USB-Stick/6in1 Cardreader mounten

[ActionNews]

Grüß euch.

Also ich hab durch zufall herausgefunden, dass mein USB-Stick auf /dev/sde1 reagiert. Als root kann ich den auch in der Konsole einwandfrei mounten. Folgendes hab ich in der /etc/stab:
/dev/sde1 /mnt/usb auto user,noauto,unhide 0 0
Allerdings nur so: "mount /dev/sde1 /mnt/usb" und nicht als normaler user.
Wie bekomme ich es hin, dass auch user den Stick mounten können?
Und was mich auch interessieren würde, wäre wie ich es anstelle, dass der Stick automatisch gemauntet wird wenn ich ihn einstöpsle?

Und als letztes Ich hab einen 6in1 Cardreader der bei meinem FSC Scaleo 600 schon eingebaut ist. Ich hab dazu eine Anleitung gefunden und folgendes in die fstab eingetragen.
/dev/sda1 /mnt/card_cf auto noauto,user 0 2
/dev/sdb1 /mnt/card_ms auto noauto,user 0 2
/dev/sdc1 /mnt/card_sd auto noauto,user 0 2
/dev/sdd1 /mnt/card_sm auto noauto,user 0 2

Leider kann ich den card reader trotzdem nicht mounten (card_sd bei mir).
Ich bekomme folgende Fehler meldung: "mount: special device /dev/sdc1 does not exist" Also wie finde ich raus unter welchem Device das ding angesprochen wird?

CU ActionNews

[MorLipf]

Sind die Namen der Gerätedateien korrekt für den Cardreader? Meiner nennt sich /dev/sdc. /dev/sdd, /dev/sde und /dev/sdf. Vielleicht ist es ja bei dir auch so.

[(del676)]

Grüß euch.

Also ich hab durch zufall herausgefunden, dass mein USB-Stick auf /dev/sde1 reagiert. Als root kann ich den auch in der Konsole einwandfrei mounten. Folgendes hab ich in der /etc/stab:
/dev/sde1 /mnt/usb auto user,noauto,unhide 0 0
Allerdings nur so: "mount /dev/sde1 /mnt/usb" und nicht als normaler user.
Wie bekomme ich es hin, dass auch user den Stick mounten können?
Und was mich auch interessieren würde, wäre wie ich es anstelle, dass der Stick automatisch gemauntet wird wenn ich ihn einstöpsle?

Und als letztes Ich hab einen 6in1 Cardreader der bei meinem FSC Scaleo 600 schon eingebaut ist. Ich hab dazu eine Anleitung gefunden und folgendes in die fstab eingetragen.
/dev/sda1 /mnt/card_cf auto noauto,user 0 2
/dev/sdb1 /mnt/card_ms auto noauto,user 0 2
/dev/sdc1 /mnt/card_sd auto noauto,user 0 2
/dev/sdd1 /mnt/card_sm auto noauto,user 0 2

Leider kann ich den card reader trotzdem nicht mounten (card_sd bei mir).
Ich bekomme folgende Fehler meldung: "mount: special device /dev/sdc1 does not exist" Also wie finde ich raus unter welchem Device das ding angesprochen wird?

CU ActionNews

anstecken - karte rein - dmesg

[ActionNews]

Es ist ein interner USB-Card-reader und momentan ist mein Bruder mit der Digicam unterwegs, sodass ich gerade keine SD-card zum testen da hab, aber wenn er wieder da ist schaue ich mal was dmesg ausgibt wenn ich die sd-card einstöpsle.

Noch jemand einen Tipp warum ich den USB-Stick nur als root mounten kann? Ähnliche einstellungen in der fstab hab ich für das DVD-Laufwerk und DVD-Brenner. Die lassen sich einwandfrei als user mounten.
/dev/cdroms/cdrom1 /mnt/brenner auto ro,user,noauto,unhide 0 0
/dev/cdroms/cdrom0 /mnt/dvd auto ro,user,noauto,unhide 0 0
/dev/sde1 /mnt/usb auto user,noauto,unhide 0 0

CU ActionNews

[ActionNews]

Hmm, ok es passiert gar nix wenn man die sd-card einsteckt :D. Zumindest meldet dmesg nichts.

Und nun :D? ...

CU ActionNews

[(del676)]

den gesamten reader (MIT karte) am usb mal aus und wieder anstöpseln?

[ActionNews]

Es ist wie gesagt ein interner USB-Reader (guck den Link "Mein System" in meiner Sig an da sieht man es). Aber ich kann ja mal den PC aufmachen und gucken wo man den Reader abstöpseln kann :D.

