PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : X1600Pro nur als X1300 erkannt


Grobiii
2006-07-24, 18:20:08
Hallo,

hab mir letztens die GeCube x1600Pro Passiv für meine Barebone zugelegt. Funzt soweit alles, komisch nur das sie in allen Windows und ATI Tools nur als x1300 erkannt bzw. ausgewiesen wird.

Jemand ne Idee?!

AnarchX
2006-07-24, 18:23:26
Da wird es wohl keine X1600 sein und dich hat jemand übers Ohr gehauen. ;)
Mach mal ein Bild von der Karte...

bl1zZ
2006-07-24, 18:24:19
Jo wär auch für ein Bild

Grobiii
2006-07-24, 19:01:50
Ich glaube nicht das "Conrad" mich übers Ohr haut. Und desweiteren gibt es keine x1300 Karte von Gecube mit SilentPipe.

http://www.gecube.com/cms_file.php?id=1373

Die Bezeichnung etc. stimmen von der Art her mit meiner überein...glaube nicht das es daran liegt.

AnarchX
2006-07-24, 19:04:44
Grobiii[/POST]']Ich glaube nicht das "Conrad" mich übers Ohr haut. Und desweiteren gibt es keine x1300 Karte von Gecube mit SilentPipe.

Was sagt eigentlich der Treiber?

Vielleicht ein Fehler bei der Verpackung, aber es wird wohl definitiv eine X1300 sein.
Also umtauschen...

Grobiii
2006-07-24, 19:14:47
ja wie gesagt, das ATI Control Center sagt auch 1300....aber ich wiederhole mich noch mal, es gibt keine 1300 von Gecube mit Silent Pipe, daher kann eine "nur" falsche Verpackung auch nicht stimmen, und wie ich auch schon sagte, die ProduktNr. sagt auch 1600xxxx nicht 1300xxxx.

Möchte halt nicht die Karte wieder zurück schicken, 8 Wochen warten...um mir sagen zu lassen das die Karte doch ok ist.

Weiss einer welche Nr. auf der Verpackung Serial Nr. bzw. Produkt Nr. ist?

AnarchX
2006-07-24, 19:15:57
Mach halt ein paar Benches, dann siehst du ob sie das leistet wofür du bezahlt hast... ;)

Grobiii
2006-08-02, 08:46:46
also ich habe die Karte inzwischen mal in nem anderen Rechner eingebaut, und siehe da, dieser erkennt sie als 1600er. Also liegts wohl an der Barebone. Evtl. Board Bios flash oder so hm?

deekey777
2006-08-03, 17:50:59
http://www.driverheaven.net/showpost.php?p=943818&postcount=44

There is a serious bug that some cards are getting recognised wrong in these set also
---------------------------------------------
Catalyst 6.7 recognises graphics card model incorrectly
Posted by overclocker at 12:26

Due to a INF string in the Catalyst 6.6, some models of X1600XT might be recognised as a X1300 graphics card. We just tested the Catalyst 6.7 and it seems that the bug is still there. Looks like ATi driver got to check its drivers.

Do let us know if you are facing similar issues.
--------------------------------------------
Here is the report
http://www.ocworkbench.com/ocwbcgi/newspro/viewnews.cgi?newsid1154175996,60460,


With regard to the 1300 / 1600 mix up you are correct. This is the fault of the naming string in the INF. The problem affects Gigabyte and TUL products if I recall. I was made aware of this problem last week but it was too late to fix the Catalyst 6.7 build of drivers. They were already in the WHQL queue. A duplicate set of drivers with the proper names was sent off late Friday and we hope to be able to replace the current ones in a week or so. The impropper names should not affect operation of the driver. But it certainly confuses the heck out of people. BTW, this is not a driver bug, rather a stupid typo.:)

Es wird nüschts geflasht! Es ist alles in Ordnung mit der Karte (GeCube und Gigabyte sind verwandt irgendwie).