AnarchX
2007-12-20, 10:03:24
http://img520.imageshack.us/img520/5920/200712199ba1b7105f5ff51bq7.jpg (http://imageshack.us)
Releasenotes:
ATI Catalyst™ Release Note 1
Catalyst™ Software
Suite Version 7.12
Release Notes
This release note provides information on the latest posting of AMD’s industry
leading software suite, Catalyst™. This particular software suite updates both the
AMD Display Driver, and the Catalyst™ Control Center. This unified driver has
been further enhanced to provide the highest level of power, performance, and
reliability. The AMD Catalyst™ software suite is the ultimate in performance and
stability.
This release note provides information on the following:
• Web Content
• AMD Product Support
• Operating systems supported
• New Features
• Performance Improvements
• ATI’s Folding@Home
• Resolved Issues for the Windows Vista Operating System
• Resolved Issues for the Windows XP Operating System
• Resolved Issues for the Windows XP Professional x64 Edition
• Known Issues Under the Windows Vista Operating System
• Known Issues Under the Windows XP Operating System
• Known Issues Under the Windows XP Professional x64 Edition
• Installing the Catalyst™ Vista Software Driver
• AMD Customer Care
• Catalyst™ Crew Driver Feedback
ATI Catalyst™ Release Note 2
Web Content
The Catalyst™ software suite 7.12 contains the following:
• Radeon™ display driver 8.442
• Multimedia Center™ 9.16 (Windows XP only)
• HydraVision™ (Windows XP only)
• HydraVision™ Basic Edition (Windows XP only)
• Remote Wonder 3.04 (Windows XP only)
• WDM Driver Install Bundle
• Southbridge/IXP Driver
• Catalyst™ Control Center Version 7.12
AMD Product Support
The Catalyst™ Vista driver for both the 32bit and 64bit versions of the Microsoft
Windows Vista operating system is supported on the following ATI Radeon™
products.
Caution: The Catalyst™ software driver and the Catalyst™ Control
Center can be downloaded independently of each other. However, for
maximum stability and performance AMD recommends that both components
be updated from the same Catalyst™ release
Caution: The Catalyst™ Control Center requires that the Microsoft
.NET Framework version 2.0 be installed. Without .NET version 2.0
installed, the Catalyst™ Control Center will not launch properly and the
user will see an error message.
Note: These release notes provide information on the Radeon™ display
driver only. For information on the ATI Multimedia Center™,
HydraVision™, HydraVision Basic Edition, WDM, Remote Wonder™,
or the Southbridge/IXP driver, please refer to their respective release
notes found at: https://support.ati.com/
AMD Desktop Product Family Support for both Windows Vista and XP
ATI Radeon™ HD 3800 series ATI Radeon™ X850 series
ATI Radeon™ HD 2900 series ATI Radeon™ X800 series
ATI Radeon™ HD 2600 series ATI Radeon™ X700 series
ATI Radeon™ HD 2400 series ATI Radeon™ X600 series
ATI Radeon™ X1950 series ATI Radeon™ X550 series
ATI Radeon™ X1900 series ATI Radeon™ X300 series
ATI Catalyst™ Release Note 3
ATI Radeon™ X1800 series ATI Radeon™ 9800 series
ATI Radeon™ X1650 series ATI Radeon™ 9700 series
ATI Radeon™ X1600 series ATI Radeon™ 9600 series
ATI Radeon™ X1550 series ATI Radeon™ 9550 series
ATI Radeon™ X1300 series ATI Radeon™ 9500 series
ATI Radeon™ X1050 series
AMD Multimedia Family Product Support for both Windows Vista and XP
ATI All-in-Wonder™ X1900
Series
ATI All-in-Wonder™ X600
Series
ATI All-in-Wonder™ X1800
Series
ATI Theater™ 550 PRO
ATI All-in-Wonder™ 2006 Edition
ATI All-in-Wonder™ 9800
Series
ATI All-in-Wonder™ X800
Series
ATI All-in-Wonder™ 9600
Series
ATI Theater 650™
Note: ATI All-in-Wonder™ boards operate with AMD’s Windows
Vista ready display and capture drivers under the Windows Vista operating
system. However, the Windows Vista Media Center application does
not support TV/Capture functionality provided by the ATI All-in-Wonder
™. TV/Capture functionality is qualified to function with Snaptream’s
BeyondTV 4.6 for Windows Vista. Other third party solutions
(such as Arcsoft’s Total Media 3) may support TV/Capture with the ATI
All-in-Wonder™, but these applications have not been fully tested by
AMD.
AMD Chipset Product Support
ATI Radeon™ Xpress 1250 Series ATI Radeon™ Xpress 1150 Series
ATI Radeon™ X1250 Series ATI Radeon™ Xpress 1100 Series
ATI Radeon™ X1200 Series ATI Radeon™ Xpress 200 Series
AMD 580X Series Chipset AMD 690 Series Chipset
AMD Desktop Product Family Support for both Windows Vista and XP
ATI Catalyst™ Release Note 4
Operating systems supported
The latest version of the Catalyst™ software suite is designed to support the following
Microsoft Windows platforms:
• Windows Vista (32 and 64 bit versions)
• Windows XP Professional
• Windows XP Home Edition
• Windows XP Media Center Edition
• Windows XP Professional x64 Edition
New Features
Catalyst™ 7.12 introduces an Avivo™ update. The update allows the ATI Catalyst
™ Control Center to reflect what is supported by the driver taking into account
the graphics card installed in the system, and will not expose any video features
that is not supported by the driver. The DirectX Video Acceleration (DXVA)
driver will perform a profiling mechanism to query the graphics capability and the
Catalyst™ Control Center queries the caps via the interface defined between the
Catalyst™ Control Center and the DXVA components. This feature will be supported
on ATI Radeon™ 9500 series products and above.
Performance Improvements
The following performance improvements are noticed with Catalyst™ 7.12:
• 3DMark2005 performance improves 5% or more with largest gains noticed
when Anti-aliasing and Anisotropic Filtering are disabled on systems containing
either an ATI Radeon™ HD 2400 or ATI Radeon™ HD 2600 series of
products
• Company of Heroes DX10 performance improves up to 5% on systems containing
an ATI Radeon™ HD38x0 series of product
Note: When installing the Catalyst™ Vista driver for Windows Vista,
the user must logged on as an Administrator or have Administrator
rights in order to successfully complete the installation of the Catalyst™
Vista driver.
Caution: Once the driver installation is completed under the Vista
operating system (32 and 64 bit), the driver log file may report that the
ATI T200 Unified AVStream Driver failed to install. A reboot of the
operating system resolves the issue.
ATI Catalyst™ Release Note 5
ATI’s Folding@Home
Folding@Home is a distributed computing project designed by the Stanford University.
The application performs intensive simulations of protein folding. This
simulation will help researchers uncover how certain diseases develop. Folding@
Home uses distributed computing to simulate protein folding, the workload
is broken up into small work units and distributed across hundreds of thousands of
computers over the internet. You can help find the cure to many different diseases!
To join Folding@Home, follow these steps:
1 Download ATI’s Catalyst™ software suite
2 Download the Folding@Home GPU client application
3 Enter the ATI team number 51394 and start folding!
For more information on Folding@Home visit: http://ati.amd.com/technology/
streamcomputing/folding.html
Resolved Issues for the Windows Vista Operating
System
This section provides information on resolved issues in this release of the ATI
Catalyst™ Software Suite for Windows Vista. These include:
• Call of Duty: Enabling Super AA and CrossFire no longer results in the game
failing to respond when the player dies. Further details can be found in topic
number 737-31110
• Combat Mission: Shock Force Demo v1.02: Setting the ATI left-click compatibility
option to off and starting a new battle no longer results in the game
failing to respond when clicking the left mouse button on various options
within the game. Further details can be found in topic number 737-30492
• Crysis: Momentary corruption is no longer noticed when playing the game.
Further details can be found in topic number 737-31094
• Crysis: The ice level is no longer too bright which was making the game nonplayable.
Further details can be found in topic number 737-31104
• Dark Messiah, Might and Magic, or Sin Episodes: Too much fog or incorrect
fog no longer occurs during game play. This issue was known to occur on
systems containing an ATI Radeon™ HD 2x00 series of product. Further
details can be found in topic number 737-31101
• El Matador: Shadow corruption is no longer noticed throughout the game.
Further details can be found in topic number 737-31099
Note: If you have an ATI Radeon™ X1600, X1800, or X1900 series
of product, download the GPU client (either console or GUI version) not
to be confused with the CPU “Graphical client”.
If you do not have an ATI Radeon™ product listed above, then download
the CPU client.
