PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : ATI liefert PCI-E Chipsätze aus


Gast
2004-10-08, 14:00:44
ATI already shipping PCI Express chipsets for AMD K8 platform (http://www.digitimes.com/news/a20041008PR203.html)

reunion
2004-10-08, 19:14:52
Verkauf der PCI Express Chipsets für die AMD64 Plattform hat begonnen:

Der erste offiziell angekündigte Mainboard-Chipsatz mit Unterstützung für PCI Express und die AMD64 Prozessoren ist bekanntlich der im September vorgestellte VIA K8T890. Eigentlich war zuvor noch mit dem ATI RX480 Chipset mit ähnlichen Features gerechnet worden, aber auf dessen offizielle Einführung warten wir noch. Die Auslieferung der ersten PCI-E Chipsätze von ATI für Opteron und Athlon 64 hat aber bereits begonnen, wie ATI-Chef Dave Orton anlässlich der Verkündung des letzten Quartalsergebnisses verriet.
ATI ist laut Orton mit der Akzeptanz von RX480 und RS480 für AMD64 sowie RS400 für die Intel Pentium 4 Plattform sehr zufrieden. RS480 und RS400 verfügen über integrierte DirectX 9.0 Grafik. Es wird erwartet, dass der Chiphersteller eine formelle Ankündigung über die Auslieferung seiner PCI Express Chipsätze in Kürze folgen lässt.
Die Chips lässt ATI in 130nm Prozesstechnologie bei TSMC in Taiwan fertigen. Gegen Ende des Jahres soll deren Produktion aber auf 110nm Technik umgestellt werden.

http://www.hartware.de/news_37269.html

StefanV
2004-10-08, 19:48:51
LOL; auch nicht übel X-D

Aber sowas sagte ATI letztens erst:
Man kündigt nur das an, was man auch liefern kann,,,,

Gast
2004-10-08, 21:28:44
LOL; auch nicht übel X-D

Aber sowas sagte ATI letztens erst:
Man kündigt nur das an, was man auch liefern kann,,,,

wie bei der X800XT und XT-PE gesehen *hust*

VooDoo7mx
2004-10-09, 00:11:20
Ja du sagst es, Stefan!
ATI ist super! Die halten wenigstens was sie versprechen. :up:

()V()r.Freeze
2004-10-10, 18:41:51
Nehme mal an dass sie einen weltweit gleichzeitigen Release oder so vorbereiten.

Gruß Freeze

reunion
2004-10-21, 18:21:36
IT MIGHT BE called Radeon Xpress but we are still unsure about the name of ATI's first Athlon 64/FX/Opteron chipset.
We know it will come in two versions. The first codenamed RS480 is IGP (Integrated Graphic Processor) chipset while the second one is RX480.

We managed to get a nice picture of ATI reference RS480 board. It has an actively cooled north bridge, four memory slots, PCIe 16X, two PCIe 1X, two PCI slots and one unidentified slot.

We noticed four S-ATA connectors and good old IDE connectors on board followed by a floppy one.

At the back you get VGA out, S VIDEO, four USBs, Firewire and LAN card as well as AC 97 sound. The ATI board also uses a Via chip, possibly for sound. Ironic isn’t it?

This chipset should be introduced in the next few weeks. µ

Here is the picture.


http://www.the-inquirer.net/images/articles/RS480.jpg


http://www.the-inquirer.net/?article=19214

StefanV
2004-10-21, 18:24:34
Hm, interessant =)

Naja, mal abwarten, wie das Endprodukt ausschaut.

Wie dem auch sei, der VIA Chip dürfte ein VT630x sein und ein paar IEE1394 Ports bereitstellen...

HOT
2004-10-22, 08:12:49
wow ein 130 bzw. 110nm gefertigter Chipset ;)
Sind die neuen alle in einem aktuellen Fertigungsprozess gefertigt? Kann ich mir bei VIA und Intel kaum vorstellen :D Na ja ist auch irrelevant :)
ich stell mir nur grad die Frage, ob auf dem Ref Board auch die ULi Supersouth drauf ist.

reunion
2004-11-03, 00:08:32
RX480 is Radeon Xpress 200 P, RS480 is Radeon Xpress 200

WE HAVE some more information about ATI's future chipsets. These are ATI's response to the move to PCI Express, and will compete with Nforce 4 standard and Ultra and Via's K8T890 chipset.
Radeon Xpress 200 G and non G will support all socket Athlon 64/FX and Opteron CPUs, dual channel memory, PCIe 16X + four PCIe 1X slots, PCI slots, eight USB ports, AC 97 audio, four S-ATA drives, two parallel ports and Raid 0 and 1. As you notice, it doesn't have any LAN support even though Nvidia and Via do support this feature.

