Debian 2.2 gesucht / Problem mit Olicom Token Ring-Karte

[Popopinsel]

Edit: Ich habe den Titel des Threads wegen des neuen Problems geändert (vorher: Debian 2.2 gesucht / Problem mit Olicom Token Ring-Karte)! Das neue Problem wird am Ende von Seite 1 erstmals beschrieben, weitere Details auf Seite 2+!

Tag zusammen,

ich möchte eine Olciom Token Ring PCI-Netzwerkkarte unter Debian zum laufen bringen, doch weder beinhaltet das aktuelle Debian die dafür nötigen Treiber, noch lassen sich im Internet welche für den Kernel 2.6 auffinden.

Alles, was ich finden konnte, ist ein Treiber für Kernel 2.2.5 (olicom.patch-32-2.2.5). Ich habe bereits versucht, diesen Treiber mit dem 2.6er Kernel neu zu kompilieren, bisher jedoch ohne Erfolg (wobei ich anmerken muss, dass ich was Linux angeht ein ziemlicher Noob bin!).

Jetzt bin ich auf der Suche nach einer alten Debian 2.2er Version (Potato), die ich allerdings bisher auf keinem Server gefunden habe. Wenn natürlich jemand weiß, wie man das ganze mit dem aktuellen Debian ans laufen bekommt, lasst es mich wissen!

[Berni]

Scheint ziemlich alt zu sein, evtl. geht das ftp://ftp.ringdale.com/support/Madge/LSS_v9_2/DRIVERS/LINUX/ für die Karte wenn du ne Distribution mit 2.4er Kernel nimmst (hatte wer in nem Beitrag geschrieben auch wenn das bissel ne andere Firma ist). Außerdem kannst du von kernel.org auch nen 2.2er Kernel runterlade und kompilieren. Sollte grundsätzlich auch mit einem aktuellen Debian laufen denk ich mal (ohne Gewähr).

Aber was ganz Anderes: Kannst du keine andere TokenRing-Karte kaufen (sofern du denn wirklich TokenRing brauchst)? So ne IBM mit ibmtr- oder olympic-Treiber sollte auch unter dem aktuellsten 2.6er-Kernel laufen und vielleicht 5€ in der eBucht kosten. Sehe da wenig Sinn dahinter sich wegen den paar € stundenlang mit so ner seltsamen Karte abzugeben...

[Popopinsel]

Ist leider ein Auftrag von meinem Chef. Es handelt sich hierbei quasi um eine pädagogische Maßnahme, weil ich in der Mittagspause einen Galgen geknüpft und nen kleinen Stoffpinguin gehengt habe (man muss Auch mal Flagge zeigen, oder? ^^):

http://img388.imageshack.us/img388/2384/linuxownedci1.th.png (http://img388.imageshack.us/my.php?image=linuxownedci1.png)

Daher muss das auf Teufel komm raus funktionieren! ;-)

[Olleg]

Pfui. Und dir sollen wir helfen?? :)

[Popopinsel]

Ich bitte darum. =)

Was nicht ist, kann ja noch werden, oder? ;-)

[Corny]

Falls du schummeln willst hätte ich einen Sack voll Token Ring Hardware hier herum liegen ;)

[Berni]

Wie lautet denn die pädagogische Maßnahme genau? Vielleicht gibts da ja Auslegungsspielraum ;)

Beweisen, dass Linux besser ist, wird dein Chef mit der Maßnahme aber sicher nicht sondern eher die in deinem Foto dargestellte Meinung etwas verfestigen (auch wenn es für diese Karte wohl auch bei aktuellen Windows-Versionen keine Treiber gibt) :D

Beim googeln hab ich übrigens das gefunden: http://mirror.klabs.be/debian-cd/potato/2.2_rev7/iso/i386/ Vielleicht hilfts ja...

[Popopinsel]

Falls du schummeln willst hätte ich einen Sack voll Token Ring Hardware hier herum liegen ;)

Das ist nicht so das Problem, ich glaube wir haben auch mehr als einen Sack an PCI/ISA-Karten bei uns im Lager liegen... ;)

Wie lautet denn die pädagogische Maßnahme genau? Vielleicht gibts da ja Auslegungsspielraum ;)

Beweisen, dass Linux besser ist, wird dein Chef mit der Maßnahme aber sicher nicht sondern eher die in deinem Foto dargestellte Meinung etwas verfestigen (auch wenn es für diese Karte wohl auch bei aktuellen Windows-Versionen keine Treiber gibt) :D

Beim googeln hab ich übrigens das gefunden: http://mirror.klabs.be/debian-cd/potato/2.2_rev7/iso/i386/ Vielleicht hilfts ja...

Also ich, als nicht-paranoider Windows-Verfechter und Linux-Nub, soll einen unserer neueren Rechner (nForce5, Athlon64, Radeon X1600) als Linux-Router konfigurieren, welcher zwischen einem Ethernet- und einem Token Ring-Netz routet. Als Distri MUSS Debian benutzt werden (so will es il capo)! Die Token Ring-Karten sind alle von Olicom (super Website haben die -.-), die meisten OC-3137. Bisher haben wir für das ganze unsere ganz alten Rechner benutzt (Pentium2 & 3 etc.), wo wir dann ISA-Karten (IBM -> ibmtr) benutzt haben.

Jedenfalls bekomm ichs einfach nicht gebacken (den Kernel schon), dass sich die Karte initialisieren lässt. Ich probier und probier und guck Linux Stunden dabei zu, wie Abertausende Zeilen für mich kryptischen Codes über den Monitor laufen, aber bin nach 3 Tagen zu keinem brauchbaren Ergebnis gekommen. oO

Ich werde mir morgen mal die von Dir verlinkte CD herunterladen und das ganze nochmal probieren! Danke Dir!

[Popopinsel]

Leider gibt der Server, auf dem die 2.2er-Version liegt, nur einstellige kB/s her. -.-

Kennt nich noch jemand eine andere Seite, wo ich Debian Potato herunterladen kann?

[piepre]

solche aufgaben hätte ich auch gerne :)

Bei Debian Sarge sollte man auch noch mit nem 2.2er Kernel zum laufen bekommen.

[Berni]

Leider gibt der Server, auf dem die 2.2er-Version liegt, nur einstellige kB/s her. -.-

Kennt nich noch jemand eine andere Seite, wo ich Debian Potato herunterladen kann?
Hättest halt gestern abend anfangen müssen...

[Popopinsel]

solche aufgaben hätte ich auch gerne :)

Bei Debian Sarge sollte man auch noch mit nem 2.2er Kernel zum laufen bekommen.