ATI Catalyst™ Release Note 6
• Enemy Territory: Quake Wars: Enabling Super AA and soft particles no
longer results in corruption being noticed in the main menu and through-out
game play. Further details can be found in topic number 737-29942
• FEAR: The slow motion visual effects is now functioning. Further details can
be found in topic number 737-31100
• FlightSim X: Playing the game on a system running Windows Vista and containing
an ATI Radeon™ HD 2900 series of product no longer results in the
shadows being incorrect or failing to appear. Further details can be found in
topic number 737-31095
• Google Sketchup no longer fails to pan when AA is enabled on systems containing
an ATI Radeon™ X1300/1550/1600 series of product. Further details
can be found in topic number 737-30496
• GTA San Andreas: Enabling AA within the game and within the Catalyst™
Control Center no longer results in the game failing to start. Further details
can be found in topic number 737-31108
• GTA: San Andreas: Enabling high quality settings within the game no longer
results in Vsync loss, no video, or artifact corruption. Further details can be
found in topic number 737-31102
• Hellgate: MSAA is now working with the DX10 version of the game. Further
details can be found in topic number 737-31105
• Hellgate: Screen flashing or the game failing no longer occurs when attempting
to start a multiplayer game on a system running Windows Vista and containing
an ATI Radeon™ HD 2600 series of product. Further details can be
found in topic number 737-31106
• Infernal: the game no longer fails when attempting to launch a new game.
Further details can be found in topic number 737-31096
• Lord of the Rings Return of the King: The game background no longer
flashes when CrossFire is enabled. Further details can be found in topic number
737-31098
• Lost Planet: Setting the in-game options to maximum along with AA ste to
2x and AF set to 16x no longer results in corruption being noticed when
CrossFiore is enabled. Further details can be found in topic number
737-31090
• Quake 4: Enabling CrossFire and setting the in game options to 1600x1200
and AA to 4x no longer results in corruption being noticed. Further details can
be found in topic number 737-31109
• The Sims 2: Flickering and corruption are no longer noticed in certain areas
of the game. Further details can be found in topic number 737-31097
• World in Conflict: Setting the in-game AA option to 4x and running the
benchmark no longer results in flickering being noticed. Further details can be
found in topic number 737-31107
• When running certain OpenGL samples, the ATI Radeon™ graphics adapter
now runs at the requested clock values on a CrossFire™ configured system.
Further details can be found in topic number 737-28824
ATI Catalyst™ Release Note 7
• Catalyst™ Control Center: German character are no longer truncated in the
ProfileManager Applications tab. Further details can be found in topic number
737-29930
• Connecting a secondary display device to a system containing an ATI
Radeon™ x1200/1250/1270 series of product and enabling clone mode or
extended desktop mode no longer results in horizontal line corruption being
noticed when using a high refresh rate and display resolution. Further details
can be found in topic number 737-29933
• Connecting a secondary display device no longer results in the Anisotropic
Filtering option being missing for second adapter until the system is rebooted.
Further details can be found in topic number 737-30568
• Connecting a secondary display device to a system containing an ATI
Radeon™ x1200/1250/1270 series of product and enabling clone mode or
extended desktop mode no longer results in horizontal line corruption being
noticed when using a high refresh rate and display resolution. Further details
can be found in topic number 737-30572
• TV corruption is no longer noticed when using an ATI Radeon™ Xpress 1250
series of product. Further details can be found in topic number 737-30577
• Cyberlink: Playing an h.264 disk no longer results in corruption being noticed
on the lower portion of the playback window. Further details can be found in
topic number 737-30581
• Playing an HD-DVD title using the Cyberlink player no longer results in corruption
or the Windows Vista operating system failing to respond after a short
period of playback time. Further details can be found in topic number
737-30585
• Enabling extended desktop mode and dragging the media player window
between the desktops no longer results in the playback stopping. Further
details can be found in topic number 737-30586
• Setting the frame buffer size to 256mb in the CMOS setup no longer results in
the ATI graphics driver failing to be installed. Further details can be found in
topic number 737-31089
• The display no longer become white when resuming from an S4 state. Further
details can be found in topic number 737-31091
• The display no longer becomes white for several seconds before entering
hibernation mode. Further details can be found in topic number 737-31092
• Setting the display device to 1600x1200 75Hz no longer results in the HD
DVD playback window appearing blank. Further details can be found in topic
number 737-29936
• TV corruption is no longer noticed when using an ATI Radeon™ Xpress 1250
series of product. Further details can be found in topic number 737-30577
• A black screen is no longer displayed at the DVD menu when using
WinDVD8 to play a DVD title with DXVA enabled. Further details can be
found in topic number 737-30488
• Rotating the display device when playing a DVD using the WinDVD player
no longer results in the display going blank. Further details can be found in
topic number 737-31093
ATI Catalyst™ Release Note 8
• Connecting a display device via Component Video as the primary display
device and a DFP as a secondary display device no longer results in extended
desktop mode failing to be applied. Further details can be found in topic number
737-30494
• Cyberlink: Playing an h.264 disk no longer results in corruption being noticed
on the lower portion of the playback window. Further details can be found in
topic number 737-30581
• Disabling CrossFire no longer results in a secondary display device being out
of range on the secondary ASIC. Further details can be found in topic number
737-31103
• Installing two Radeon™ HD 2400 series of products into one system no
longer results in the AA filter box failing to become greyed out when enabling
CrossFire and setting AA to 8x. Further details can be found in topic number
737-31111
• Playing an HD-DVD title using the Cyberlink player no longer results in corruption
or the Windows Vista operating system failing to respond after a short
period of playback time. Further details can be found in topic number
737-30585
• Setting the display resolution to either 1776x1024 or 1920x1024 30i no
longer results in the display devices failing to resume from an S3 state. Further
details can be found in topic number 737-29944
• The Cyberlink player no longer fails after playing interlaced VC1 video for a
short period of time. Further details can be found in topic number 737-31112
• Dithering is no longer noticed with MPEG2 playback. Further details can be
found in topic number 737-31113
• Enabling extended desktop mode and dragging the media player window
between the desktops no longer results in the playback stopping. Further
details can be found in topic number 737-30586
Resolved Issues for the Windows XP Operating System
This section provides information on resolved issues in this release of the ATI
Catalyst™ Software Suite for Windows XP. These include:
• Call of Juarez: Enabling Super AA and CrossFire™ no longer results in corruption
being noticed when playing the game. Further details can be found in
topic number 737-30592
• DIRT: Launching DIRT with CrossFire enabled no longer results in the application
failing to launch and an error message being displayed. Further details
can be found in topic number 737-29554
• Enemy Territory Quake Wars: Flickering is no longer noticed when
SuperAA is enabled. Further details can be found in topic number 737-31136
• Enemy Territory Quake Wars: Setting the in-game options to 2560x1600
and soft particles, along with AA to 8x in the Catalyst™ Control Center no
longer results in corruption being noticed. Further details can be found in
topic number 737-31135
ATI Catalyst™ Release Note 9
• Globe 2.1: Corruption is no longer noticed during the introduction video
when CrossFire is enabled. Further details can be found in topic number
737-31140
• Loki demo: Launching the demo no longer results in the introduction movie
failing to display. Further details can be found in topic number 737-31117
• STALKER: Flickering is no longer noticed when playing the game with AA
set to 4x and full dynamic lighting is enabled. Further details can be found in
topic number 737-30593
• STALKER: The operating system no longer fails when attempting to play the
game with CrossFire enabled and all in-game options set to maximum. Further
details can be found in topic number 737-31131
• HD Audio is now working when setting the desktop resolution to
640x480@60Hz under the Windows XP operating system. Further details can
be found in topic number 737-30588
• Enabling CrossFire™ and entering hibernation mode no longer results in the
Windows XP operating system failing when attempting to resume from hibernation
mode. Further details can be found in topic number 737-30590
• Hot un-plugging the DFP display device when clone mode is enable no longer
results in the DFP display device still appearing in the Catalyst™ Control
Center. Further details can be found in topic number 737-31114
• HD-DVD content is no longer blocked over native HDMI when using the
cyberlink player. Further details can be found in topic number 737-30596
• Connecting an HDMI display device as the secondary display no longer
results in extended desktop mode failing when attempting to apply it. Further
details can be found in topic number 737-30589
• Entering hibernation mode under Windows XP no longer results in the operating
system hanging when attempting to resume from hibernation mode. Further
details can be found in topic number 737-31115
• CrossFire no longer fails to become disabled when hot unplugging the display
device from the interlink dongle. Further details can be found in topic number
737-31116
• Connecting a Dell 30" LDC display device to an ATI Radeon™ HD 2600
series of product no longer results in flashing or no display image. Further
details can be found in topic number 737-30545
• The 2D and 3D gamma no longer appears different when using the gamma
calibration tool. Further details can be found in topic number 737-29945
• Playing the online game TianLongBaBu for an extended period of time (2
hours or more) on a system containing an ATI Radeon™ HD2400 or HD2600
no longer results in the operating system failing to respond. Further details
can be found in topic number 737-30542
• Rotating the display device and running a directX9 sample in full-screen
mode no longer results in corruption being noticed. Further details can be
found in topic number 737-31118
• Disabling CrossFire no longer results in the Windows XP operating system
rebooting. Further details can be found in topic number 737-31132
ATI Catalyst™ Release Note 10
• Connecting a single display device to a secondary graphics adapter no longer
results in extended desktop mode being applied. Further details can be found
in topic number 737-30538
• Disconnecting display device no longer results in the ability to enable the
dis-connected display device within the Catalyst™ Control Center in a Cross-
Fire configured system. Further details can be found in topic number
737-31133
• Connecting a TV as the primary display device and setting the signal format
to any PAL mode no longer results in corruption being noticed on the secondary
display device when playing a media file using WinAmp or WinDVD.
