOARD
XTEST
XVideo
default screen number: 0
number of screens: 1

screen #0:
dimensions: 1024x768 pixels (347x260 millimeters)
resolution: 75x75 dots per inch
depths (7): 24, 1, 4, 8, 15, 16, 32
root window id: 0x76
depth of root window: 24 planes
number of colormaps: minimum 1, maximum 1
default colormap: 0x20
default number of colormap cells: 256
preallocated pixels: black 0, white 16777215
options: backing-store NO, save-unders NO
largest cursor: 64x64
current input event mask: 0xfa2033
KeyPressMask KeyReleaseMask EnterWindowMask
LeaveWindowMask ButtonMotionMask StructureNotifyMask
SubstructureNotifyMask SubstructureRedirectMask FocusChangeMask
PropertyChangeMask ColormapChangeMask

[Nagilum]

nagilum@nagilum:~$ diff -wE log1.txt log2.txt
19c19
< focus: window 0x2000007, revert to PointerRoot
---
> focus: window 0x3000002, revert to PointerRoot
56,57c56,57
< dimensions: 1152x864 pixels (366x274 millimeters)
< resolution: 80x80 dots per inch
---
> dimensions: 1024x768 pixels (347x260 millimeters)
> resolution: 75x75 dots per inch
59c59
< root window id: 0x46
---
> root window id: 0x76
67,70c67,71
< current input event mask: 0xda4031
< KeyPressMask EnterWindowMask LeaveWindowMask
< KeymapStateMask StructureNotifyMask SubstructureNotifyMask
< SubstructureRedirectMask PropertyChangeMask ColormapChangeMask
---
> current input event mask: 0xfa2033
> KeyPressMask KeyReleaseMask EnterWindowMask
> LeaveWindowMask ButtonMotionMask StructureNotifyMask
> SubstructureNotifyMask SubstructureRedirectMask FocusChangeMask
> PropertyChangeMask ColormapChangeMask


Das kommt dabei raus, wenn ich deine und meine Ausgabe miteinander vergleiche. Bis auf die unterschiedlichen Ereignissenmasken alles gleich. Hmmm. Seltsam das. Hau uns doch mal deine XF86Config4 um die Ohren, bitte.

[Hellspawn]

Original geschrieben von Nagilum
Das kommt dabei raus, wenn ich deine und meine Ausgabe miteinander vergleiche. Bis auf die unterschiedlichen Ereignissenmasken alles gleich. Hmmm. Seltsam das. Hau uns doch mal deine XF86Config4 um die Ohren, bitte.

aber herzlich gerne ;) (is halt sehr lang hehe)


# File: XF86Config-4
# File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.

# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"

# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

# FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path. The default path is shown here.

# ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "de"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/psaux"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
Identifier "Monitor0"
HorizSync 30-69
VertRefresh 50-120
Option "DPMS"

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection


Section "Monitor"
Identifier "Monitor1"
HorizSync 30-69
VertRefresh 50-120
Option "DPMS"

# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
# SVGA @ 100Hz
# Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
# XVGA @ 100Hz
# Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
# 1152x864 @ 60Hz
# Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
# 1152x864 @ 85Hz
# Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
# 1152x864 @ 100Hz
# Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
# 1280x960 @ 75Hz
# Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
# 1280x960 @ 100Hz
# Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017 +hsync +vsync
# SXGA @ 100Hz
# Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
# SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062 -hsync -vsync
# 1600x1000 @ 60Hz
# Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
# 1600x1000 @ 75Hz
# Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
# 1600x1000 @ 85Hz
# Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
# 1600x1000 @ 100Hz
# Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
# 1600x1024 @ 60Hz
# Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
# 1600x1024 @ 75Hz
# Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
# 1600x1024 @ 76Hz
# Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
# 1600x1024 @ 85Hz
# Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
# 1920x1080 @ 60Hz
# Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
# 1920x1080 @ 75Hz
# Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
# 1920x1200 @ 60Hz
# Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
# 1920x1200 @ 75Hz
# Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 2048x1536 @ 60
# Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
# 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
# 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
# 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
# Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"

# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "0x00000100"
Option "MonitorLayout" "CRT, STV"
Option "IgnoreEDID" "off"
Option "HSync2" "30-69"
Option "VRefresh2" "50-120"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "no"
Option "TVStandard" "PAL-B"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "1"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
BusID "PCI:2:0:0" # vendor=1002, device=4e48
Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"

Subsection "Display"
Depth 24
Modes "1024x768"
ViewPort 0 0 # initial origin if mode is smaller than desktop
# Virtual 1280 1024
EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
Identifier "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

Screen "Screen0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###

[Hellspawn]

Hab das Problem selbst in die Hand genommen und mir x.org kompiliert. Hier die Werte mit ein paar laufenden Apps im Hintergrund auf barton 2100mhz und Radeon 9800pro(3.9.0) in Gnome.

x11perf - X11 performance program, version 1.5
The X.Org Foundation server version 60700000 on :0.0
from BakaWS
Fri Aug 6 09:06:08 2004

Sync time adjustment is 0.0394 msecs.