Problem: Sarge erkennt die SATA-Platte net -.-

[piepre]

dann wird das mit nem 2.2er kernel wohl auch nichts werden, kannst du nicht ne pata platte dranhängen?
mich windert es eh, dass im 2.6er kernel keine unterstüzung drin ist, aber ein:

grep Olicom -R linux-2.6.27.5
linux-2.6.27.5/drivers/net/tlan.c: { "Olicom OC-2183/2185", TLAN_ADAPTER_USE_INTERN_10, 0x83 },
linux-2.6.27.5/drivers/net/tlan.c: { "Olicom OC-2325", TLAN_ADAPTER_UNMANAGED_PHY, 0xF8 },
linux-2.6.27.5/drivers/net/tlan.c: { "Olicom OC-2326", TLAN_ADAPTER_USE_INTERN_10, 0xF8 },
linux-2.6.27.5/drivers/net/Kconfig: Compaq NetFlex and Olicom cards. Please read the file
linux-2.6.27.5/drivers/eisa/eisa.ids:OLC0701 "Olicom ISA 16/4 Token-Ring Network Adapter"
linux-2.6.27.5/drivers/eisa/eisa.ids:OLC0702 "Olicom OC-3117, ISA 16/4 Adapter (NIC)"
linux-2.6.27.5/drivers/eisa/eisa.ids:OLC0801 "OC-3118 Olicom ISA 16/4 Token-Ring Network Adapter"
linux-2.6.27.5/drivers/eisa/eisa.ids:OLC0901 "Olicom EISA 16/4 Token-Ring Network Adapter"
linux-2.6.27.5/drivers/eisa/eisa.ids:OLC0902 "Olicom EISA 16/4 Token-Ring Network Adapter"
linux-2.6.27.5/drivers/eisa/eisa.ids:OLC0B01 "Olicom PCA 16/4 Token-Ring Network Adapter"
linux-2.6.27.5/drivers/eisa/eisa.ids:OLC1201 "Olicom 32 Bit EISA 16/4 Token-Ring Network Adapter"
linux-2.6.27.5/Documentation/networking/tlan.txt: 108d 0012 Olicom OC-2325
linux-2.6.27.5/Documentation/networking/tlan.txt: 108d 0013 Olicom OC-2183
linux-2.6.27.5/Documentation/networking/tlan.txt: 108d 0014 Olicom OC-2326
linux-2.6.27.5/Documentation/networking/00-INDEX: - ThunderLAN (Compaq Netelligent 10/100, Olicom OC-2xxx) driver info.
linux-2.6.27.5/Documentation/networking/olympic.txt:been tested with ibmtr.c running, and I personally have had one Olicom PCI

zeigt nichts von einer OC-3137, gibt wohl wirklich nur den Treiber für Kernel 2.2x, der wird aber auf dem aktuellen PC nicht laufen...

ist denn über "cat /proc/pci" bei einem aktuellen Kernel irgendetwas von der Karte zu sehen?

[Popopinsel]

dann wird das mit nem 2.2er kernel wohl auch nichts werden, kannst du nicht ne pata platte dranhängen?
mich windert es eh, dass im 2.6er kernel keine unterstüzung drin ist, aber ein:

grep Olicom -R linux-2.6.27.5
linux-2.6.27.5/drivers/net/tlan.c: { "Olicom OC-2183/2185", TLAN_ADAPTER_USE_INTERN_10, 0x83 },
linux-2.6.27.5/drivers/net/tlan.c: { "Olicom OC-2325", TLAN_ADAPTER_UNMANAGED_PHY, 0xF8 },
linux-2.6.27.5/drivers/net/tlan.c: { "Olicom OC-2326", TLAN_ADAPTER_USE_INTERN_10, 0xF8 },
linux-2.6.27.5/drivers/net/Kconfig: Compaq NetFlex and Olicom cards. Please read the file
linux-2.6.27.5/drivers/eisa/eisa.ids:OLC0701 "Olicom ISA 16/4 Token-Ring Network Adapter"
linux-2.6.27.5/drivers/eisa/eisa.ids:OLC0702 "Olicom OC-3117, ISA 16/4 Adapter (NIC)"
linux-2.6.27.5/drivers/eisa/eisa.ids:OLC0801 "OC-3118 Olicom ISA 16/4 Token-Ring Network Adapter"
linux-2.6.27.5/drivers/eisa/eisa.ids:OLC0901 "Olicom EISA 16/4 Token-Ring Network Adapter"
linux-2.6.27.5/drivers/eisa/eisa.ids:OLC0902 "Olicom EISA 16/4 Token-Ring Network Adapter"
linux-2.6.27.5/drivers/eisa/eisa.ids:OLC0B01 "Olicom PCA 16/4 Token-Ring Network Adapter"
linux-2.6.27.5/drivers/eisa/eisa.ids:OLC1201 "Olicom 32 Bit EISA 16/4 Token-Ring Network Adapter"
linux-2.6.27.5/Documentation/networking/tlan.txt: 108d 0012 Olicom OC-2325
linux-2.6.27.5/Documentation/networking/tlan.txt: 108d 0013 Olicom OC-2183
linux-2.6.27.5/Documentation/networking/tlan.txt: 108d 0014 Olicom OC-2326
linux-2.6.27.5/Documentation/networking/00-INDEX: - ThunderLAN (Compaq Netelligent 10/100, Olicom OC-2xxx) driver info.
linux-2.6.27.5/Documentation/networking/olympic.txt:been tested with ibmtr.c running, and I personally have had one Olicom PCI

zeigt nichts von einer OC-3137, gibt wohl wirklich nur den Treiber für Kernel 2.2x, der wird aber auf dem aktuellen PC nicht laufen...

ist denn über "cat /proc/pci" bei einem aktuellen Kernel irgendetwas von der Karte zu sehen?

Das könnte ich tun, mein Chef möchte aber, dass es mit den SATA-Platten funktioniert! :|

Die Karte wird per lspci angezeigt. Ich werd morgen nochmal dran tüfteln, vielleicht besorg ich mir dann mal den aktuellen 2.6.x'er Kernel (aktuell Debian 4.0_r5 mit Kernel 2.6.18-6), vielleicht klappts ja dann damit.

Ist auf jedenfall zum Mäusemelken die ganze Sache... :tongue:

[Berni]

Also für den 2.2er Kernel wirds wohl kaum aktuelle SATA-Treiber geben und wenn der Treiber für diese olle Karte nur für den 2.2er Kernel verfügbar ist, dann ist das ziemlich unmöglich (außer du portierst den Treiber irgendwie aber das dürfte durchaus...ähh...anspruchsvoll sein :D).