Further details can be found in topic number 737-31134
• The Enable ATI Overdrive clocks for 3D applications only checkbox is now
checked and grayed out when the OverDrive option in the Catalyst™ Control
Center is unlocked. Further details can be found in topic number 737-30600
• Corruption is no longer noticed when enabling Theater mode and enabling
clone mode. Further details can be found in topic number 737-30546
• Dragging the WinDVD player from the primary display to the secondary display
no longer results in the player failing to respond. Further, closing the
WinDVD player using the Task Manager may result in the operating system
failing to respond. Further details can be found in topic number 737-29955
• With some h.264 titles that have MPEG2 intros, playback no longer switches
from hardware accelerated to software once the introductory content is finished.
Further details can be found in topic number 737-28517
• On certain products, dragging player window from primary to secondary display
no longer results in hardware acceleration being disabled which resulted
in the CPU usage increasing. Further details can be found in topic number
737-28516
• DXVA is now in use when play H264/VC1 HD content on systems containing
an ATI Radeon™ HD 2600 series of product. Further details can be found in
topic number 737-31137
• Enabling tiling on the secondary display device when Overlay Theater Mode
is enable no longer result in corruption being noticed. Further details can be
found in topic number 737-31138
• Corruption is no longer noticed on the secondary display device when Overlay
Theater Mode is enabled. Further details can be found in topic number
737-31139
• Enabling clone mode no longer results in corruption being noticed on both
display devices when Overlay Theater mode is enabled and the 3D screen
saver becomes active. Further details can be found in topic number 737-31141
Resolved Issues for the Windows XP Professional x64
Edition
This section provides information on resolved issues in this release of the ATI
Catalyst™ Software Suite for Windows XP Professional x64 Edition operating
system. These include
ATI Catalyst™ Release Note 11
• Prey: Corruption is no longer noticed when a player's face is two toned. Further
details can be found in topic number 737-31142
• Catalyst™ Control Center->OverDrive: The Windows XP Professional x64
Edition operating system no longer fails to resume from sleep mode when the
ATI OverDrive page is active. Further details can be found in topic number
737-31143
Known Issues Under the Windows Vista Operating
System
This section provides information on known issues associated with the ATI Catalyst
™. These include:
• City of Heroes: Attempting to play the game on a system with a dual link
panel connected to it may result in the Windows Vista operating system failing
to respond. Further details can be found in topic number 737-28495
• Half-Life 2: Episode 2: Playing the game on a system containing an ATI
Radeon™ HD 3800 series of product no longer results in the game failing to
the desktop when CrossFire is enabled. Further details can be found in topic
number 737-30753
• Lost Planet: Setting AA to either 4x or 8x may result in the game failing to
respond. Further details can be found in topic number 737-28492
• Oblivion: Flickering may be noticed when first making a move if the in-game
settings are set to maximum, CrossFire is enabled and AF is set to 16x. Further
details can be found in topic number 737-31152
• Oblivion: The game may fail or display corruption may be noticed when the
game is minimized to desktop and then restored. Further details can be found
in topic number 737-31151
• Unreal Tournament 3: The game may intermittently fail to launch when a
map has texture detail set to maximum. Further details can be found in topic
number 737-31189
• World In Conflict: The game may fail to the Windows desktop when the display
resolution is set to 1280x768 and AF is set to 16x. Further details can be
found in topic number 737-30752
• Resuming from an S3 state may result in a longer than expected time for the
Windows Vista operating system to resume. Further details can be found in
topic number 737-25798
• Catalyst™ Control Center->OverDrive™: The OverDrive™ setting are not
retained for individual accounts. Further details can be found in topic number
737-25805
• The Record function currently fails to work when using an ATI All-In-Wonder
™ X1300 and time shifting is enabled. Further information can be found in
topic number 737-22014
• A green or black screen may be displayed when configuring MCE to ATSC
mode. Further details can be found in topic number 737-27622
ATI Catalyst™ Release Note 12
• The 3D aspect may appear blank when launching a second instance of the
Catalyst™ Control Center™. This issue may also be experienced under the
Windows XP operating system. Further details can be found in topic number
737-28482
• The Catalyst™ Control Center version number may fail to be updated after
the installation of a newer Catalyst™ Control Center. Further details can be
found in topic number 737-28493
• Dragging player window to secondary display while playing back HD content
and moving it back to primary may result in blank player window. Further
details can be found in topic number 737-28496
• Connecting a secondary display device and enabling CrossFire™, followed
by disabling CrossFire™ no longer results in CrossFire™ pages in the Catalyst
™ Control Center showing that it is enabled. Further information on this
issue may be found in topic number 737-28845
• The Catalyst™ Control Center version number may fail to be updated after
the installation of a newer Catalyst™ Control Center. Further details can be
found in topic number 737-28493
• Performing an express install of the Catalyst™ Control Center may result in
an error message being displayed when rebooting the system. Further details
can be found in topic number 737-29532
• A black window may be displayed when attempting to play a DVD title using
WinDVD 7 when Overlay Theater Mode and clone mode is enabled. Further
details can be found in topic number 737-29539
• Enabling extended desktop mode and setting the display resolution to
1280x800 or higher, followed by playing an HD-DVD using PowerDVD,
may results in the HD-DVD title failing to play. Further details can be found
in topic number 737-29547
• Creating a secondary user account and switching from the secondary user
account to the primary user account may result in CrossFire™ failing to be
enabled. Further details can be found in topic number 737-28786
• The color depth may change to 8 bpp when enabling or disabling CrossFire™
for the first time. Further details can be found in topic number 737-29940
• The Catalyst™ Control Center version number may fail to be updated after
the installation of a newer Catalyst™ Control Center. Further details can be
found in topic number 737-28493
• Frame flipping may occur while playing certain VC-1 content titles. Further
details can be found in topic number 737-27804
• Rebooting the operating system after changing the skin to any available
option other than system skin may result in the Catalyst™ Control Center
menu options no longer being visible. Further details can be found in topic
number 737-30569
• The Catalyst™ Control Center menu option may fail to function when changing
the skin from system skin to any other available skin. Further details can
be found in topic number 737-30570
ATI Catalyst™ Release Note 13
• Installing the WDM driver on systems containing an ATI TV Tuner product
and an ATI graphics adapter may result in the WDM driver failing to install.
Further details can be found in topic number 737-30571
• Connecting a secondary display device using the HDMI connector and
enabling either clone mode or extended desktop mode may result in the
WinDVD 7 player playing in a windowed mode on both display devices when
Overlay Theater Mode is enabled. Further details can be found in topic number
737-30579
• The color depth may change to 8 bpp when enabling or disabling CrossFire™
for the first time. Further details can be found in topic number 737-30583
• The Windows Vista operating system may fail to respond when running the
Auto-tune utility found in the Catalyst™ Control Center OverDrive™ option.
Further details can be found in topic number 737-30584
• Connecting a secondary display device to a system containing an ATI
Radeon™ x1200/1250/1270 series of product and enabling clone mode or
extended desktop mode may result in horizontal line corruption being noticed
when using a high refresh rate and display resolution. Further details can be
found in topic number 737-31144
• Using the hot-key function to switch between various display scenarios may
result in the HDMI display device displaying a blank screen. Further details
can be found in topic number 737-31145
• The secondary HDMI Display may turn off when resuming from an S1 hibernation
with an HDMI display connected. Further details can be found in topic
number 737-31146
• Connecting a secondary display device using the HDMI connector and
enabling either clone mode or extended desktop mode may result in the
WinDVD 7 player playing in a windowed mode on both display devices when
Overlay Theater Mode is enabled. Further details can be found in topic number
737-30579
• Resuming from hibernation mode with HDMI display connected may result
in a black screen with only a mouse cursor being displayed. Further details
can be found in topic number 737-31149
• Setting the desktop resolution to 1600x1200 or greater may result in green
pixel corruption being noticed when playing certain games. This issue maybe
noticed when using a system running Windows Vista and containing an ATI
Radeon™ HD 2600 or HD 2400 series of product. Further details can be
found in topic number 737-31150
• The color depth may change to 8 bpp when enabling or disabling CrossFire
for the first time. Further details can be found in topic number 737-30583
• Enabling extended desktop mode and setting the display resolution to
1280x800 or higher, followed by playing an HD-DVD using PowerDVD,
may results in the HD-DVD title failing to play. Further details can be found
in topic number 737-29547
• Dragging the player window to a secondary display while playing back HD
content and moving it back to primary may result in blank player window.
