nTune zeigt nur müll an

[Saugbär]

Bei mir wird fast kein Gerät erkannt, bis auf Grafikkarte trotz Nforce4 ultra chipsatz.
ist das normal oder nur ein bug bei mir?

hier ein auszug aus dem log

========== Processor, Bus, and Memory Speed Information ==========

CPU Speed = -1292310478.870
CPU Multiplier = 4.000
FSB Frequency = 0
Memory Frequency = 0.000
AGP Frequency = 0
tRas = 0
tRcd = 0
tRp = 0
tRc = 0
tWr = 0
tRrd = 0
tRwt = 0
tWtr = 0
tWrrd = 0
tWrwr = 0
tRdrd = 0
tRef = 0

========== GPU's Core and Memory Speed Information ==========


GPU Core Speed = 650
GPU Memory Speed = 950

========== System Voltage Information ==========

CPU Voltage = 0.000 v
Core Voltage = 0.000 v
AGP Voltage = 0.000 v
Aux Voltage = 0.000 v
Memory Voltage = 0.000 v

========== Processor and System's Temperature Information ==========

CPU Temperature = Not Reported
System Temperature = Not Reported
GPU 0 Temperature = 51 C

========== Memory SPD Information ==========

Memory Dimm 0 (0x50) Memory not present
Memory Dimm 1 (0x51) Memory not present
Memory Dimm 2 (0x52) Memory not present
Memory Dimm 3 (0x53) Memory not present
Memory Dimm 4 (0x54) Memory not present
Memory Dimm 5 (0x55) Memory not present
Memory Dimm 6 (0x56) Memory not present
Memory Dimm 7 (0x57) Memory not present

[fellpower]

bei dir funzt ntune?

ich bekomms zwar installiert, aber sobald ichs starte -->bluescreen
sowohl unter xp sp2 32bit als unter vista ultimate 64bit..:/

[Moralelastix]

Es fehlen die Konfigfiles von deinem Hersteller. NV zwingt die nicht dazu welche zu machen.
Deshalb kann Ntune nur Müll anzeigen.

Toll was!

Is bei mir genau so.

Ich hab auch noch nirgends was gefunden ob man diese Konfigfiles selbst erstellen kann.

Die Konfigfiles die bei NTune dabei sind kann man zwar einsehen aber damit kann ich nix anfangen.
Und ne Doku gibts scheints net.

[Saugbär]

Nachdem ich es nochmal neu installiert hab, sieht es schon wieder ganz anders aus, aber viele Punkte sind angegraut. Die Lüfterdrehzahen werden falsch ausgelesen 31000 rmp, Alarmtemperatur für die arme Graka auf 190°.
Naja das ding hat wohl noch "Alphastatus"
Der Systemmonitor zeigt nur die Speicherauslastung und die Temperatur der Graka grafisch an



========== Processor, Bus, and Memory Speed Information ==========

CPU Speed = 2200.321
CPU Multiplier = 10.000
FSB Frequency = 220
Memory Frequency = 440.000
PCIE Frequency = 2500
tRas = 6
tRcd = 3
tRp = 3
tRc = 0
tWr = 0
tRrd = 0
tRwt = 0
tWtr = 0
tWrrd = 0
tWrwr = 0
tRdrd = 0
tRef = 0

========== GPU's Core and Memory Speed Information ==========

GPU Core Speed = 650
GPU Memory Speed = 950

========== System Voltage Information ==========

CPU Voltage = 1.350 v
Core Voltage = 0.000 v
AGP Voltage = 0.000 v
Aux Voltage = 0.000 v
Memory Voltage = 2.650 v