[thacrazze]

Also für den 2.2er Kernel wirds wohl kaum aktuelle SATA-Treiber geben und wenn der Treiber für diese olle Karte nur für den 2.2er Kernel verfügbar ist, dann ist das ziemlich unmöglich (außer du portierst den Treiber irgendwie aber das dürfte durchaus...ähh...anspruchsvoll sein :D).
iGentlich hat doch der 2.2er Kernel gar keinen SATA-Support?

Mein Tipp: Lern Linux zu mögen und 2. kauf dir neue TokenRing-Karten oder sag deinem Chef das dus nit hinkriegst ;)

[Berni]

SCSI-Support gibts halt und theoretisch könnte man darüber schon SATA-Festplatten einbinden. Ob das aber ein Hersteller macht...ich denke eher nicht.

[Lokadamus]

mmm...

Er könnte im Bios gucken, ob Sata als IDE laufen würde. Allerdings frage ich mich, ob die Kiste ein Raid hat oder nicht ...

[Popopinsel]

mmm...

Er könnte im Bios gucken, ob Sata als IDE laufen würde. Allerdings frage ich mich, ob die Kiste ein Raid hat oder nicht ...

Das hab ich als erstes gemacht, leider bietet das BIOS keine Möglichkeit, die SATA-Laufwerke im IDE-Modus laufen zu lassen...

[Popopinsel]

Neuer Stand der Dinge:

Ich habe mir jetzt eine neuen neuen IBM PCI 16/4 Token Ring Adapter 2 WOL besorgt (olympic Treiber). Dieser wird auch per lspci angezeit, sogar bei der Installation von Debian (4.0 r5) wird die Karte beim auswählen des primären Netzwerkadapters als "tr0" aufgeführt.

Sobald ich die Karte jedoch initialisieren möchte (ifconfig tr0 up), fängt die grüne LED an der Karte sowie an der Mau zwar an zu leuchten (die Relais in der Mau klicken ebenfalls, also irgendwas tauscht sich da aus), jedoch erscheint mit einiger Zeit Verzögerung in der Konsole folgende Fehlermeldung:

SIOCSIFFLAG: Eingabe-/Ausgabefehler

Nach intensiven googlens scheint es ein Problem mit der IRQ-Verteilung zu sein, jedoch habe ich auch hier schon einiges ausprobiert (außerdem zeigt cat /proc/interrupts keine doppelte Belegung des IRQ der Karte an), wie IRQ im BIOS festlegen, Bootparameter acpi=off, pci=bios, pci=nobios etc.

Kann mir jemand des Rätsels Lösung verraten?

[Lokadamus]

mmm...

Kannst du einmal den Output von dmesg anhängen?

Kannst du auf der Kiste mal FreeBSD installieren und schauen, ob dort Fehler gemeldet werden? Sobald der Kopiervorgang läuft einmal ALT+F2 für Terminal 1 drücken, um während dem Dateikopieren zu sehen, ob es Fehler gibt. Mit Alt + F1 kommst du zum Terminal zurück.
Installationsanleitungen gibs bei http://www.youtube.com/results?search_query=freebsd

[Popopinsel]

mmm...

Kannst du einmal den Output von dmesg anhängen?

Kannst du auf der Kiste mal FreeBSD installieren und schauen, ob dort Fehler gemeldet werden? Sobald der Kopiervorgang läuft einmal ALT+F2 für Terminal 1 drücken, um während dem Dateikopieren zu sehen, ob es Fehler gibt. Mit Alt + F1 kommst du zum Terminal zurück.
Installationsanleitungen gibs bei http://www.youtube.com/results?search_query=freebsd

