dopheus
2006-11-13, 11:23:06
Da ein Update ansteht, werde ich bald die Teile meines Servers verkaufen (alles bis auf Controllerkarten und HDDs).
Da ich mich schon länger nicht mehr damit beschäftigt habe, würde mich interessieren, was dabei noch etwa rausspringen könnte.
Zum Betrieb fehlt lediglich eine HDD. Graphik ist onboard (reicht für einen Server ja auch völlig aus).
Mainboard: Epox 5EGA+
Sockel: LGA775 400/533/800 MHz FSB Support
Chipset: Intel® i915G chipset (i915G + ICH6R) with Intel GMA900 Graphics
Memory: 4x 184-pin DDR SDRAM DIMM sockets, Supports up to 4 GB System Memory, Dual Channel Architecture
Expansion Slots: 1x PCI Express (x16) connector, 2x PCI Express (x1) connectors, 4x PCI connectors
USB: 8 USB connectors compliant with USB2.0 (4 connectors at rear panel)
S-ATA: 4 S-ATA ports with up to 150MBps bandwidth from ICH6r Supports RAID 0,1 / 0+1
Integrated Audio: Selectable 2, 6 or 8-CH audio from onboard Realtek ALC850 AC'97 version 2.3 compliant CODEC width 18-bit ADC and 16-bit DAC resolution
LAN: 1 GBit Ethernet from onboard Marvell 88E8001
http://www.hardwareluxx.de/Images/LGA775-3/09260005s.jpg
CPU: Intel Pentium 4 520
Prozessor Typ : Intel Pentium 4 520
Prozessorkern : Singlecore
Taktfrequenz pro Kern : 2800MHz
L2-Cache (insgesamt) : 1024KByte
Front Side Bus (FSB): 800MHz
Ram: 2x512mb Infineon 6A
PC2700, Winbond BH-6
liefen immer auf 200MHz bei 2,8V und Cl 2,0-2-2-5
Dazu kommt dann noch:
guter CPU-Kühler
älteres Gehäuse
300 Watt NT
altes aber funktionstüchtiges CD-Rom
altes aber funktionstüchtiges Floppy
HDD ist keine dabei, da diese auch im neuen Server laufen werden. Ich kann höchstens noch eine 5GB Platte mit Win XP zum Funktionstest dazu legen.
Da ich mich schon länger nicht mehr damit beschäftigt habe, würde mich interessieren, was dabei noch etwa rausspringen könnte.
Zum Betrieb fehlt lediglich eine HDD. Graphik ist onboard (reicht für einen Server ja auch völlig aus).
Mainboard: Epox 5EGA+
Sockel: LGA775 400/533/800 MHz FSB Support
Chipset: Intel® i915G chipset (i915G + ICH6R) with Intel GMA900 Graphics
Memory: 4x 184-pin DDR SDRAM DIMM sockets, Supports up to 4 GB System Memory, Dual Channel Architecture
Expansion Slots: 1x PCI Express (x16) connector, 2x PCI Express (x1) connectors, 4x PCI connectors
USB: 8 USB connectors compliant with USB2.0 (4 connectors at rear panel)
S-ATA: 4 S-ATA ports with up to 150MBps bandwidth from ICH6r Supports RAID 0,1 / 0+1
Integrated Audio: Selectable 2, 6 or 8-CH audio from onboard Realtek ALC850 AC'97 version 2.3 compliant CODEC width 18-bit ADC and 16-bit DAC resolution
LAN: 1 GBit Ethernet from onboard Marvell 88E8001
http://www.hardwareluxx.de/Images/LGA775-3/09260005s.jpg
CPU: Intel Pentium 4 520
Prozessor Typ : Intel Pentium 4 520
Prozessorkern : Singlecore
Taktfrequenz pro Kern : 2800MHz
L2-Cache (insgesamt) : 1024KByte
Front Side Bus (FSB): 800MHz
Ram: 2x512mb Infineon 6A
PC2700, Winbond BH-6
liefen immer auf 200MHz bei 2,8V und Cl 2,0-2-2-5
Dazu kommt dann noch:
guter CPU-Kühler
älteres Gehäuse
300 Watt NT
altes aber funktionstüchtiges CD-Rom
altes aber funktionstüchtiges Floppy
HDD ist keine dabei, da diese auch im neuen Server laufen werden. Ich kann höchstens noch eine 5GB Platte mit Win XP zum Funktionstest dazu legen.