========== Processor and System's Temperature Information ==========

CPU Temperature = 39 C
System Temperature = 42 C
GPU 0 Temperature = 51 C

========== Memory SPD Information ==========

Memory Dimm 0 (0x50)
Memory type: DDR SDRAM
Error correction: NONE
Voltage interface level: SSTL (2.5V)
Data width: 64 bits
Number of physical banks: 2 (double sided)
Number of logical banks: 4
Number of row addresses: 13 13
Number of col addresses: 11 11
Bank density: 512 512 MB
Primary RAM Width: 8 8 bits
Error checking RAM Width: 0 0 bits
Module density: 1024 MB
Refresh rate: 7812.500 us
Self-refresh: Ja
Burst lengths supported: 2 4 8
CAS 2.5:
Cycle time (tCYC) = 5.000 ns fMax = 200.000 Mhz
Access time (tAC) = 0.700 ns fMax = 1428.571 MHz
CS supported: 0.0 clocks
WE supported: 1.0 clocks
Min delay, Bk/Bk random cols: 1 clocks
Min row precharge time (tRP): 15.000 ns
Min row active delay (tRRD): 10.000 ns
Min RAS to CAS delay (tRCD): 15.000 ns
Min Actv to precharge (tRAS): 30.000 ns
Addr/Cmd setup time: 0.600 ns
Addr/Cmd hold time: 0.600 ns
Data setup time: 0.400 ns
Data hold time: 0.400 ns
Buffered address & Control Ja
Registered address & Control Ja
On-card PLL: Nein
FET switch on-card enable: Nein
FET switch external enable: Nein
Differential clock input: Ja
Includes weak driver: Nein
Includes QFC output: Nein
Lower Vdd tolerence: 0.2 V
Upper Vdd tolerence: 0.2 V
Manufacturer's JEDEC ID code: 000000cd 7f7f7f7f
Module manufacturing location: 0 (manufacture dependant)
Module part number: NS
Module revision code: 0 (manufacture dependant)
Module manufacturing date: Not reported
Module serial number: 00000000
SPD revision: 0.0

Memory Dimm 1 (0x51)
Memory type: DDR SDRAM
Error correction: NONE
Voltage interface level: SSTL (2.5V)
Data width: 64 bits
Number of physical banks: 2 (double sided)
Number of logical banks: 4
Number of row addresses: 13 13
Number of col addresses: 11 11
Bank density: 512 512 MB
Primary RAM Width: 8 8 bits
Error checking RAM Width: 0 0 bits
Module density: 1024 MB
Refresh rate: 7812.500 us
Self-refresh: Ja
Burst lengths supported: 2 4 8
CAS 2.5:
Cycle time (tCYC) = 5.000 ns fMax = 200.000 Mhz
Access time (tAC) = 0.700 ns fMax = 1428.571 MHz
CS supported: 0.0 clocks
WE supported: 1.0 clocks
Min delay, Bk/Bk random cols: 1 clocks
Min row precharge time (tRP): 15.000 ns
Min row active delay (tRRD): 10.000 ns
Min RAS to CAS delay (tRCD): 15.000 ns
Min Actv to precharge (tRAS): 30.000 ns
Addr/Cmd setup time: 0.600 ns
Addr/Cmd hold time: 0.600 ns
Data setup time: 0.400 ns
Data hold time: 0.400 ns
Buffered address & Control Ja
Registered address & Control Ja
On-card PLL: Nein
FET switch on-card enable: Nein
FET switch external enable: Nein
Differential clock input: Ja
Includes weak driver: Nein
Includes QFC output: Nein
Lower Vdd tolerence: 0.2 V
Upper Vdd tolerence: 0.2 V
Manufacturer's JEDEC ID code: 000000cd 7f7f7f7f
Module manufacturing location: 0 (manufacture dependant)
Module part number: NS
Module revision code: 0 (manufacture dependant)
Module manufacturing date: Not reported
Module serial number: 00000000
SPD revision: 0.0
Memory Dimm 2 (0x52) Memory not present
Memory Dimm 3 (0x53) Memory not present
Memory Dimm 4 (0x54) Memory not present
Memory Dimm 5 (0x55) Memory not present
Memory Dimm 6 (0x56) Memory not present
Memory Dimm 7 (0x57) Memory not present