4000000 reps @ 0.0013 msec (759000.0/sec): Char in 80-char aa line (Charter 10)
4000000 reps @ 0.0013 msec (754000.0/sec): Char in 80-char aa line (Charter 10)
4000000 reps @ 0.0013 msec (774000.0/sec): Char in 80-char aa line (Charter 10)
4000000 reps @ 0.0013 msec (755000.0/sec): Char in 80-char aa line (Charter 10)
4000000 reps @ 0.0013 msec (769000.0/sec): Char in 80-char aa line (Charter 10)
20000000 trep @ 0.0013 msec (762000.0/sec): Char in 80-char aa line (Charter 10)

ohne ati treiber bin ich 10msec schneller lol..

[CannedCaptain]

x11perf - X11 performance program, version 1.5
Gentoo Linux (The X.Org Foundation 6.7.0, revision r1-1.1.1) server version 60700000 on :0.0
from christian
Fri Aug 6 09:12:14 2004

Sync time adjustment is 0.0741 msecs.

24000000 reps @ 0.0003 msec (3570000.0/sec): Char in 80-char aa line (Charter 10)
24000000 reps @ 0.0003 msec (3570000.0/sec): Char in 80-char aa line (Charter 10)
24000000 reps @ 0.0003 msec (3570000.0/sec): Char in 80-char aa line (Charter 10)
24000000 reps @ 0.0003 msec (3570000.0/sec): Char in 80-char aa line (Charter 10)
24000000 reps @ 0.0003 msec (3570000.0/sec): Char in 80-char aa line (Charter 10)
120000000 trep @ 0.0003 msec (3570000.0/sec): Char in 80-char aa line (Charter 10)


gentoo 2004.4 / gentoo-dev-sources 2.6.7 / xorg / kde
AMD Athlon XP 2000+ / VIA KT333 / 512 MB DDR @ 333 MHZ /GF4200ti

[CannedCaptain]

Kann es ein, dass es hier eher ati vs. nvidia ist, was die differenzen angeht. Ich meine die ati-treiber sind wirklich crap.

[RaumKraehe]

Original geschrieben von Silencer_MS
The x11perf program runs one or more performance tests and reports how fast an X server can execute the tests.

Steht so im Manual von x11perf
http://www.xfree.org/4.4.0/x11perf.1.html

Ich schätze mal, daß es da keinen Unterschied zwischen Xfree und XOrg gibt ;-)

Da steht auch das mann die Test auf einem frisch gestartetem X-Server machen soll.

Und warum machen wir nicht: x11perf -all?

Edit: Ok es dauert ewig ;D

[Exxtreme]

Der neue ATi-Treiber hat etwas zugelegt:


alex@Linux1 alex $ x11perf -aa10text
x11perf - X11 performance program, version 1.5
Gentoo Linux (The X.Org Foundation 6.7.0, revision r1-1.1.1) server version 60700000 on :0.0
from Linux1
Fri Aug 6 18:59:40 2004

Sync time adjustment is 0.0274 msecs.

4000000 reps @ 0.0014 msec (731000.0/sec): Char in 80-char aa line (Charter 10)
4000000 reps @ 0.0014 msec (729000.0/sec): Char in 80-char aa line (Charter 10)
4000000 reps @ 0.0014 msec (727000.0/sec): Char in 80-char aa line (Charter 10)
4000000 reps @ 0.0014 msec (730000.0/sec): Char in 80-char aa line (Charter 10)
4000000 reps @ 0.0014 msec (729000.0/sec): Char in 80-char aa line (Charter 10)
20000000 trep @ 0.0014 msec (729000.0/sec): Char in 80-char aa line (Charter 10)

[Hellspawn]

hmm ich werd sie mal probieren

/edit: bin noch zu lame, werds morgen nochmal probieren.. der spuckt bei der installation nur
Entpacke fglrx (aus fglrx_4.3.0-4.11_i386.deb) ...
dpkg: Fehler beim Bearbeiten von fglrx_4.3.0-4.11_i386.deb (--install):
versuche »/usr/X11R6/lib/libGL.so.1.2« zu überschreiben, welches auch in Paket xlibmesa-gl ist
dpkg-deb: Unterprozess paste getötet mit Signal (Datenübergabe unterbrochen (broken pipe))
Fehler traten auf beim Bearbeiten von:
fglrx_4.3.0-4.11_i386.deb
aus... damn
naja ich installier wieder die 3.9.0

[bluey]

Gentoo Linux (The X.Org Foundation 6.7.0, revision r2-1.2) server version 60700000 on :0.0
from Gentoo
Fri Aug 6 19:44:10 2004

Sync time adjustment is 0.0183 msecs.

4800000 reps @ 0.0012 msec (801000.0/sec): Char in 80-char aa line (Charter 10)
4800000 reps @ 0.0012 msec (801000.0/sec): Char in 80-char aa line (Charter 10)
4800000 reps @ 0.0012 msec (801000.0/sec): Char in 80-char aa line (Charter 10)
4800000 reps @ 0.0012 msec (801000.0/sec): Char in 80-char aa line (Charter 10)
4800000 reps @ 0.0012 msec (801000.0/sec): Char in 80-char aa line (Charter 10)
24000000 trep @ 0.0012 msec (801000.0/sec): Char in 80-char aa line (Charter 10)


mit denn aktuellen ATI Treibern.