Further details can be found in topic number 737-28496
ATI Catalyst™ Release Note 14
• Frame flipping may occur while playing certain VC-1 content titles. Further
details can be found in topic number 737-27804
• Attempting to play the HD-DVD title Harsh Times, School for Scoundrels
using the Cyberlink player may result in block corruption being noticed. Further
details can be found in topic number 737-31155
• Connecting a secondary display device and enabling clone mode may result in
the inability of changing the display configuration when resuming from an S4
state. Further details can be found in topic number 737-31157
• The OverDrive page may be grayed out and the GPU and memory clocks as
may be displayed as 000 after enabling CrossFire on systems containing and
ATI Radeon™ X1900 CrossFire Edition and running Windows Vista (64 bit
version). Further details can be found in topic number 737-31161
• Enabling CrossFire on a system containing an ATI Radeon™ X1900 Cross-
Fire Edition product may result in the Windows Vista (64 bit version) failing.
Further details can be found in topic number 737-31163
• Connecting an HDMI display device as the primary and setting the display
resolution to 1280x1024 may result in an error message when attempting to
personalize the display settings. Further details can be found in topic number
737-31165
Known Issues Under the Windows XP Operating
System
The following section provides a summary of open issues in the latest version of
Catalyst™. These include:
• Call of Juarez: Setting the game level with Optimal Quality and high
in-game settings may result in the game level being blank. Further details can
be found in topic number 737-30591
• City of Heroes: A fatal error message may be displayed when exiting the
game and attempting to launch the Catalyst™ Control Center™ in Advanced
mode. Further details can be found in topic number 737-28514
• Enemy Territory: Quake Wars may have corruption on the water and sky
after increasing the game resolution. Restarting the game at that higher resolution
or issuing reloadImages command in the game console corrects the corruption.
This issue only impacts graphics cards up to the ATI Radeon™ X850.
Further details can be found in topic number 737-29947
• Lost Planet: Setting AA to either 4x or 8x may intermittently result in the
game failing to respond. Further details can be found in topic number
737-28492
• Star Wars Battlefront 2: Setting the in-game options as follows: Overall
Quality to High, View Distance to 99, LOD Distance to 99 and Anti-Aliasing
to 6x may result in the game's loading bar reaching the end but the game failing
to start. Further details can be found in topic number 737-29946
• Enabling CrossFire™ may result in display corruption being noticed when
playing a DVD or media clip using either WinDVD 7, Windows Media Player
or PowerDVD 6. Further details can be found in topic number 737-22806
ATI Catalyst™ Release Note 15
• Catalyst™ Control Center->OverDrive™: The OverDrive™ setting are not
retained for individual accounts. This issue may also be experienced under the
Windows Vista operating system. Further details can be found in topic number
737-25805
• Connecting two display devices to an ATI Radeon™ X1600 series product
may result in the device manager failing to detect the secondary display
device. Further information may be found in topic number 737-21266
• Installing the HDMI audio driver and the VIA audio chipset driver may
results in a compatibility issue being noticed and a yellow exclamation mark
showing up in the Sound, Video and Game Controllers. Further details can be
found in topic number 737-28833
• Installing the Catalyst™ Control Center on a previously installed version may
results in a warning message that the setup is installing over an earlier version,
and that the previous version needs to be uninstalled before installing a more
current version, resulting in the Catalyst™ Control Center failing to be
installed. Further details can be found in topic number 737-28513
• Performing a fast user switch when running overfly.exe in Overlay Theater
Mode may result in overfly.exe failing when switching back. Further details
can be found in topic number 737-29951
• Catalyst™ Control Center: Configuring a system with multi-adapters may
result in an error message being displayed when running the Test Custom
Clocks. Further details can be found in topic number 737-29953
• Connecting a CRT display device as the secondary display and playing a
Blu-ray DVD using a Cyberlink player may result in no video playback if
extended desktop mode is enabled. Further details can be found in topic number
737-30587
• Connecting a Dual Link Panel to the on-board DVI port, followed by hot
plugging a DVI display to the add-on DVI card may result in clone mode
becoming disabled when rebooting the machine and the secondary display
device remaining blank. Further details can be found in topic number
737-31166
• The movement of pictures may not appear smooth under Excel (Office2007)
when the color depth is set to 16bpp. Further details can be found in topic
number 737-31167
• The Catalyst Control Center menu option may fail to function when changing
the skin from system skin to any other available skin. Further details can be
found in topic number 737-30570
• The 3D aspect may appear blank when launching a second instance of the
Catalyst™ Control Center. Further details can be found in topic number
737-28482
• Performing an express install of the Catalyst™ Control Center may result in
an error message being displayed when rebooting the system. Further details
can be found in topic number 737-29532
• The AVIVO TV controls are not available under the Windows Media Center
Edition operating system. Further details can be found in topic number
737-31170
ATI Catalyst™ Release Note 16
• Setting the display resolution to 1440x900 or lower may result in corruption
being noticed when playing a DVD title. Further details can be found in topic
number 737-31168
• The scaling function may fail under certain resolutions in the Catalyst™ Control
Center. Further details can be found in topic number 737-31169
• Setting the desktop resolution to 1280x1024 and using PowerDVD to play an
HD-DVD or Blu-ray title may result in corruption being noticed when using
an ATI Radeon™ HD 2400 series of product. Further details can be found in
topic number 737-31171
• On certain products, changing display resolution while playing back High
Definition content may results in instability. It is recommended to set appropriate
resolution while playback is stopped. Further details can be found in
topic number 737-31172
• Cyberlink: Playing a DVD title on a system containing an ATI Radeon™ HD
2400 series may result in corruption being noticed. Further details can be
found in topic number 737-31173
• Connecting a CRT display device as the secondary display and playing a
Blu-ray DVD using a Cyberlink player may result in no video playback if
extended desktop mode is enabled. Further details can be found in topic number
737-30587
• The floppy drive may fail to read or write under Vista on Dell XPS410 system.
Further details can be found in topic number 737-31148
Known Issues Under the Windows XP Professional x64
Edition
The following section provides a summary of open issues in the latest version of
Catalyst™. These include:
• FAR CRY: Playing the game on a system running either the Windows XP
Professional x64 Edition or Windows XP operating system may result in corruption
being noticed when using an ATI Radeon™ Xpress 1200 series of
products. Further information can be found in topic number 737-23452
• Running an OpenGL application and attempting to rotate the desktop may
result in corruption being noticed. Further details can be found in topic number
737-29556
• The Record function currently fails to work when using an ATI All-In-Wonder
™ X1300 and time shifting is enabled. Further information can be found in
topic number 737-22014
• Running an OpenGL application and attempting to rotate the desktop may
result in corruption being noticed. Further details can be found in topic number
737-29556
For further information and general help on software driver installation, game
issues, and more, visit ATI Customer Care.
ATI Catalyst™ Release Note 17
Installing the Catalyst™ Vista Software Driver
Installation information can be found at: ati.amd.com
AMD Customer Care
The AMD Customer Care website provides a high level of technical support and
ease of navigation. The AMD Customer Care website provides accurate and
up-to-date product support for optimum usability and performance. Technical
issues are categorized and personalized to enhance user experience. The AMD
Customer Care Website can be found at: support.ati.com
To view a known issue or find troubleshooting information, do the following:
1 Go to ati.amd.com. The AMD home page is displayed.
2 Click on Customer Care and select Radeon™ (PC/Mac). The ATI Customer
Care web page is displayed.
3 Select Knowledge base. The AMD knowledge base is displayed.
4 In the top right corner of the page, select Advanced Search. The Advanced
Search page is displayed.
5 Select the option you wish to search by.
6 Click SEARCH. The information requested (if available) is displayed.
Catalyst™ Crew Driver Feedback
This driver release incorporates suggestions received through the Catalyst™
CREW Driver Feedback program. To provide us with your feedback, visit: Catalyst
™ Crew Driver Feedback.
http://bbs.chiphell.com/viewthread.php?tid=13942&extra=page%3D1
Da dürfte der Treiber wohl nicht mehr lange auf sich warten lassen.
