PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Gutes, kompatibles OCing-Board für AM2 gesucht.


Madkiller
2006-08-09, 17:49:18
Hallo.

Werden demnächst auf AM2 (auf-/)Umrüsten.
Wichtig ist natürlich, daß das Board möglichst problemlos ist, und möglichst umfassende OCing-Möglichkeiten hat.
Was ist da denn zur Zeit das Beste? :)
Reinkommen soll ein X2 3800+. Ein möglichst hoher stabiler Systemtakt wäre natürlich auch von Vorteil.

Ach ja.
Wegen Testzwecken sollte das Board auch SLI fähig sein.
[Nur optional, kein must-have]
Oder gibt es auch Möglichkeiten, daß CF und SLI möglich sind?
Ich habe z.B. gehört, daß es gehackte Treiber gibt, die SLI ermöglichen. Wenn ich mir also ein CF fähiges Mainbaord holen würde, und den Treiber nutze, ginge doch auch SLI, oder wie schauts aus?
[/Nur optional, kein must-have]

Als RAM hatte ich mal den DDR2 800er von MDT ins Auge gefasst:
http://www.geizhals.at/deutschland/a200561.html
Oder gibts nen kompatibleren bzw einen mit besserem Preis-Leistungs-Verhältniss?

kthx

AnarchX
2006-08-09, 18:24:59
Vielleicht das MSI K9A Platinum, XPress 3200 (dual PC2-6400U DDR2) (MS-7280-010):
http://www.geizhals.at/deutschland/a202364.html

MSI gives potential overclockers plenty of tools to use in conjunction with the motherboard's AMI BIOS. Overclockers have full control of the processor's multiplier (on FX models only, Athlon64 and Athlon64 FX models can control the multiplier downwards), and can adjust processor vCore from 1.2V to 1.4V, actually fairly tame in today's market of overclocker-targeted platforms. Full control over the system's DDR2 memory is provided too, with full support for timing tweaks on every setting to voltage support from 1.8V to 2.3V. MSI also provides you with the ability to push the voltage of the ATI RD580 Northbridge (1.8V to 2.15V) and HyperTransport link speed and voltage levels.
http://www.hothardware.com/viewarticle.aspx
Wobei aber die 1.4V bei einem schlechteren X2 3800+ schon zu wenig sein könnten.

Das klingt dann auch nicht so positiv:
Our overclocking results were somewhat varied. With the MSI K9A Platinum, we were able to crank up our FSB speed from 200 MHz to 260 MHz and keep system reliability perfectly solid. Moving past this, however, was completely useless, no matter how much cooling or voltage we applied.

Mit "guten" OC-Boards sieht es bei AM2 irgendwie schlecht aus, die werden wohl alle einen nForce haben...

z.B. ABIT KN9 SLI, nForce 570 SLI (dual PC2-6400U DDR2):
http://www.geizhals.at/deutschland/a199319.html

HyperTransport link can be set from 200 MHz-450 MHz in 1 MHz increments. The PCI-Express clock can be set from 100 MHz to 145 MHz in 1 MHz increments. The HT Multiplier can be set from 1x-5. DDR2 memory can be set from 400/533/667/800 MHz. The CPU voltage can be set up to +2.100V in 0.025v increments. Memory VDIMM can be set from 1.8-2.30V. Memory VTT can be set from -60/-30/+0/+30mV. The MCP voltage can be set from 1.20-1.40V in 0.05v increments. HyperTransport Voltage can likewise be set from 1.20V-1.40V in 0.05v increments.
http://www.motherboards.org/reviews/motherboards/1646_5.html

dasding
2006-08-10, 17:49:59
sind denn Board in diese Richtung (zum besseren ocen) geplant?

Madkiller
2006-08-10, 17:56:06
Ok, ich sehe schon.
Wenn, dann wird wohl nur SLI in Frage kommen.
Das Abit scheint schon mal nicht uninteressant zu sein.
Sonst noch Erfahrungen und/oder Empfehlungen mit SLI Boards? :)

Weiß bzgl RAM noch einer was?

dasding
2006-08-10, 18:02:25
mal vllt. ne dumme frage: wenn ich SLI garnicht nutzen will, dann kann ich trotzdem ne ati karte auf dem board betreiben?

Madkiller
2006-08-10, 18:07:18
Klar, abgesehen davon, daß du CF ( unter keinen Umständen - AFAIK) nicht nutzen kannst, funktioniert es ganz normal.

dasding
2006-08-10, 18:11:10
sonst gibt es keine gute ocing-fähige am2 bretter (vllt. mit CF)?

AnarchX
2006-08-10, 18:13:56
sonst gibt es keine gute ocing-fähige am2 bretter (vllt. mit CF)?

Die Liste der CF-Boards ist in der Tat sehr klein:
http://www.geizhals.at/eu/?cat=mbam2&sort=artikel&bpmax=&asuch=Crossfire&asd=on&filter=+Angebote+anzeigen+
:|

dasding
2006-08-10, 20:46:04
hat vllt. jmd. das ABIT KN9 SLI, nForce 570 SLI (dual PC2-6400U DDR2) und kann dazu was sagen?

StefanV
2006-08-10, 21:32:00
Die Liste der CF-Boards ist in der Tat sehr klein:
http://www.geizhals.at/eu/?cat=mbam2&sort=artikel&bpmax=&asuch=Crossfire&asd=on&filter=+Angebote+anzeigen+
:|
ASUS M2R32-MVP und Epox MD580 XF stehen in den Startlöchern...

dasding
2006-08-10, 21:45:34
wann kann man denn mit dem ASUS M2R32-MVP rechnen ?

ich brauch ja weder SLI, noch crossfire, sondern suche in gutes oc-fähige am2-brett.

AnarchX
2006-08-10, 21:47:50
ASUS M2R32-MVP und Epox MD580 XF stehen in den Startlöchern...

Sieht es bei diesen besser aus mit Ocing?

StefanV
2006-08-10, 22:28:55
wann kann man denn mit dem ASUS M2R32-MVP rechnen ?

ich brauch ja weder SLI, noch crossfire, sondern suche in gutes oc-fähige am2-brett.
Dürft zusammen mit dem EPox RD580 ankommen...

@AnarchX
Eigentlich schon...

dasding
2006-08-10, 22:29:48
ich meine, wann gibbet das teil zu kaufen ?

StefanV
2006-08-10, 22:32:00
2-4 Wochen wirds wohl noch dauern.

dasding
2006-08-10, 23:27:25
wie ist das Gigabyte GA-M55S-S3 ? zum ocen geeignet?