Hier erstmal das Ergebnis von dmesg:
fd0000 (usable)
BIOS-e820: 000000007ffd0000 - 000000007ffde000 (ACPI data)
BIOS-e820: 000000007ffde000 - 0000000080000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
Warning only 896MB will be used.
Use a HIGHMEM enabled kernel.
896MB LOWMEM available.
found SMP MP-table at 000ff780
On node 0 totalpages: 229376
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
DMI present.
ACPI: RSDP (v000 ACPIAM ) @ 0x000fa950
ACPI: RSDT (v001 A M I OEMRSDT 0x06000602 MSFT 0x00000097) @ 0x7ffd0000
ACPI: FADT (v002 A M I OEMFACP 0x06000602 MSFT 0x00000097) @ 0x7ffd0200
ACPI: MADT (v001 A M I OEMAPIC 0x06000602 MSFT 0x00000097) @ 0x7ffd0390
ACPI: MCFG (v001 A M I OEMMCFG 0x06000602 MSFT 0x00000097) @ 0x7ffd0400
ACPI: OEMB (v001 A M I AMI_OEM 0x06000602 MSFT 0x00000097) @ 0x7ffde040
ACPI: DSDT (v001 1ADGH 1ADGH000 0x00000000 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x2008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:15 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
Detected 2400.082 MHz processor.
Built 1 zonelists. Total pages: 229376
Kernel command line: root=/dev/sda3 ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 902096k/917504k available (1499k kernel code, 14828k reserved, 599k data, 256k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4803.92 BogoMIPS (lpj=9607855)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001d
CPU: After vendor identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001d
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 078bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001d
Compat vDSO mapped to ffffe000.
CPU: AMD Athlon(tm) 64 Processor 3800+ stepping 02
Checking 'hlt' instruction... OK.
ACPI: Core revision 20060707
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
checking if image is initramfs... it is
Freeing initrd memory: 4246k freed
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
Error attaching device data
Error attaching device data
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:06.0
Boot video device is 0000:06:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *15
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15
ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled by ACPI PNP
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:08: ioport range 0xa00-0xa0f has been reserved
pnp: 00:08: ioport range 0xa10-0xa1f has been reserved
PCI: Bridge: 0000:00:06.0
IO window: d000-dfff
MEM window: fea00000-feafffff
PREFETCH window: 88000000-880fffff
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0f.0
IO window: e000-efff
MEM window: feb00000-febfffff
PREFETCH window: d0000000-dfffffff
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
PCI: Setting latency timer of device 0000:00:0f.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1228296904.696:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:0b.0 to 64
pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
pcie_portdrv_probe->Dev[0378:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
pcie_portdrv_probe->Dev[0375:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
PCI: Setting latency timer of device 0000:00:0f.0 to 64
pcie_portdrv_probe->Dev[0377:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0f.0:pcie00]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
EISA: Probing bus 0 at eisa.0
Cannot allocate resource for EISA slot 2
EISA: Detected 0 cards.
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Using IPI Shortcut mode
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 256k freed
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: Getting cpuindex for acpiid 0x2
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0
NFORCE-MCP55: chipset revision 161
NFORCE-MCP55: not 100% native mode: will probe irqs later
NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:DMA
Probing IDE interface ide0...
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
hdb: HL-DT-STDVD-ROM GDR8164B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
SCSI subsystem initialized
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 225, io mem 0xfe9fb000
libata version 2.00 loaded.
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 22 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:08.0 to 64
forcedeth: using HIGHDMA
usb 1-1: new low speed USB device using ohci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
eth0: forcedeth.c: subsystem: 01462:7260 bound to 0000:00:08.0
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 21 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 50, io mem 0xfe9fac00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb 1-1: USB disconnect, address 2
ohci_hcd 0000:00:02.0: wakeup
usbcore: registered new driver hiddev
sata_nv 0000:00:05.0: version 2.0
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSA0] -> GSI 20 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:05.0 to 64
ata1: SATA max UDMA/133 cmd 0xC800 ctl 0xC482 bmdma 0xC000 irq 58
ata2: SATA max UDMA/133 cmd 0xC400 ctl 0xC082 bmdma 0xC008 irq 58
scsi0 : sata_nv
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
usb 1-1: new low speed USB device using ohci_hcd and address 3
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-7, max UDMA/133, 234441648 sectors: LBA48
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : sata_nv
usb 1-1: configuration #1 chosen from 1 choice
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input1
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-1
ata2: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0xC407
Vendor: ATA Model: WDC WD1200JS-00M Rev: 02.0
Type: Direct-Access ANSI SCSI revision: 05
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LSA1] -> GSI 23 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:05.1 to 64
ata3: SATA max UDMA/133 cmd 0xBC00 ctl 0xB882 bmdma 0xB400 irq 225
ata4: SATA max UDMA/133 cmd 0xB800 ctl 0xB482 bmdma 0xB408 irq 225
scsi2 : sata_nv
ata3: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0xBC07
scsi3 : sata_nv
ata4: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0xB807
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 <<6>hdb: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
sda5 >
sd 0:0:0:0: Attached scsi disk sda
Attempting manual resume
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
ts: Compaq touchscreen protocol output
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x2d00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2e00
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 66
Olympic.c v1.0.5 6/04/02 - Peter De Schrijver & Mike Phillips
0000:01:00.0. I/O at d800, MMIO at f884ac00, LAP at f88fe000, using irq 66
Real Time Clock Driver v1.12ac
input: PC Speaker as /class/input/input2
Olympic: 0000:01:00.0 registered as: tr0
Adding 2650684k swap on /dev/sda5. Priority:-1 extents:1 across:2650684k
EXT3 FS on sda3, internal journal
loop: loaded (max 8 devices)
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A


Ich hoffe Du kannst damit was anfangen! :redface: Werd jetzt mal testweise Ubuntu installieren, mal schauen ob der Fehler dort auch auftritt...

[Popopinsel]