Releasenotes:
ATI Catalyst™ Release Note 1
Catalyst™ Software
Suite Version 7.12
Release Notes
This release note provides information on the latest posting of AMD’s industry
leading software suite, Catalyst™. This particular software suite updates both the
AMD Display Driver, and the Catalyst™ Control Center. This unified driver has
been further enhanced to provide the highest level of power, performance, and
reliability. The AMD Catalyst™ software suite is the ultimate in performance and
stability.
This release note provides information on the following:
• Web Content
• AMD Product Support
• Operating systems supported
• New Features
• Performance Improvements
• ATI’s Folding@Home
• Resolved Issues for the Windows Vista Operating System
• Resolved Issues for the Windows XP Operating System
• Resolved Issues for the Windows XP Professional x64 Edition
• Known Issues Under the Windows Vista Operating System
• Known Issues Under the Windows XP Operating System
• Known Issues Under the Windows XP Professional x64 Edition
• Installing the Catalyst™ Vista Software Driver
• AMD Customer Care
• Catalyst™ Crew Driver Feedback
ATI Catalyst™ Release Note 2
Web Content
The Catalyst™ software suite 7.12 contains the following:
• Radeon™ display driver 8.442
• Multimedia Center™ 9.16 (Windows XP only)
• HydraVision™ (Windows XP only)
• HydraVision™ Basic Edition (Windows XP only)
• Remote Wonder 3.04 (Windows XP only)
• WDM Driver Install Bundle
• Southbridge/IXP Driver
• Catalyst™ Control Center Version 7.12
AMD Product Support
The Catalyst™ Vista driver for both the 32bit and 64bit versions of the Microsoft
Windows Vista operating system is supported on the following ATI Radeon™
products.
Caution: The Catalyst™ software driver and the Catalyst™ Control
Center can be downloaded independently of each other. However, for
maximum stability and performance AMD recommends that both components
be updated from the same Catalyst™ release
Caution: The Catalyst™ Control Center requires that the Microsoft
.NET Framework version 2.0 be installed. Without .NET version 2.0
installed, the Catalyst™ Control Center will not launch properly and the
user will see an error message.
Note: These release notes provide information on the Radeon™ display
driver only. For information on the ATI Multimedia Center™,
HydraVision™, HydraVision Basic Edition, WDM, Remote Wonder™,
or the Southbridge/IXP driver, please refer to their respective release
notes found at: https://support.ati.com/
AMD Desktop Product Family Support for both Windows Vista and XP
ATI Radeon™ HD 3800 series ATI Radeon™ X850 series
ATI Radeon™ HD 2900 series ATI Radeon™ X800 series
ATI Radeon™ HD 2600 series ATI Radeon™ X700 series
ATI Radeon™ HD 2400 series ATI Radeon™ X600 series
ATI Radeon™ X1950 series ATI Radeon™ X550 series
ATI Radeon™ X1900 series ATI Radeon™ X300 series
ATI Catalyst™ Release Note 3
ATI Radeon™ X1800 series ATI Radeon™ 9800 series
ATI Radeon™ X1650 series ATI Radeon™ 9700 series
ATI Radeon™ X1600 series ATI Radeon™ 9600 series
ATI Radeon™ X1550 series ATI Radeon™ 9550 series
ATI Radeon™ X1300 series ATI Radeon™ 9500 series
ATI Radeon™ X1050 series
AMD Multimedia Family Product Support for both Windows Vista and XP
ATI All-in-Wonder™ X1900
Series
ATI All-in-Wonder™ X600
Series
ATI All-in-Wonder™ X1800
Series
ATI Theater™ 550 PRO
ATI All-in-Wonder™ 2006 Edition
ATI All-in-Wonder™ 9800
Series
ATI All-in-Wonder™ X800
Series
ATI All-in-Wonder™ 9600
Series
ATI Theater 650™
Note: ATI All-in-Wonder™ boards operate with AMD’s Windows
Vista ready display and capture drivers under the Windows Vista operating
system. However, the Windows Vista Media Center application does
not support TV/Capture functionality provided by the ATI All-in-Wonder
™. TV/Capture functionality is qualified to function with Snaptream’s
BeyondTV 4.6 for Windows Vista. Other third party solutions
(such as Arcsoft’s Total Media 3) may support TV/Capture with the ATI
All-in-Wonder™, but these applications have not been fully tested by
AMD.
AMD Chipset Product Support
ATI Radeon™ Xpress 1250 Series ATI Radeon™ Xpress 1150 Series
ATI Radeon™ X1250 Series ATI Radeon™ Xpress 1100 Series
ATI Radeon™ X1200 Series ATI Radeon™ Xpress 200 Series
AMD 580X Series Chipset AMD 690 Series Chipset
AMD Desktop Product Family Support for both Windows Vista and XP
ATI Catalyst™ Release Note 4
Operating systems supported
The latest version of the Catalyst™ software suite is designed to support the following
Microsoft Windows platforms:
• Windows Vista (32 and 64 bit versions)
• Windows XP Professional
• Windows XP Home Edition
• Windows XP Media Center Edition
• Windows XP Professional x64 Edition
New Features
Catalyst™ 7.12 introduces an Avivo™ update. The update allows the ATI Catalyst
™ Control Center to reflect what is supported by the driver taking into account
the graphics card installed in the system, and will not expose any video features
that is not supported by the driver. The DirectX Video Acceleration (DXVA)
driver will perform a profiling mechanism to query the graphics capability and the
Catalyst™ Control Center queries the caps via the interface defined between the
Catalyst™ Control Center and the DXVA components. This feature will be supported
on ATI Radeon™ 9500 series products and above.
Performance Improvements
The following performance improvements are noticed with Catalyst™ 7.12:
• 3DMark2005 performance improves 5% or more with largest gains noticed
when Anti-aliasing and Anisotropic Filtering are disabled on systems containing
either an ATI Radeon™ HD 2400 or ATI Radeon™ HD 2600 series of
products
• Company of Heroes DX10 performance improves up to 5% on systems containing
an ATI Radeon™ HD38x0 series of product
Note: When installing the Catalyst™ Vista driver for Windows Vista,
the user must logged on as an Administrator or have Administrator
rights in order to successfully complete the installation of the Catalyst™
Vista driver.
Caution: Once the driver installation is completed under the Vista
operating system (32 and 64 bit), the driver log file may report that the
ATI T200 Unified AVStream Driver failed to install. A reboot of the
operating system resolves the issue.
ATI Catalyst™ Release Note 5
ATI’s Folding@Home
Folding@Home is a distributed computing project designed by the Stanford University.
The application performs intensive simulations of protein folding. This
simulation will help researchers uncover how certain diseases develop. Folding@
Home uses distributed computing to simulate protein folding, the workload
is broken up into small work units and distributed across hundreds of thousands of
computers over the internet. You can help find the cure to many different diseases!
To join Folding@Home, follow these steps:
1 Download ATI’s Catalyst™ software suite
2 Download the Folding@Home GPU client application
3 Enter the ATI team number 51394 and start folding!
For more information on Folding@Home visit: http://ati.amd.com/technology/
streamcomputing/folding.html
Resolved Issues for the Windows Vista Operating
System
This section provides information on resolved issues in this release of the ATI
Catalyst™ Software Suite for Windows Vista. These include:
• Call of Duty: Enabling Super AA and CrossFire no longer results in the game
failing to respond when the player dies. Further details can be found in topic
number 737-31110
• Combat Mission: Shock Force Demo v1.02: Setting the ATI left-click compatibility
option to off and starting a new battle no longer results in the game
failing to respond when clicking the left mouse button on various options
within the game. Further details can be found in topic number 737-30492
• Crysis: Momentary corruption is no longer noticed when playing the game.
Further details can be found in topic number 737-31094
• Crysis: The ice level is no longer too bright which was making the game nonplayable.
Further details can be found in topic number 737-31104
• Dark Messiah, Might and Magic, or Sin Episodes: Too much fog or incorrect
fog no longer occurs during game play. This issue was known to occur on
systems containing an ATI Radeon™ HD 2x00 series of product. Further
details can be found in topic number 737-31101
• El Matador: Shadow corruption is no longer noticed throughout the game.
Further details can be found in topic number 737-31099
Note: If you have an ATI Radeon™ X1600, X1800, or X1900 series
of product, download the GPU client (either console or GUI version) not
to be confused with the CPU “Graphical client”.
If you do not have an ATI Radeon™ product listed above, then download
the CPU client.