EDIT: Ganz toll :( ... ist ein extra Stecker der direkt auf das Mainboard geht und ganz und gar nicht nach USB aussieht. Während des Betriebes sollte ich da wohl besser nix umstöpseln ;). Ist aber laut Beschreibunge ein USB-Card Reader.

CU ActionNews

[(del676)]

Es ist wie gesagt ein interner USB-Reader (guck den Link "Mein System" in meiner Sig an da sieht man es). Aber ich kann ja mal den PC aufmachen und gucken wo man den Reader abstöpseln kann :D.

EDIT: Ganz toll :( ... ist ein extra Stecker der direkt auf das Mainboard geht und ganz und gar nicht nach USB aussieht. Während des Betriebes sollte ich da wohl besser nix umstöpseln ;). Ist aber laut Beschreibunge ein USB-Card Reader.

CU ActionNews

tjo welcher isses denn?

[ActionNews]

Sorry, aber ist nicht besonders scharf geworden :D (einfach schnell im Dunklen Gehäuse mit Blitz photographiert :D). Der hier ist es:
http://www.pvr-actionnews.de/CardReaderStecker1.jpg

CU ActionNews

[(del676)]

Sorry, aber ist nicht besonders scharf geworden :D (einfach schnell im Dunklen Gehäuse mit Blitz photographiert :D). Der hier ist es:
http://www.pvr-actionnews.de/CardReaderStecker1.jpg

CU ActionNews

jo das is eh ein usb - nur halt einfach belegt

[ActionNews]

OK also das ist was dmesg ausspuckt (Zeigt wohl leider nicht alles):

usb-storage: Status code 0; transferred 36/36
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x2a R 0 Stat 0x0
usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 40 00 00 28 00
usb-storage: Bulk Command S 0x43425355 T 0x2b L 40 F 128 Trg 0 LUN 2 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 40 bytes
usb-storage: Status code 0; transferred 40/40
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x2b R 0 Stat 0x0
usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
Vendor: Generic Model: STORAGE DEVICE Rev: 0125
Type: Direct-Access ANSI SCSI revision: 02
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 40 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x2c L 0 F 0 Trg 0 LUN 2 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x2c R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command READ_CAPACITY (10 bytes)
usb-storage: 25 40 00 00 00 00 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x2d L 8 F 128 Trg 0 LUN 2 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes
usb-storage: Status code 0; transferred 8/8
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x2d R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
SCSI device sdc: 499712 512-byte hdwr sectors (256 MB)
sdc: assuming Write Enabled
sdc: assuming drive cache: write through
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 40 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x2e L 0 F 0 Trg 0 LUN 2 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x2e R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
usb-storage: 1e 40 00 00 01 00
usb-storage: Bulk Command S 0x43425355 T 0x2f L 0 F 0 Trg 0 LUN 2 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x2f R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
/dev/scsi/host1/bus0/target0/lun2:<7>usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command READ_10 (10 bytes)
usb-storage: 28 40 00 00 00 00 00 00 08 00
usb-storage: Bulk Command S 0x43425355 T 0x30 L 4096 F 128 Trg 0 LUN 2 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
usb-storage: Status code 0; transferred 4096/4096
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x30 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
p1
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
usb-storage: 1e 40 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x31 L 0 F 0 Trg 0 LUN 2 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x31 R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
Attached scsi removable disk sdc at scsi1, channel 0, id 0, lun 2
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 60 00 00 24 00
usb-storage: Bulk Command S 0x43425355 T 0x32 L 36 F 128 Trg 0 LUN 3 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes
usb-storage: Status code 0; transferred 36/36
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x32 R 0 Stat 0x0
usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 60 00 00 28 00
usb-storage: Bulk Command S 0x43425355 T 0x33 L 40 F 128 Trg 0 LUN 3 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 40 bytes
usb-storage: Status code 0; transferred 40/40
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x33 R 0 Stat 0x0
usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
Vendor: Generic Model: STORAGE DEVICE Rev: 0125
Type: Direct-Access ANSI SCSI revision: 02
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 60 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x34 L 0 F 0 Trg 0 LUN 3 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x34 R 0 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0x80000034 L 18 F 128 Trg 0 LUN 3 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x80000034 R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
usb-storage: (Unknown Key): (unknown ASC/ASCQ)
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 60 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x35 L 0 F 0 Trg 0 LUN 3 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x35 R 0 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0x80000035 L 18 F 128 Trg 0 LUN 3 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x80000035 R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
usb-storage: (Unknown Key): (unknown ASC/ASCQ)
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 60 00 00 00 00
usb-storage: Bulk Command S 0x43425355 T 0x36 L 0 F 0 Trg 0 LUN 3 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x36 R 0 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0x80000036 L 18 F 128 Trg 0 LUN 3 CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0x80000036 R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x2, ASC: 0x3a, ASCQ: 0x0
usb-storage: (Unknown Key): (unknown ASC/ASCQ)
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
Attached scsi removable disk sdd at scsi1, channel 0, id 0, lun 3
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad LUN (0:4)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (1:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (2:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (3:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (4:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (5:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (6:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (7:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
USB Mass Storage device found at 2


/dev/sdc bzw. /dev/scsi/host1/bus0/target0/lun2/disc :D ist dann wohl meine SD-Card? Und /dev/sda bis /dev/sdd sollten die vier Slots des CardReaders sein.