Hier mal die Ausgabe unter Ubuntu 8.10:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008 (Ubuntu 2.6.27-7.14-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable)
[ 0.000000] BIOS-e820: 000000007ffd0000 - 000000007ffde000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ffde000 - 0000000080000000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] last_pfn = 0x7ffd0 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000
[ 0.000000] RAMDISK: 37822000 - 37fef058
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000FA950, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 7FFD0000, 0034 (r1 A M I OEMRSDT 6000602 MSFT 97)
[ 0.000000] ACPI: FACP 7FFD0200, 0084 (r2 A M I OEMFACP 6000602 MSFT 97)
[ 0.000000] ACPI: DSDT 7FFD0440, 64B1 (r1 1ADGH 1ADGH000 0 INTL 2002026)
[ 0.000000] ACPI: FACS 7FFDE000, 0040
[ 0.000000] ACPI: APIC 7FFD0390, 0070 (r1 A M I OEMAPIC 6000602 MSFT 97)
[ 0.000000] ACPI: MCFG 7FFD0400, 003C (r1 A M I OEMMCFG 6000602 MSFT 97)
[ 0.000000] ACPI: OEMB 7FFDE040, 005B (r1 A M I AMI_OEM 6000602 MSFT 97)
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 38000000
[ 0.000000] low ram: 00000000 - 38000000
[ 0.000000] bootmap 00008000 - 0000f000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> [0000100000 - 00005c0a20]
[ 0.000000] #4 [0037822000 - 0037fef058] RAMDISK ==> [0037822000 - 0037fef058]
[ 0.000000] #5 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> [00005c1000 - 00005c4000]
[ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00038000
[ 0.000000] HighMem 0x00038000 -> 0x0007ffd0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007ffd0
[ 0.000000] On node 0 totalpages: 524143
[ 0.000000] free_area_init_node: node 0, pgdat c048a500, node_mem_map c1000000
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 223300 pages, LIFO batch:31
[ 0.000000] HighMem zone: 292272 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x2008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519535
[ 0.000000] Kernel command line: root=UUID=2da4a567-4b60-4391-80a0-be1885118fd3 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PMTIMER calibration value
[ 0.000000] Detected 2399.997 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 2063424k/2096960k available (2572k kernel code, 32252k reserved, 1160k data, 424k init, 1179456k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB)
[ 0.004000] .data : 0xc038329a - 0xc04a5680 (1160 kB)
[ 0.004000] .text : 0xc0100000 - 0xc038329a (2572 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.99 BogoMIPS (lpj=9599988)
[ 0.004023] Security Framework initialized
[ 0.004028] SELinux: Disabled at boot.
[ 0.004046] AppArmor: AppArmor initialized
[ 0.004053] Mount-cache hash table entries: 512
[ 0.004178] Initializing cgroup subsys ns
[ 0.004181] Initializing cgroup subsys cpuacct
[ 0.004184] Initializing cgroup subsys memory
[ 0.004195] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004197] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004199] using C1E aware idle routine
[ 0.004207] Checking 'hlt' instruction... OK.
[ 0.020301] SMP alternatives: switching to UP code
[ 0.024008] ACPI: Core revision 20080609
[ 0.025751] ACPI: Checking initramfs for custom DSDT
[ 0.309353] ENABLING IO-APIC IRQs
[ 0.309556] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.349254] CPU0: AMD Athlon(tm) 64 Processor 3800+ stepping 02
[ 0.352022] Brought up 1 CPUs
[ 0.352022] Total of 1 processors activated (4799.99 BogoMIPS).
[ 0.352022] CPU0 attaching sched-domain:
[ 0.352022] domain 0: span 0 level CPU
[ 0.352022] groups: 0
[ 0.352022] net_namespace: 840 bytes
[ 0.352022] Booting paravirtualized kernel on bare hardware
[ 0.352022] Time: 9:30:28 Date: 12/03/08
[ 0.352022] NET: Registered protocol family 16
[ 0.352022] EISA bus registered
[ 0.352022] ACPI: bus type pci registered
[ 0.352022] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.352022] PCI: Not using MMCONFIG.
[ 0.352022] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
[ 0.352022] PCI: Using configuration type 1 for base access
[ 0.352022] ACPI: EC: Look up EC in DSDT
[ 0.362771] ACPI: Interpreter enabled
[ 0.362773] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.362790] ACPI: Using IOAPIC for interrupt routing
[ 0.362843] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.369138] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.369140] PCI: Using MMCONFIG for extended config space
[ 0.379192] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.379369] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.379401] PCI: 0000:00:01.1 reg 20 io port: [2d00, 2d3f]
[ 0.379405] PCI: 0000:00:01.1 reg 24 io port: [2e00, 2e3f]
[ 0.379420] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.379426] pci 0000:00:01.1: PME# disabled
[ 0.379466] PCI: 0000:00:02.0 reg 10 32bit mmio: [fe9fb000, fe9fbfff]
[ 0.379483] pci 0000:00:02.0: supports D1
[ 0.379485] pci 0000:00:02.0: supports D2
[ 0.379486] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.379489] pci 0000:00:02.0: PME# disabled
[ 0.379504] PCI: 0000:00:02.1 reg 10 32bit mmio: [fe9fac00, fe9facff]
[ 0.379522] pci 0000:00:02.1: supports D1
[ 0.379523] pci 0000:00:02.1: supports D2
[ 0.379525] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.379528] pci 0000:00:02.1: PME# disabled
[ 0.379549] PCI: 0000:00:04.0 reg 20 io port: [ffa0, ffaf]
[ 0.379572] PCI: 0000:00:05.0 reg 10 io port: [c800, c807]
[ 0.379576] PCI: 0000:00:05.0 reg 14 io port: [c480, c483]
[ 0.379579] PCI: 0000:00:05.0 reg 18 io port: [c400, c407]
[ 0.379583] PCI: 0000:00:05.0 reg 1c io port: [c080, c083]
[ 0.379586] PCI: 0000:00:05.0 reg 20 io port: [c000, c00f]
[ 0.379590] PCI: 0000:00:05.0 reg 24 32bit mmio: [fe9f9000, fe9f9fff]
[ 0.379613] PCI: 0000:00:05.1 reg 10 io port: [bc00, bc07]
[ 0.379616] PCI: 0000:00:05.1 reg 14 io port: [b880, b883]
[ 0.379620] PCI: 0000:00:05.1 reg 18 io port: [b800, b807]
[ 0.379623] PCI: 0000:00:05.1 reg 1c io port: [b480, b483]
[ 0.379627] PCI: 0000:00:05.1 reg 20 io port: [b400, b40f]
[ 0.379630] PCI: 0000:00:05.1 reg 24 32bit mmio: [fe9f8000, fe9f8fff]
[ 0.379686] PCI: 0000:00:08.0 reg 10 32bit mmio: [fe9f7000, fe9f7fff]
[ 0.379689] PCI: 0000:00:08.0 reg 14 io port: [b080, b087]
[ 0.379693] PCI: 0000:00:08.0 reg 18 32bit mmio: [fe9fa800, fe9fa8ff]
[ 0.379697] PCI: 0000:00:08.0 reg 1c 32bit mmio: [fe9fa400, fe9fa40f]
[ 0.379712] pci 0000:00:08.0: supports D1
[ 0.379714] pci 0000:00:08.0: supports D2
[ 0.379715] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.379719] pci 0000:00:08.0: PME# disabled
[ 0.379744] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.379746] pci 0000:00:0b.0: PME# disabled
[ 0.379768] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.379770] pci 0000:00:0c.0: PME# disabled
[ 0.379792] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.379794] pci 0000:00:0d.0: PME# disabled
[ 0.379816] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.379818] pci 0000:00:0e.0: PME# disabled
[ 0.379839] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.379842] pci 0000:00:0f.0: PME# disabled
[ 0.379917] PCI: 0000:01:00.0 reg 10 io port: [d800, d8ff]
[ 0.379921] PCI: 0000:01:00.0 reg 14 32bit mmio: [feaffc00, feaffcff]
[ 0.379926] PCI: 0000:01:00.0 reg 18 32bit mmio: [feaff000, feaff7ff]
[ 0.379938] PCI: 0000:01:00.0 reg 30 32bit mmio: [feae0000, feae3fff]
[ 0.379946] pci 0000:01:00.0: supports D1