ATI Catalyst™ Release Note 6
• Enemy Territory: Quake Wars: Enabling Super AA and soft particles no
longer results in corruption being noticed in the main menu and through-out
game play. Further details can be found in topic number 737-29942
• FEAR: The slow motion visual effects is now functioning. Further details can
be found in topic number 737-31100
• FlightSim X: Playing the game on a system running Windows Vista and containing
an ATI Radeon™ HD 2900 series of product no longer results in the
shadows being incorrect or failing to appear. Further details can be found in
topic number 737-31095
• Google Sketchup no longer fails to pan when AA is enabled on systems containing
an ATI Radeon™ X1300/1550/1600 series of product. Further details
can be found in topic number 737-30496
• GTA San Andreas: Enabling AA within the game and within the Catalyst™
Control Center no longer results in the game failing to start. Further details
can be found in topic number 737-31108
• GTA: San Andreas: Enabling high quality settings within the game no longer
results in Vsync loss, no video, or artifact corruption. Further details can be
found in topic number 737-31102
• Hellgate: MSAA is now working with the DX10 version of the game. Further
details can be found in topic number 737-31105
• Hellgate: Screen flashing or the game failing no longer occurs when attempting
to start a multiplayer game on a system running Windows Vista and containing
an ATI Radeon™ HD 2600 series of product. Further details can be
found in topic number 737-31106
• Infernal: the game no longer fails when attempting to launch a new game.
Further details can be found in topic number 737-31096
• Lord of the Rings Return of the King: The game background no longer
flashes when CrossFire is enabled. Further details can be found in topic number
737-31098
• Lost Planet: Setting the in-game options to maximum along with AA ste to
2x and AF set to 16x no longer results in corruption being noticed when
CrossFiore is enabled. Further details can be found in topic number
737-31090
• Quake 4: Enabling CrossFire and setting the in game options to 1600x1200
and AA to 4x no longer results in corruption being noticed. Further details can
be found in topic number 737-31109
• The Sims 2: Flickering and corruption are no longer noticed in certain areas
of the game. Further details can be found in topic number 737-31097
• World in Conflict: Setting the in-game AA option to 4x and running the
benchmark no longer results in flickering being noticed. Further details can be
found in topic number 737-31107
• When running certain OpenGL samples, the ATI Radeon™ graphics adapter
now runs at the requested clock values on a CrossFire™ configured system.
Further details can be found in topic number 737-28824
ATI Catalyst™ Release Note 7
• Catalyst™ Control Center: German character are no longer truncated in the
ProfileManager Applications tab. Further details can be found in topic number
737-29930
• Connecting a secondary display device to a system containing an ATI
Radeon™ x1200/1250/1270 series of product and enabling clone mode or
extended desktop mode no longer results in horizontal line corruption being
noticed when using a high refresh rate and display resolution. Further details
can be found in topic number 737-29933
• Connecting a secondary display device no longer results in the Anisotropic
Filtering option being missing for second adapter until the system is rebooted.
Further details can be found in topic number 737-30568
• Connecting a secondary display device to a system containing an ATI
Radeon™ x1200/1250/1270 series of product and enabling clone mode or
extended desktop mode no longer results in horizontal line corruption being
noticed when using a high refresh rate and display resolution. Further details
can be found in topic number 737-30572
• TV corruption is no longer noticed when using an ATI Radeon™ Xpress 1250
series of product. Further details can be found in topic number 737-30577
• Cyberlink: Playing an h.264 disk no longer results in corruption being noticed
on the lower portion of the playback window. Further details can be found in
topic number 737-30581
• Playing an HD-DVD title using the Cyberlink player no longer results in corruption
or the Windows Vista operating system failing to respond after a short
period of playback time. Further details can be found in topic number
737-30585
• Enabling extended desktop mode and dragging the media player window
between the desktops no longer results in the playback stopping. Further
details can be found in topic number 737-30586
• Setting the frame buffer size to 256mb in the CMOS setup no longer results in
the ATI graphics driver failing to be installed. Further details can be found in
topic number 737-31089
• The display no longer become white when resuming from an S4 state. Further
details can be found in topic number 737-31091
• The display no longer becomes white for several seconds before entering
hibernation mode. Further details can be found in topic number 737-31092
• Setting the display device to 1600x1200 75Hz no longer results in the HD
DVD playback window appearing blank. Further details can be found in topic
number 737-29936
• TV corruption is no longer noticed when using an ATI Radeon™ Xpress 1250
series of product. Further details can be found in topic number 737-30577
• A black screen is no longer displayed at the DVD menu when using
WinDVD8 to play a DVD title with DXVA enabled. Further details can be
found in topic number 737-30488
• Rotating the display device when playing a DVD using the WinDVD player
no longer results in the display going blank. Further details can be found in
topic number 737-31093
ATI Catalyst™ Release Note 8
• Connecting a display device via Component Video as the primary display
device and a DFP as a secondary display device no longer results in extended
desktop mode failing to be applied. Further details can be found in topic number
737-30494
• Cyberlink: Playing an h.264 disk no longer results in corruption being noticed
on the lower portion of the playback window. Further details can be found in
topic number 737-30581
• Disabling CrossFire no longer results in a secondary display device being out
of range on the secondary ASIC. Further details can be found in topic number
737-31103
• Installing two Radeon™ HD 2400 series of products into one system no
longer results in the AA filter box failing to become greyed out when enabling
CrossFire and setting AA to 8x. Further details can be found in topic number
737-31111
• Playing an HD-DVD title using the Cyberlink player no longer results in corruption
or the Windows Vista operating system failing to respond after a short
period of playback time. Further details can be found in topic number
737-30585
• Setting the display resolution to either 1776x1024 or 1920x1024 30i no
longer results in the display devices failing to resume from an S3 state. Further
details can be found in topic number 737-29944
• The Cyberlink player no longer fails after playing interlaced VC1 video for a
short period of time. Further details can be found in topic number 737-31112
• Dithering is no longer noticed with MPEG2 playback. Further details can be
found in topic number 737-31113
• Enabling extended desktop mode and dragging the media player window
between the desktops no longer results in the playback stopping. Further
details can be found in topic number 737-30586
Resolved Issues for the Windows XP Operating System
This section provides information on resolved issues in this release of the ATI
Catalyst™ Software Suite for Windows XP. These include:
• Call of Juarez: Enabling Super AA and CrossFire™ no longer results in corruption
being noticed when playing the game. Further details can be found in
topic number 737-30592
• DIRT: Launching DIRT with CrossFire enabled no longer results in the application
failing to launch and an error message being displayed. Further details
can be found in topic number 737-29554
• Enemy Territory Quake Wars: Flickering is no longer noticed when
SuperAA is enabled. Further details can be found in topic number 737-31136
• Enemy Territory Quake Wars: Setting the in-game options to 2560x1600
and soft particles, along with AA to 8x in the Catalyst™ Control Center no
longer results in corruption being noticed. Further details can be found in
topic number 737-31135
ATI Catalyst™ Release Note 9
• Globe 2.1: Corruption is no longer noticed during the introduction video
when CrossFire is enabled. Further details can be found in topic number
737-31140
• Loki demo: Launching the demo no longer results in the introduction movie
failing to display. Further details can be found in topic number 737-31117
• STALKER: Flickering is no longer noticed when playing the game with AA
set to 4x and full dynamic lighting is enabled. Further details can be found in
topic number 737-30593
• STALKER: The operating system no longer fails when attempting to play the
game with CrossFire enabled and all in-game options set to maximum. Further
details can be found in topic number 737-31131
• HD Audio is now working when setting the desktop resolution to
640x480@60Hz under the Windows XP operating system. Further details can
be found in topic number 737-30588
• Enabling CrossFire™ and entering hibernation mode no longer results in the
Windows XP operating system failing when attempting to resume from hibernation
mode. Further details can be found in topic number 737-30590
• Hot un-plugging the DFP display device when clone mode is enable no longer
results in the DFP display device still appearing in the Catalyst™ Control
Center. Further details can be found in topic number 737-31114
• HD-DVD content is no longer blocked over native HDMI when using the
cyberlink player. Further details can be found in topic number 737-30596
• Connecting an HDMI display device as the secondary display no longer
results in extended desktop mode failing when attempting to apply it. Further
details can be found in topic number 737-30589
• Entering hibernation mode under Windows XP no longer results in the operating
system hanging when attempting to resume from hibernation mode. Further
details can be found in topic number 737-31115
• CrossFire no longer fails to become disabled when hot unplugging the display
device from the interlink dongle. Further details can be found in topic number
737-31116
• Connecting a Dell 30" LDC display device to an ATI Radeon™ HD 2600
series of product no longer results in flashing or no display image. Further
details can be found in topic number 737-30545
• The 2D and 3D gamma no longer appears different when using the gamma
calibration tool. Further details can be found in topic number 737-29945
• Playing the online game TianLongBaBu for an extended period of time (2
hours or more) on a system containing an ATI Radeon™ HD2400 or HD2600
no longer results in the operating system failing to respond. Further details
can be found in topic number 737-30542
• Rotating the display device and running a directX9 sample in full-screen
mode no longer results in corruption being noticed. Further details can be
found in topic number 737-31118
• Disabling CrossFire no longer results in the Windows XP operating system
rebooting. Further details can be found in topic number 737-31132
ATI Catalyst™ Release Note 10
• Connecting a single display device to a secondary graphics adapter no longer
results in extended desktop mode being applied. Further details can be found
in topic number 737-30538
• Disconnecting display device no longer results in the ability to enable the
dis-connected display device within the Catalyst™ Control Center in a Cross-
Fire configured system. Further details can be found in topic number
737-31133
• Connecting a TV as the primary display device and setting the signal format
to any PAL mode no longer results in corruption being noticed on the secondary
display device when playing a media file using WinAmp or WinDVD.