Jetzt müsste ich nur noch wissen welches Dateisystem. Mit "auto" in der fstab bekomme ich nur ein "mount: you must specify the filesystem type".

CU ActionNews

[(del676)]

cat /proc/scsi/scsi
cat /proc/partitions

schadet sicher auch nie

und FS tippe ich mal auf vfat

[ActionNews]

vfat war das erste was ich probiert habe ;). Geht net. Na ich teste mal deine Tips.

EDIT: cat /proc/scsi/scsi
Attached devices:
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: Generic Model: STORAGE DEVICE Rev: 0125
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 01
Vendor: Generic Model: STORAGE DEVICE Rev: 0125
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 02
Vendor: Generic Model: STORAGE DEVICE Rev: 0125
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 03
Vendor: Generic Model: STORAGE DEVICE Rev: 0125
Type: Direct-Access ANSI SCSI revision: 02
[root@ArchAddict mike]# cat /proc/partitions
major minor #blocks name

3 0 245117376 hda
3 1 154183837 hda1
3 2 1 hda2
3 5 90638698 hda5
3 6 248976 hda6
8 0 249856 sda
8 1 249805 sda1
8 32 249856 sdc
8 33 249805 sdc1


CU ActionNews

[(del676)]

vfat war das erste was ich probiert habe ;). Geht net. Na ich teste mal deine Tips.

EDIT: cat /proc/scsi/scsi
Attached devices:
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: Generic Model: STORAGE DEVICE Rev: 0125
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 01
Vendor: Generic Model: STORAGE DEVICE Rev: 0125
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 02
Vendor: Generic Model: STORAGE DEVICE Rev: 0125
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 03
Vendor: Generic Model: STORAGE DEVICE Rev: 0125
Type: Direct-Access ANSI SCSI revision: 02
[root@ArchAddict mike]# cat /proc/partitions
major minor #blocks name

3 0 245117376 hda
3 1 154183837 hda1
3 2 1 hda2
3 5 90638698 hda5
3 6 248976 hda6
8 0 249856 sda
8 1 249805 sda1
8 32 249856 sdc
8 33 249805 sdc1


CU ActionNews

du versuchst schon /dev/sdc1 zu mounten?

[ActionNews]

Ups :eyes: ... :D :tongue:

OK mounten geht. Und sogar als normaler User :).
Danke für die Hilfe Ulukay :).

CU ActionNews

[(del676)]

Ups :eyes: ... :D :tongue:

OK mounten geht. Und sogar als normaler User :).
Danke für die Hilfe Ulukay :).

CU ActionNews

np :)

[ActionNews]

Hmm ... nur warum kann ich meinen USB-Stick so nicht mounten?

mount /dev/sde1
mount: wrong fs type, bad option, bad superblock on /dev/scsi/host2/bus0/target0/lun0/part1,
or too many mounted file systems

fstab-Eintrag:
/dev/scsi/host2/bus0/target0/lun0/part1 /mnt/usb auto user,noauto,unhide 0 2

CU ActionNews

[(del676)]

FS=vfat oder (ned auto)

[ActionNews]

Nutzt nix, selbe Fehlermeldung.

CU ActionNews

[(del676)]

lösch es aus der fstab raus und
mount -t vfat /dev/sde3 /mnt

kommt dann auch noch ne fehlermeldung?

[ActionNews]

So geht es:
mount -t vfat /dev/sde1 /mnt/usb
Allerdings nur als root.

CU ActionNews

[(del676)]

jo dann schreib das mal rein in die fstab ;)

/dev/sde1 /mnt vfat user,defaults 0 0

[ActionNews]

Da hätte ich auch alleine drauf kommen können ;). Danke. Es funktioniert :).

CU ActionNews

[(del676)]

Da hätte ich auch alleine drauf kommen können ;). Danke. Es funktioniert :).

CU ActionNews

NP

[Meth]

Moin, ich hab hier auch nen 12 in 1 Reader, und krieg ihn einfach nicht gemounted!
/dev/sdxx ist bei mir garnicht vorhanden undder /dev/scsi ordner ist auch leer, ahbt ihr vielleicht nen Tip?

thx meth