[ 0.379948] pci 0000:01:00.0: supports D2
[ 0.379949] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.379952] pci 0000:01:00.0: PME# disabled
[ 0.379977] pci 0000:00:06.0: transparent bridge
[ 0.379979] PCI: bridge 0000:00:06.0 io port: [d000, dfff]
[ 0.379982] PCI: bridge 0000:00:06.0 32bit mmio: [fea00000, feafffff]
[ 0.380125] PCI: 0000:06:00.0 reg 10 32bit mmio: [d0000000, dfffffff]
[ 0.380134] PCI: 0000:06:00.0 reg 18 64bit mmio: [febf0000, febfffff]
[ 0.380139] PCI: 0000:06:00.0 reg 20 io port: [e000, e0ff]
[ 0.380145] PCI: 0000:06:00.0 reg 30 32bit mmio: [febc0000, febdffff]
[ 0.380156] pci 0000:06:00.0: supports D1
[ 0.380157] pci 0000:06:00.0: supports D2
[ 0.380175] PCI: 0000:06:00.1 reg 10 64bit mmio: [febe0000, febeffff]
[ 0.380196] pci 0000:06:00.1: supports D1
[ 0.380197] pci 0000:06:00.1: supports D2
[ 0.380227] PCI: bridge 0000:00:0f.0 io port: [e000, efff]
[ 0.380229] PCI: bridge 0000:00:0f.0 32bit mmio: [feb00000, febfffff]
[ 0.380233] PCI: bridge 0000:00:0f.0 64bit mmio pref: [d0000000, dfffffff]
[ 0.380243] bus 00 -> node 0
[ 0.380249] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.380732] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.380993] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[ 0.381122] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[ 0.381252] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[ 0.381381] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[ 0.381511] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
[ 0.391350] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *15
[ 0.391602] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.391852] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.392139] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.392390] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 0.392641] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[ 0.392890] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.393141] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 0.393391] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15
[ 0.393642] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled.
[ 0.393892] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[ 0.394143] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
[ 0.394393] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
[ 0.394644] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 0.394894] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
[ 0.395154] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *10
[ 0.395409] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
[ 0.395710] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.395961] ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *0, disabled.
[ 0.396124] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.396151] pnp: PnP ACPI init
[ 0.396157] ACPI: bus type pnp registered
[ 0.401439] pnp: PnP ACPI: found 11 devices
[ 0.401441] ACPI: ACPI bus type pnp unregistered
[ 0.401444] PnPBIOS: Disabled by ACPI PNP
[ 0.401726] PCI: Using ACPI for IRQ routing
[ 0.401815] NET: Registered protocol family 8
[ 0.401815] NET: Registered protocol family 20
[ 0.401815] NetLabel: Initializing
[ 0.401815] NetLabel: domain hash size = 128
[ 0.401815] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.401815] NetLabel: unlabeled traffic allowed by default
[ 0.401815] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.401815] actual entries 65620
[ 0.401815] AppArmor: AppArmor Filesystem Enabled
[ 0.401815] ACPI: RTC can wake from S4
[ 0.401815] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 0.401815] system 00:05: ioport range 0x800-0x80f has been reserved
[ 0.401815] system 00:05: ioport range 0x2000-0x207f has been reserved
[ 0.401815] system 00:05: ioport range 0x2080-0x20ff has been reserved
[ 0.401815] system 00:05: ioport range 0x2400-0x247f has been reserved
[ 0.401815] system 00:05: ioport range 0x2480-0x24ff has been reserved
[ 0.401815] system 00:05: ioport range 0x2800-0x287f has been reserved
[ 0.401815] system 00:05: ioport range 0x2880-0x28ff has been reserved
[ 0.401815] system 00:05: ioport range 0x2c00-0x2c7f has been reserved
[ 0.401815] system 00:05: ioport range 0x2c80-0x2cff has been reserved
[ 0.401815] system 00:05: iomem range 0xfe980000-0xfe9bffff has been reserved
[ 0.401815] system 00:05: iomem range 0xfee01000-0xfeefffff could not be reserved
[ 0.401815] system 00:06: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.401815] system 00:06: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.401815] system 00:08: ioport range 0xa00-0xa0f has been reserved
[ 0.401815] system 00:08: ioport range 0xa10-0xa1f has been reserved
[ 0.401815] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.401815] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 0.401815] system 00:0a: iomem range 0xc0000-0xcffff could not be reserved
[ 0.401815] system 00:0a: iomem range 0xe0000-0xfffff could not be reserved
[ 0.401815] system 00:0a: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.401815] system 00:0a: iomem range 0xff780000-0xffffffff could not be reserved
[ 0.437497] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
[ 0.437500] pci 0000:00:06.0: IO window: 0xd000-0xdfff
[ 0.437503] pci 0000:00:06.0: MEM window: 0xfea00000-0xfeafffff
[ 0.437506] pci 0000:00:06.0: PREFETCH window: 0x00000088000000-0x000000880fffff
[ 0.437510] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
[ 0.437512] pci 0000:00:0b.0: IO window: disabled
[ 0.437514] pci 0000:00:0b.0: MEM window: disabled
[ 0.437516] pci 0000:00:0b.0: PREFETCH window: disabled
[ 0.437520] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
[ 0.437521] pci 0000:00:0c.0: IO window: disabled
[ 0.437524] pci 0000:00:0c.0: MEM window: disabled
[ 0.437526] pci 0000:00:0c.0: PREFETCH window: disabled
[ 0.437529] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04
[ 0.437531] pci 0000:00:0d.0: IO window: disabled
[ 0.437533] pci 0000:00:0d.0: MEM window: disabled
[ 0.437536] pci 0000:00:0d.0: PREFETCH window: disabled
[ 0.437539] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05
[ 0.437541] pci 0000:00:0e.0: IO window: disabled
[ 0.437543] pci 0000:00:0e.0: MEM window: disabled
[ 0.437545] pci 0000:00:0e.0: PREFETCH window: disabled
[ 0.437549] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:06
[ 0.437551] pci 0000:00:0f.0: IO window: 0xe000-0xefff
[ 0.437554] pci 0000:00:0f.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.437557] pci 0000:00:0f.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.437565] pci 0000:00:06.0: setting latency timer to 64
[ 0.437569] pci 0000:00:0b.0: setting latency timer to 64
[ 0.437573] pci 0000:00:0c.0: setting latency timer to 64
[ 0.437577] pci 0000:00:0d.0: setting latency timer to 64
[ 0.437581] pci 0000:00:0e.0: setting latency timer to 64
[ 0.437585] pci 0000:00:0f.0: setting latency timer to 64
[ 0.437588] bus: 00 index 0 io port: [0, ffff]
[ 0.437590] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.437592] bus: 01 index 0 io port: [d000, dfff]
[ 0.437594] bus: 01 index 1 mmio: [fea00000, feafffff]
[ 0.437596] bus: 01 index 2 mmio: [88000000, 880fffff]
[ 0.437598] bus: 01 index 3 io port: [0, ffff]
[ 0.437599] bus: 01 index 4 mmio: [0, ffffffff]
[ 0.437601] bus: 02 index 0 mmio: [0, 0]
[ 0.437603] bus: 02 index 1 mmio: [0, 0]
[ 0.437604] bus: 02 index 2 mmio: [0, 0]