Further details can be found in topic number 737-31134
• The Enable ATI Overdrive clocks for 3D applications only checkbox is now
checked and grayed out when the OverDrive option in the Catalyst™ Control
Center is unlocked. Further details can be found in topic number 737-30600
• Corruption is no longer noticed when enabling Theater mode and enabling
clone mode. Further details can be found in topic number 737-30546
• Dragging the WinDVD player from the primary display to the secondary display
no longer results in the player failing to respond. Further, closing the
WinDVD player using the Task Manager may result in the operating system
failing to respond. Further details can be found in topic number 737-29955
• With some h.264 titles that have MPEG2 intros, playback no longer switches
from hardware accelerated to software once the introductory content is finished.
Further details can be found in topic number 737-28517
• On certain products, dragging player window from primary to secondary display
no longer results in hardware acceleration being disabled which resulted
in the CPU usage increasing. Further details can be found in topic number
737-28516
• DXVA is now in use when play H264/VC1 HD content on systems containing
an ATI Radeon™ HD 2600 series of product. Further details can be found in
topic number 737-31137
• Enabling tiling on the secondary display device when Overlay Theater Mode
is enable no longer result in corruption being noticed. Further details can be
found in topic number 737-31138
• Corruption is no longer noticed on the secondary display device when Overlay
Theater Mode is enabled. Further details can be found in topic number
737-31139
• Enabling clone mode no longer results in corruption being noticed on both
display devices when Overlay Theater mode is enabled and the 3D screen
saver becomes active. Further details can be found in topic number 737-31141
Resolved Issues for the Windows XP Professional x64
Edition
This section provides information on resolved issues in this release of the ATI
Catalyst™ Software Suite for Windows XP Professional x64 Edition operating
system. These include
ATI Catalyst™ Release Note 11
• Prey: Corruption is no longer noticed when a player's face is two toned. Further
details can be found in topic number 737-31142
• Catalyst™ Control Center->OverDrive: The Windows XP Professional x64
Edition operating system no longer fails to resume from sleep mode when the
ATI OverDrive page is active. Further details can be found in topic number
737-31143
Known Issues Under the Windows Vista Operating
System
This section provides information on known issues associated with the ATI Catalyst
™. These include:
• City of Heroes: Attempting to play the game on a system with a dual link
panel connected to it may result in the Windows Vista operating system failing
to respond. Further details can be found in topic number 737-28495
• Half-Life 2: Episode 2: Playing the game on a system containing an ATI
Radeon™ HD 3800 series of product no longer results in the game failing to
the desktop when CrossFire is enabled. Further details can be found in topic
number 737-30753
• Lost Planet: Setting AA to either 4x or 8x may result in the game failing to
respond. Further details can be found in topic number 737-28492
• Oblivion: Flickering may be noticed when first making a move if the in-game
settings are set to maximum, CrossFire is enabled and AF is set to 16x. Further
details can be found in topic number 737-31152
• Oblivion: The game may fail or display corruption may be noticed when the
game is minimized to desktop and then restored. Further details can be found
in topic number 737-31151
• Unreal Tournament 3: The game may intermittently fail to launch when a
map has texture detail set to maximum. Further details can be found in topic
number 737-31189
• World In Conflict: The game may fail to the Windows desktop when the display
resolution is set to 1280x768 and AF is set to 16x. Further details can be
found in topic number 737-30752
• Resuming from an S3 state may result in a longer than expected time for the
Windows Vista operating system to resume. Further details can be found in
topic number 737-25798
• Catalyst™ Control Center->OverDrive™: The OverDrive™ setting are not
retained for individual accounts. Further details can be found in topic number
737-25805
• The Record function currently fails to work when using an ATI All-In-Wonder
™ X1300 and time shifting is enabled. Further information can be found in
topic number 737-22014
• A green or black screen may be displayed when configuring MCE to ATSC
mode. Further details can be found in topic number 737-27622
ATI Catalyst™ Release Note 12
• The 3D aspect may appear blank when launching a second instance of the
Catalyst™ Control Center™. This issue may also be experienced under the
Windows XP operating system. Further details can be found in topic number
737-28482
• The Catalyst™ Control Center version number may fail to be updated after
the installation of a newer Catalyst™ Control Center. Further details can be
found in topic number 737-28493
• Dragging player window to secondary display while playing back HD content
and moving it back to primary may result in blank player window. Further
details can be found in topic number 737-28496
• Connecting a secondary display device and enabling CrossFire™, followed
by disabling CrossFire™ no longer results in CrossFire™ pages in the Catalyst
™ Control Center showing that it is enabled. Further information on this
issue may be found in topic number 737-28845
• The Catalyst™ Control Center version number may fail to be updated after
the installation of a newer Catalyst™ Control Center. Further details can be
found in topic number 737-28493
• Performing an express install of the Catalyst™ Control Center may result in
an error message being displayed when rebooting the system. Further details
can be found in topic number 737-29532
• A black window may be displayed when attempting to play a DVD title using
WinDVD 7 when Overlay Theater Mode and clone mode is enabled. Further
details can be found in topic number 737-29539
• Enabling extended desktop mode and setting the display resolution to
1280x800 or higher, followed by playing an HD-DVD using PowerDVD,
may results in the HD-DVD title failing to play. Further details can be found
in topic number 737-29547
• Creating a secondary user account and switching from the secondary user
account to the primary user account may result in CrossFire™ failing to be
enabled. Further details can be found in topic number 737-28786
• The color depth may change to 8 bpp when enabling or disabling CrossFire™
for the first time. Further details can be found in topic number 737-29940
• The Catalyst™ Control Center version number may fail to be updated after
the installation of a newer Catalyst™ Control Center. Further details can be
found in topic number 737-28493
• Frame flipping may occur while playing certain VC-1 content titles. Further
details can be found in topic number 737-27804
• Rebooting the operating system after changing the skin to any available
option other than system skin may result in the Catalyst™ Control Center
menu options no longer being visible. Further details can be found in topic
number 737-30569
• The Catalyst™ Control Center menu option may fail to function when changing
the skin from system skin to any other available skin. Further details can
be found in topic number 737-30570
ATI Catalyst™ Release Note 13
• Installing the WDM driver on systems containing an ATI TV Tuner product
and an ATI graphics adapter may result in the WDM driver failing to install.
Further details can be found in topic number 737-30571
• Connecting a secondary display device using the HDMI connector and
enabling either clone mode or extended desktop mode may result in the
WinDVD 7 player playing in a windowed mode on both display devices when
Overlay Theater Mode is enabled. Further details can be found in topic number
737-30579
• The color depth may change to 8 bpp when enabling or disabling CrossFire™
for the first time. Further details can be found in topic number 737-30583
• The Windows Vista operating system may fail to respond when running the
Auto-tune utility found in the Catalyst™ Control Center OverDrive™ option.
Further details can be found in topic number 737-30584
• Connecting a secondary display device to a system containing an ATI
Radeon™ x1200/1250/1270 series of product and enabling clone mode or
extended desktop mode may result in horizontal line corruption being noticed
when using a high refresh rate and display resolution. Further details can be
found in topic number 737-31144
• Using the hot-key function to switch between various display scenarios may
result in the HDMI display device displaying a blank screen. Further details
can be found in topic number 737-31145
• The secondary HDMI Display may turn off when resuming from an S1 hibernation
with an HDMI display connected. Further details can be found in topic
number 737-31146
• Connecting a secondary display device using the HDMI connector and
enabling either clone mode or extended desktop mode may result in the
WinDVD 7 player playing in a windowed mode on both display devices when
Overlay Theater Mode is enabled. Further details can be found in topic number
737-30579
• Resuming from hibernation mode with HDMI display connected may result
in a black screen with only a mouse cursor being displayed. Further details
can be found in topic number 737-31149
• Setting the desktop resolution to 1600x1200 or greater may result in green
pixel corruption being noticed when playing certain games. This issue maybe
noticed when using a system running Windows Vista and containing an ATI
Radeon™ HD 2600 or HD 2400 series of product. Further details can be
found in topic number 737-31150
• The color depth may change to 8 bpp when enabling or disabling CrossFire
for the first time. Further details can be found in topic number 737-30583
• Enabling extended desktop mode and setting the display resolution to
1280x800 or higher, followed by playing an HD-DVD using PowerDVD,
may results in the HD-DVD title failing to play. Further details can be found
in topic number 737-29547
• Dragging the player window to a secondary display while playing back HD
content and moving it back to primary may result in blank player window.