So ATI has two chipsets on the way - one with integrated graphic and one without. At least for a time, ATI will remain alone in the integrated PCIe area and its chipset will provide quite powerful graphic power, for a chipset of course. It is based on RV370, X300 core and it will use UMA (unified memory architecture).

We are talking about full DirectX 9 core inside the chipset and this core should be much more powerful than Intel's 915G Extreme Graphic 2.

The discrete chipset will be pin compatible with the IGP one and the only real difference between them will be lack of integrated graphic core in discrete chipset.

ATI will continue its Surround view strategy where it will enable you to use up to three displays when you use an external ATI PCIe card and IGP on board graphic.

The ATI chipset is a bifurcated answer, just like Via's K8T890 chipset but I am sure that ATI has to be price competitive as we hearing that it has already won some significant OEM and retail motherboard deals.

ATI is supposed to launch this chipset next week and to have it available shortly after.

ATI RS400 integrated Pentium 4 chipset will come later. µ


http://www.the-inquirer.net/?article=19424

tombman
2004-11-03, 01:59:37
kein SLi? --> *draufpiss* :D

reunion
2004-11-03, 13:50:08
kein SLi? --> *draufpiss* :D

Logisch das ATi keine NV-Technik fördert/unterstützt.

Madkiller
2004-11-03, 17:33:23
Logisch das ATi keine NV-Technik fördert/unterstützt.
ATi zieht wohl in absehbarer Zeit nach, mit SLI. :)
http://www.hardtecs4u.com/?id=1099426972,88300,ht4u.php

reunion
2004-11-04, 21:55:55
Logisch das ATi keine NV-Technik fördert/unterstützt.

Oder doch nicht? :D

In einem Interview bei Ocworkbench.com gab Jon Carvill, PR Manager von Ati, offensichtlich einen Hinweis auf einen geplanten Chipsatz von Ati. Die Chipsatzlösung soll den parallelen Betrieb zweier Grafikkarten ermöglichen. Auf die Frage, ob Pläne für Dual-GPU-Karten seitens Ati bestünden, antwortete er nämlich: "It should be noted that our cards can already support dual GPU configurations in such platforms as Alienware's ALX. We have a strategy in place for dual GPU's on the chipset side but it would be premature to discuss at this time."


http://www.pcgames.de/?article_id=336201

reunion
2004-11-05, 12:59:48
ATI will formally launch its Radeon Xpress 200 chipset family on 8 November, sources familiar with the company's plans have told The Register.

The chipsets, which target both Intel's Pentium 4 and AMD's Athlon 64 processors, and support PCI Express, have been shipping in small quantities to motherboard makers for since early October, ATI CEO Dave Orton revealed during that month.

In the intervening weeks, the mobo companies have been evaluating the part and now seem ready to commit to the parts. According to a DigiTimes report, the Radeon Xpress 200 and the 200G - the latter with integrated graphics, the former without - will go into full-scale production during the middle of this month.

That will follow next week's unveiling. Last month, Orton said the company was waiting to get the numbers up before formally introducing the products, and it now appears that ATI is ready to do just that.

Our sources suggest ATI will be pitching the products well below Nvidia's rival, AMD-only nForce 4 chipsets, with the aim of seeing mobos based on the part shipping for almost half what nForce 4 boards cost. To do so, the chipsets ship without certain high-end features, such as Dolby audio and LAN support - the kind of elements board makers like to add themselves the better to differentiate their products from the competition.

Despite that, ATI has worked to boost the chipsets' performance. "ATI's chipsets have never offered bad system performance, but they've been below par," one source said. "Now they're on a par if not better [than rival chipsets]."

Those rivals include not only nForce 4, but VIA's K8T980 and product from SiS.

http://www.theregister.com/2004/11/04/ati_radeon_xpress/

duckofdeath
2004-11-05, 21:57:18
nur so von der theorie her: sollten chipsätze in 0,13 bzw 0,11µ nicht viel kühler bleiben?

MechWOLLIer
2004-11-06, 09:47:55
nur so von der theorie her: sollten chipsätze in 0,13 bzw 0,11µ nicht viel kühler bleiben?
Theoretisch schon, aber teilweise wird der Effekt durch steigende Leckströme wieder zunichte gemacht.