[ 0.437606] bus: 02 index 3 mmio: [0, 0]
[ 0.437608] bus: 03 index 0 mmio: [0, 0]
[ 0.437609] bus: 03 index 1 mmio: [0, 0]
[ 0.437611] bus: 03 index 2 mmio: [0, 0]
[ 0.437613] bus: 03 index 3 mmio: [0, 0]
[ 0.437614] bus: 04 index 0 mmio: [0, 0]
[ 0.437616] bus: 04 index 1 mmio: [0, 0]
[ 0.437617] bus: 04 index 2 mmio: [0, 0]
[ 0.437619] bus: 04 index 3 mmio: [0, 0]
[ 0.437621] bus: 05 index 0 mmio: [0, 0]
[ 0.437622] bus: 05 index 1 mmio: [0, 0]
[ 0.437624] bus: 05 index 2 mmio: [0, 0]
[ 0.437626] bus: 05 index 3 mmio: [0, 0]
[ 0.437627] bus: 06 index 0 io port: [e000, efff]
[ 0.437629] bus: 06 index 1 mmio: [feb00000, febfffff]
[ 0.437631] bus: 06 index 2 mmio: [d0000000, dfffffff]
[ 0.437633] bus: 06 index 3 mmio: [0, 0]
[ 0.437642] NET: Registered protocol family 2
[ 0.437666] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.437666] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.437666] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.437666] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.437666] TCP reno registered
[ 0.437666] NET: Registered protocol family 1
[ 0.437666] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 0.717760] it is
[ 1.019390] Freeing initrd memory: 7988k freed
[ 1.020102] audit: initializing netlink socket (disabled)
[ 1.020113] type=2000 audit(1228296628.020:1): initialized
[ 1.025165] highmem bounce pool size: 64 pages
[ 1.025169] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.027331] VFS: Disk quotas dquot_6.5.1
[ 1.027418] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.027510] msgmni has been set to 1743
[ 1.027610] io scheduler noop registered
[ 1.027613] io scheduler anticipatory registered
[ 1.027614] io scheduler deadline registered
[ 1.027623] io scheduler cfq registered (default)
[ 1.552060] pci 0000:00:05.0: Enabling HT MSI Mapping
[ 1.552075] pci 0000:00:05.1: Enabling HT MSI Mapping
[ 1.552088] pci 0000:00:06.0: Enabling HT MSI Mapping
[ 1.552104] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 1.552119] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 1.552133] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 1.552148] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 1.552163] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 1.552178] pci 0000:00:0f.0: Enabling HT MSI Mapping
[ 1.552186] pci 0000:06:00.0: Boot video device
[ 1.552275] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[ 1.552296] pcieport-driver 0000:00:0b.0: found MSI capability
[ 1.552313] pci_express 0000:00:0b.0:pcie00: allocate port service
[ 1.552356] pci_express 0000:00:0b.0:pcie03: allocate port service
[ 1.552419] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 1.552439] pcieport-driver 0000:00:0c.0: found MSI capability
[ 1.552455] pci_express 0000:00:0c.0:pcie00: allocate port service
[ 1.552492] pci_express 0000:00:0c.0:pcie03: allocate port service
[ 1.552554] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[ 1.552575] pcieport-driver 0000:00:0d.0: found MSI capability
[ 1.552590] pci_express 0000:00:0d.0:pcie00: allocate port service
[ 1.552628] pci_express 0000:00:0d.0:pcie03: allocate port service
[ 1.552689] pcieport-driver 0000:00:0e.0: setting latency timer to 64
[ 1.552710] pcieport-driver 0000:00:0e.0: found MSI capability
[ 1.552725] pci_express 0000:00:0e.0:pcie00: allocate port service
[ 1.552763] pci_express 0000:00:0e.0:pcie03: allocate port service
[ 1.552825] pcieport-driver 0000:00:0f.0: setting latency timer to 64
[ 1.552846] pcieport-driver 0000:00:0f.0: found MSI capability
[ 1.552862] pci_express 0000:00:0f.0:pcie00: allocate port service
[ 1.552900] pci_express 0000:00:0f.0:pcie03: allocate port service
[ 1.553177] isapnp: Scanning for PnP cards...
[ 1.905537] isapnp: No Plug & Play device found
[ 1.938259] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.940214] brd: module loaded
[ 1.940281] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.940382] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.940384] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.940860] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.941338] mice: PS/2 mouse device common for all mice
[ 1.941473] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.941499] rtc0: alarms up to one year, y3k
[ 1.941614] EISA: Probing bus 0 at eisa.0
[ 1.941620] Cannot allocate resource for EISA slot 2
[ 1.941633] EISA: Detected 0 cards.
[ 1.941636] cpuidle: using governor ladder
[ 1.941638] cpuidle: using governor menu
[ 1.942030] TCP cubic registered
[ 1.942050] Using IPI No-Shortcut mode
[ 1.942220] registered taskstats version 1
[ 1.942324] Magic number: 4:691:524
[ 1.942470] rtc_cmos 00:02: setting system clock to 2008-12-03 09:30:29 UTC (1228296629)
[ 1.942473] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.942474] EDD information not available.
[ 1.942686] Freeing unused kernel memory: 424k freed
[ 1.942735] Write protecting the kernel text: 2576k
[ 1.942765] Write protecting the kernel read-only data: 936k
[ 1.967105] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 2.114214] fuse init (API version 7.9)
[ 2.312055] processor ACPI0007:00: registered as cooling_device0
[ 2.820580] usbcore: registered new interface driver usbfs
[ 2.820598] usbcore: registered new interface driver hub
[ 2.829711] No dock devices found.
[ 2.850080] usbcore: registered new device driver usb
[ 2.875281] SCSI subsystem initialized
[ 2.875716] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
[ 2.875726] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
[ 2.875735] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 2.875737] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 2.875775] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 2.875796] ehci_hcd 0000:00:02.1: debug port 1
[ 2.875799] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 2.875812] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfe9fac00
[ 2.877454] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.890691] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.890824] usb usb1: configuration #1 chosen from 1 choice
[ 2.890849] hub 1-0:1.0: USB hub found
[ 2.890857] hub 1-0:1.0: 10 ports detected
[ 2.902242] libata version 3.00 loaded.
[ 3.096694] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
[ 3.096704] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 22 (level, low) -> IRQ 22
[ 3.096715] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 3.096718] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 3.096737] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 3.096758] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfe9fb000
[ 3.154185] usb usb2: configuration #1 chosen from 1 choice
[ 3.154208] hub 2-0:1.0: USB hub found
[ 3.154217] hub 2-0:1.0: 10 ports detected
[ 3.360365] pata_acpi 0000:00:04.0: setting latency timer to 64
[ 3.360418] sata_nv 0000:00:05.0: version 3.5
[ 3.360777] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[ 3.360786] sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 21 (level, low) -> IRQ 21
[ 3.360789] sata_nv 0000:00:05.0: Using SWNCQ mode
[ 3.360810] sata_nv 0000:00:05.0: setting latency timer to 64
[ 3.360963] scsi0 : sata_nv
[ 3.361055] scsi1 : sata_nv
[ 3.364857] ata1: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc000 irq 21
[ 3.364860] ata2: SATA max UDMA/133 cmd 0xc400 ctl 0xc080 bmdma 0xc008 irq 21