Further details can be found in topic number 737-28496
ATI Catalyst™ Release Note 14
• Frame flipping may occur while playing certain VC-1 content titles. Further
details can be found in topic number 737-27804
• Attempting to play the HD-DVD title Harsh Times, School for Scoundrels
using the Cyberlink player may result in block corruption being noticed. Further
details can be found in topic number 737-31155
• Connecting a secondary display device and enabling clone mode may result in
the inability of changing the display configuration when resuming from an S4
state. Further details can be found in topic number 737-31157
• The OverDrive page may be grayed out and the GPU and memory clocks as
may be displayed as 000 after enabling CrossFire on systems containing and
ATI Radeon™ X1900 CrossFire Edition and running Windows Vista (64 bit
version). Further details can be found in topic number 737-31161
• Enabling CrossFire on a system containing an ATI Radeon™ X1900 Cross-
Fire Edition product may result in the Windows Vista (64 bit version) failing.
Further details can be found in topic number 737-31163
• Connecting an HDMI display device as the primary and setting the display
resolution to 1280x1024 may result in an error message when attempting to
personalize the display settings. Further details can be found in topic number
737-31165
Known Issues Under the Windows XP Operating
System
The following section provides a summary of open issues in the latest version of
Catalyst™. These include:
• Call of Juarez: Setting the game level with Optimal Quality and high
in-game settings may result in the game level being blank. Further details can
be found in topic number 737-30591
• City of Heroes: A fatal error message may be displayed when exiting the
game and attempting to launch the Catalyst™ Control Center™ in Advanced
mode. Further details can be found in topic number 737-28514
• Enemy Territory: Quake Wars may have corruption on the water and sky
after increasing the game resolution. Restarting the game at that higher resolution
or issuing reloadImages command in the game console corrects the corruption.
This issue only impacts graphics cards up to the ATI Radeon™ X850.
Further details can be found in topic number 737-29947
• Lost Planet: Setting AA to either 4x or 8x may intermittently result in the
game failing to respond. Further details can be found in topic number
737-28492
• Star Wars Battlefront 2: Setting the in-game options as follows: Overall
Quality to High, View Distance to 99, LOD Distance to 99 and Anti-Aliasing
to 6x may result in the game's loading bar reaching the end but the game failing
to start. Further details can be found in topic number 737-29946
• Enabling CrossFire™ may result in display corruption being noticed when
playing a DVD or media clip using either WinDVD 7, Windows Media Player
or PowerDVD 6. Further details can be found in topic number 737-22806
ATI Catalyst™ Release Note 15
• Catalyst™ Control Center->OverDrive™: The OverDrive™ setting are not
retained for individual accounts. This issue may also be experienced under the
Windows Vista operating system. Further details can be found in topic number
737-25805
• Connecting two display devices to an ATI Radeon™ X1600 series product
may result in the device manager failing to detect the secondary display
device. Further information may be found in topic number 737-21266
• Installing the HDMI audio driver and the VIA audio chipset driver may
results in a compatibility issue being noticed and a yellow exclamation mark
showing up in the Sound, Video and Game Controllers. Further details can be
found in topic number 737-28833
• Installing the Catalyst™ Control Center on a previously installed version may
results in a warning message that the setup is installing over an earlier version,
and that the previous version needs to be uninstalled before installing a more
current version, resulting in the Catalyst™ Control Center failing to be
installed. Further details can be found in topic number 737-28513
• Performing a fast user switch when running overfly.exe in Overlay Theater
Mode may result in overfly.exe failing when switching back. Further details
can be found in topic number 737-29951
• Catalyst™ Control Center: Configuring a system with multi-adapters may
result in an error message being displayed when running the Test Custom
Clocks. Further details can be found in topic number 737-29953
• Connecting a CRT display device as the secondary display and playing a
Blu-ray DVD using a Cyberlink player may result in no video playback if
extended desktop mode is enabled. Further details can be found in topic number
737-30587
• Connecting a Dual Link Panel to the on-board DVI port, followed by hot
plugging a DVI display to the add-on DVI card may result in clone mode
becoming disabled when rebooting the machine and the secondary display
device remaining blank. Further details can be found in topic number
737-31166
• The movement of pictures may not appear smooth under Excel (Office2007)
when the color depth is set to 16bpp. Further details can be found in topic
number 737-31167
• The Catalyst Control Center menu option may fail to function when changing
the skin from system skin to any other available skin. Further details can be
found in topic number 737-30570
• The 3D aspect may appear blank when launching a second instance of the
Catalyst™ Control Center. Further details can be found in topic number
737-28482
• Performing an express install of the Catalyst™ Control Center may result in
an error message being displayed when rebooting the system. Further details
can be found in topic number 737-29532
• The AVIVO TV controls are not available under the Windows Media Center
Edition operating system. Further details can be found in topic number
737-31170
ATI Catalyst™ Release Note 16
• Setting the display resolution to 1440x900 or lower may result in corruption
being noticed when playing a DVD title. Further details can be found in topic
number 737-31168
• The scaling function may fail under certain resolutions in the Catalyst™ Control
Center. Further details can be found in topic number 737-31169
• Setting the desktop resolution to 1280x1024 and using PowerDVD to play an
HD-DVD or Blu-ray title may result in corruption being noticed when using
an ATI Radeon™ HD 2400 series of product. Further details can be found in
topic number 737-31171
• On certain products, changing display resolution while playing back High
Definition content may results in instability. It is recommended to set appropriate
resolution while playback is stopped. Further details can be found in
topic number 737-31172
• Cyberlink: Playing a DVD title on a system containing an ATI Radeon™ HD
2400 series may result in corruption being noticed. Further details can be
found in topic number 737-31173
• Connecting a CRT display device as the secondary display and playing a
Blu-ray DVD using a Cyberlink player may result in no video playback if
extended desktop mode is enabled. Further details can be found in topic number
737-30587
• The floppy drive may fail to read or write under Vista on Dell XPS410 system.
Further details can be found in topic number 737-31148
Known Issues Under the Windows XP Professional x64
Edition
The following section provides a summary of open issues in the latest version of
Catalyst™. These include:
• FAR CRY: Playing the game on a system running either the Windows XP
Professional x64 Edition or Windows XP operating system may result in corruption
being noticed when using an ATI Radeon™ Xpress 1200 series of
products. Further information can be found in topic number 737-23452
• Running an OpenGL application and attempting to rotate the desktop may
result in corruption being noticed. Further details can be found in topic number
737-29556
• The Record function currently fails to work when using an ATI All-In-Wonder
™ X1300 and time shifting is enabled. Further information can be found in
topic number 737-22014
• Running an OpenGL application and attempting to rotate the desktop may
result in corruption being noticed. Further details can be found in topic number
737-29556
For further information and general help on software driver installation, game
issues, and more, visit ATI Customer Care.
ATI Catalyst™ Release Note 17
Installing the Catalyst™ Vista Software Driver
Installation information can be found at: ati.amd.com
AMD Customer Care
The AMD Customer Care website provides a high level of technical support and
ease of navigation. The AMD Customer Care website provides accurate and
up-to-date product support for optimum usability and performance. Technical
issues are categorized and personalized to enhance user experience. The AMD
Customer Care Website can be found at: support.ati.com
To view a known issue or find troubleshooting information, do the following:
1 Go to ati.amd.com. The AMD home page is displayed.
2 Click on Customer Care and select Radeon™ (PC/Mac). The ATI Customer
Care web page is displayed.
3 Select Knowledge base. The AMD knowledge base is displayed.
4 In the top right corner of the page, select Advanced Search. The Advanced
Search page is displayed.
5 Select the option you wish to search by.
6 Click SEARCH. The information requested (if available) is displayed.
Catalyst™ Crew Driver Feedback
This driver release incorporates suggestions received through the Catalyst™
CREW Driver Feedback program. To provide us with your feedback, visit: Catalyst
™ Crew Driver Feedback.
http://bbs.chiphell.com/viewthread.php?tid=13942&extra=page%3D1
Da dürfte der Treiber wohl nicht mehr lange auf sich warten lassen.