BananaJoe
2006-12-09, 15:21:56
Hallo, gibts hier jemanden der schonmal erfolgreich nen Canon 6200 resettet hat?
Ich machs nach der Anleitung:
Waste Ink Counter Reset
1: Power off printer and covers closed
2: Hold down the Resume button then press and hold POWER, the Green Indicator will light.
3: While holding down POWER , release RESUME
4: Double click (2 clicks) RESUME then release BOTH POWER and RESUME and wait still the printer stops blinking.
5: When the indicator lights steady, press RESUME three(3) times. The indicator should be ORANGE.
6: Press Power to set data
Allerdings leuchte dann die Lampe wie in Punkt 5 beschrieben nicht steady, sondern blinkt weiter.. :rolleyes:
Ich machs nach der Anleitung:
Waste Ink Counter Reset
1: Power off printer and covers closed
2: Hold down the Resume button then press and hold POWER, the Green Indicator will light.
3: While holding down POWER , release RESUME
4: Double click (2 clicks) RESUME then release BOTH POWER and RESUME and wait still the printer stops blinking.
5: When the indicator lights steady, press RESUME three(3) times. The indicator should be ORANGE.
6: Press Power to set data
Allerdings leuchte dann die Lampe wie in Punkt 5 beschrieben nicht steady, sondern blinkt weiter.. :rolleyes: