LordDeath
2007-05-20, 00:39:32
hallo,
weil mein letzter brenner nicht mehr ging, habe ich mir einen neuen brenner von LG gekauft. und zwar den HL-DT-ST DVDRAM GSA-H42N.
beim brennen einer zusammenstellung bekomme ich immer an der selben stelle einen DMA-Treiber-Fehler und einen CRC error und der brennvorgang wird abgebrochen. selbst als ich die 16x tevion rohlinge mit 8x brennen wollte, ist das an der selbsen stelle passiert.
dann hab ich noch 8x intenso rohlinge probiert, und bei diesen passiert das auch.
bei anderen zusammenstellungen hab ich das selbe problem, nur passiert der fehler dort an einer anderen stelle! bei zusammenstellunge a ist es bei 35%, bei b immer 70% und c gibt schon bei 7% immer den geist auf.
von LG hab ich ein firmware update runtergeladen und es auch ausprobiert. leider brachte dies keine änderung.
die nero.exe konsumiert bei diesem fehler übrigens die cpu-leistung zu 100% (auf beiden cores), bis ich die fehlermeldung wegklicke.
als OS hab ich vista home premium 64bit drauf.
hier noch das log von nero:
1C82-0000-19E5-MAAX-4009-1375-****
Windows XP 6.0
AMD64
Wow64Process
WinAspi: -
NT-SPTI used
Nero Version: 7.8.5.0
Internal Version: 7, 8, 5, 0
Recorder: <HL-DT-ST DVDRAM GSA-H42N>Version: RL01 - HA 1 TA 3 - 7.8.5.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <FN3464B LNX135F >Version: 1.0 - HA 1 TA 1 - 7.8.5.0
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : FN3464B LNX135F 1.0 at4qyxa2 Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-H42N F: CDRom3
FN3464B LNX135F Z: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095808kB)
Free physical memory: 991MB (1014820kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.5.2007
UDF Zusammenstellung
00:17:54 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
00:17:54 #2 Text 0 File Isodoc.cpp, Line 6608
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
00:17:55 #3 Text 0 File Burncd.cpp, Line 3499
Turn on Disc-At-Once, using DVD media
00:17:55 #4 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2257535 (501:40.35, 4409MB)
00:17:55 #5 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD DVD)
00:17:55 #6 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: HL-DT-ST DVDRAM GSA-H42N, Media type: DVD-R
Disc Manufacturer: DAXON0 - 08S
Disc Application Code: 64, Disc Physical Code: 193
00:17:55 #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
00:17:55 #8 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2257536 (2257536) = #2257536/501:40.36
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2257536 blocks [F: HL-DT-ST DVDRAM GSA-H42N]
--------------------------------------------------------------
00:17:55 #9 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [F: HL-DT-ST DVDRAM GSA-H42N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4623433728, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2257536 | 0 | 0x00
2257536 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
00:17:55 #10 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
00:17:55 #11 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
00:17:55 #12 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
00:17:55 #13 Text 0 File Burncd.cpp, Line 4397
Cache writing successful.
00:17:55 #14 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
00:17:55 #15 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 8x (11.080 KB/s)
00:17:55 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
00:17:55 #17 Text 0 File DVDR.cpp, Line 3192
Recording mode: Sequential Recording Mode
00:17:55 #18 Text 0 File DVDR.cpp, Line 3348
Start write address at LBA 0
DVD high compatibility mode: Yes
00:17:55 #19 Text 0 File Cdrdrv.cpp, Line 9859
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00:17:55 #20 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
00:18:10 #21 Text 0 File Cdrdrv.cpp, Line 1338
00:18:10.896 - F: HL-DT-ST DVDRAM GSA-H42N : Queue again later
00:21:32 #22 SPTI -1502 File SCSIPassThrough.cpp, Line 179
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1502)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 00 00 0E AE 80 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 0C 08 03
Buffer x00000000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:21:32 #23 CDR -1502 File Writer.cpp, Line 303
DMA-driver error, CRC error
F: HL-DT-ST DVDRAM GSA-H42N
00:21:49 #24 Text 0 File DVDR.cpp, Line 3750
EndDAO: Last written address was 962175 (EAE7Fh)
00:21:50 #25 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 8x (11.080 KB/s)
00:21:50 #26 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
00:21:50 #27 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed
00:21:50 #28 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
habt ihr irgendwelche vorschläge, wie ich das problem lösen kann? oder ist der brenner im eimer und ich muss den zurück in den laden bringen?
ein offizielles firmwareupdate macht doch hoffentlich keine zicken mit der gewährleistungsfrist, oder?
weil mein letzter brenner nicht mehr ging, habe ich mir einen neuen brenner von LG gekauft. und zwar den HL-DT-ST DVDRAM GSA-H42N.
beim brennen einer zusammenstellung bekomme ich immer an der selben stelle einen DMA-Treiber-Fehler und einen CRC error und der brennvorgang wird abgebrochen. selbst als ich die 16x tevion rohlinge mit 8x brennen wollte, ist das an der selbsen stelle passiert.
dann hab ich noch 8x intenso rohlinge probiert, und bei diesen passiert das auch.
bei anderen zusammenstellungen hab ich das selbe problem, nur passiert der fehler dort an einer anderen stelle! bei zusammenstellunge a ist es bei 35%, bei b immer 70% und c gibt schon bei 7% immer den geist auf.
von LG hab ich ein firmware update runtergeladen und es auch ausprobiert. leider brachte dies keine änderung.
die nero.exe konsumiert bei diesem fehler übrigens die cpu-leistung zu 100% (auf beiden cores), bis ich die fehlermeldung wegklicke.
als OS hab ich vista home premium 64bit drauf.
hier noch das log von nero:
1C82-0000-19E5-MAAX-4009-1375-****
Windows XP 6.0
AMD64
Wow64Process
WinAspi: -
NT-SPTI used
Nero Version: 7.8.5.0
Internal Version: 7, 8, 5, 0
Recorder: <HL-DT-ST DVDRAM GSA-H42N>Version: RL01 - HA 1 TA 3 - 7.8.5.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <FN3464B LNX135F >Version: 1.0 - HA 1 TA 1 - 7.8.5.0
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : FN3464B LNX135F 1.0 at4qyxa2 Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-H42N F: CDRom3
FN3464B LNX135F Z: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095808kB)
Free physical memory: 991MB (1014820kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.5.2007
UDF Zusammenstellung
00:17:54 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
00:17:54 #2 Text 0 File Isodoc.cpp, Line 6608
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
00:17:55 #3 Text 0 File Burncd.cpp, Line 3499
Turn on Disc-At-Once, using DVD media
00:17:55 #4 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2257535 (501:40.35, 4409MB)
00:17:55 #5 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD DVD)
00:17:55 #6 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: HL-DT-ST DVDRAM GSA-H42N, Media type: DVD-R
Disc Manufacturer: DAXON0 - 08S
Disc Application Code: 64, Disc Physical Code: 193
00:17:55 #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
00:17:55 #8 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2257536 (2257536) = #2257536/501:40.36
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2257536 blocks [F: HL-DT-ST DVDRAM GSA-H42N]
--------------------------------------------------------------
00:17:55 #9 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [F: HL-DT-ST DVDRAM GSA-H42N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4623433728, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2257536 | 0 | 0x00
2257536 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
00:17:55 #10 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
00:17:55 #11 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
00:17:55 #12 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
00:17:55 #13 Text 0 File Burncd.cpp, Line 4397
Cache writing successful.
00:17:55 #14 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
00:17:55 #15 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 8x (11.080 KB/s)
00:17:55 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
00:17:55 #17 Text 0 File DVDR.cpp, Line 3192
Recording mode: Sequential Recording Mode
00:17:55 #18 Text 0 File DVDR.cpp, Line 3348
Start write address at LBA 0
DVD high compatibility mode: Yes
00:17:55 #19 Text 0 File Cdrdrv.cpp, Line 9859
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00:17:55 #20 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
00:18:10 #21 Text 0 File Cdrdrv.cpp, Line 1338
00:18:10.896 - F: HL-DT-ST DVDRAM GSA-H42N : Queue again later
00:21:32 #22 SPTI -1502 File SCSIPassThrough.cpp, Line 179
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1502)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 00 00 0E AE 80 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 0C 08 03
Buffer x00000000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00:21:32 #23 CDR -1502 File Writer.cpp, Line 303
DMA-driver error, CRC error
F: HL-DT-ST DVDRAM GSA-H42N
00:21:49 #24 Text 0 File DVDR.cpp, Line 3750
EndDAO: Last written address was 962175 (EAE7Fh)
00:21:50 #25 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 8x (11.080 KB/s)
00:21:50 #26 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
00:21:50 #27 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed
00:21:50 #28 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon
habt ihr irgendwelche vorschläge, wie ich das problem lösen kann? oder ist der brenner im eimer und ich muss den zurück in den laden bringen?
ein offizielles firmwareupdate macht doch hoffentlich keine zicken mit der gewährleistungsfrist, oder?