[ 3.536024] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 3.749366] usb 2-1: configuration #1 chosen from 1 choice
[ 3.840048] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.848225] ata1.00: ATA-7: WDC WD1200JS-00MHB0, 02.01C03, max UDMA/133
[ 3.848228] ata1.00: 234441648 sectors, multi 16: LBA48
[ 3.856221] ata1.00: configured for UDMA/133
[ 4.186233] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.186339] scsi 0:0:0:0: Direct-Access ATA WDC WD1200JS-00M 02.0 PQ: 0 ANSI: 5
[ 4.186796] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
[ 4.186805] sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 20 (level, low) -> IRQ 20
[ 4.186808] sata_nv 0000:00:05.1: Using SWNCQ mode
[ 4.186843] sata_nv 0000:00:05.1: setting latency timer to 64
[ 4.187349] scsi2 : sata_nv
[ 4.187646] scsi3 : sata_nv
[ 4.188905] ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 20
[ 4.188908] ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 20
[ 4.518234] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.846232] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.846289] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 4.846635] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
[ 4.846639] forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
[ 4.846643] forcedeth 0000:00:08.0: setting latency timer to 64
[ 4.846666] nv_probe: set workaround bit for reversed mac addr
[ 5.365751] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x1c1 @ 1, addr 00:16:17:95:df:de
[ 5.365755] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 5.376212] pata_amd 0000:00:04.0: version 0.3.10
[ 5.376248] pata_amd 0000:00:04.0: setting latency timer to 64
[ 5.378664] scsi4 : pata_amd
[ 5.379146] scsi5 : pata_amd
[ 5.381433] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 5.381435] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 5.407962] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.433795] usbcore: registered new interface driver hiddev
[ 5.441308] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input2
[ 5.441987] Driver 'sd' needs updating - please use bus_type methods
[ 5.442087] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 5.442111] sd 0:0:0:0: [sda] Write Protect is off
[ 5.442113] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.442154] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.442227] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 5.442249] sd 0:0:0:0: [sda] Write Protect is off
[ 5.442252] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.442292] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.442296] sda:<6>input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-1
[ 5.444203] usbcore: registered new interface driver usbhid
[ 5.444206] usbhid: v2.6:USB HID core driver
[ 5.462290] sda1 sda2 < sda5 >
[ 5.486106] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.568258] ata5.01: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33
[ 5.568271] ata5: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc00000) ACPI=0x701f (900:60:0x14)
[ 5.584194] ata5.01: configured for UDMA/33
[ 5.584221] ata6: port disabled. ignoring.
[ 5.602222] scsi 4:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5
[ 5.602354] scsi 4:0:1:0: Attached scsi generic sg1 type 5
[ 5.634730] Driver 'sr' needs updating - please use bus_type methods
[ 5.663368] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
[ 5.663373] Uniform CD-ROM driver Revision: 3.20
[ 5.663455] sr 4:0:1:0: Attached scsi CD-ROM sr0
[ 9.465165] PM: Starting manual resume from disk
[ 9.465168] PM: Resume from partition 8:5
[ 9.465170] PM: Checking hibernation image.
[ 9.465316] PM: Resume from disk failed.
[ 9.507071] kjournald starting. Commit interval 5 seconds
[ 9.507083] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.201759] udevd version 124 started
[ 14.844337] ck804xrom ck804xrom_init_one(): Unable to register resource 0x00000000ff000000-0x00000000ffffffff - kernel bug?
[ 14.994290] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00
[ 14.994323] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00
[ 15.037412] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 15.048049] ACPI: Power Button (FF) [PWRF]
[ 15.048203] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 15.064034] ACPI: Power Button (CM) [PWRB]
[ 16.351018] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 16.390116] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.456684] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
[ 16.456695] olympic 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19
[ 16.456707] Olympic.c v1.0.5 6/04/02 - Peter De Schrijver & Mike Phillips
[ 16.456710] 0000:01:00.0. I/O at d800, MMIO at f8834c00, LAP at f88da000, using irq 19
[ 17.012790] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 21.905100] Olympic: 0000:01:00.0 registered as: tr0
[ 23.265678] lp: driver loaded but no devices found
[ 23.451231] Adding 4803392k swap on /dev/sda5. Priority:-1 extents:1 across:4803392k
[ 23.989914] EXT3 FS on sda1, internal journal
[ 24.899200] type=1505 audit(1228296652.773:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=3783
[ 25.060541] type=1505 audit(1228296652.937:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=3788
[ 25.060725] type=1505 audit(1228296652.937:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=3788
[ 25.187450] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 25.671752] ACPI: WMI: Mapper loaded
[ 25.937851] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3800+ processors (1 cpu cores) (version 2.20.00)
[ 25.940239] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[ 26.503653] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 26.564899] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 26.564906] apm: overridden by ACPI.
[ 26.708687] ppdev: user-space parallel port driver
[ 28.413205] Bluetooth: Core ver 2.13
[ 28.414945] NET: Registered protocol family 31
[ 28.414951] Bluetooth: HCI device and connection manager initialized
[ 28.414954] Bluetooth: HCI socket layer initialized
[ 28.428314] Bluetooth: L2CAP ver 2.11
[ 28.428321] Bluetooth: L2CAP socket layer initialized
[ 28.438349] Bluetooth: SCO (Voice Link) ver 0.6
[ 28.438356] Bluetooth: SCO socket layer initialized
[ 28.458081] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 28.458087] Bluetooth: BNEP filters: protocol multicast
[ 28.473352] Bluetooth: RFCOMM socket layer initialized
[ 28.473586] Bluetooth: RFCOMM TTY layer initialized
[ 28.473592] Bluetooth: RFCOMM ver 1.10
[ 28.527798] Bridge firewalling registered
[ 28.528776] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 30.101338] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 18
[ 30.101355] pci 0000:06:00.0: PCI INT A -> Link[LNEB] -> GSI 18 (level, low) -> IRQ 18
[ 30.273940] Linux agpgart interface v0.103
[ 30.292628] [drm] Initialized drm 1.1.0 20060810
[ 30.314246] pci 0000:06:00.0: setting latency timer to 64
[ 30.315333] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 30.628431] [drm] Setting GART location based on new memory map
[ 30.628868] [drm] Loading R500 Microcode
[ 30.629109] [drm] Num pipes: 1
[ 30.629118] [drm] writeback test succeeded in 1 usecs
[ 32.572825] eth0: no link during initialization.
[ 49.482440] UDF-fs: No VRS found
[ 49.494444] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 49.588692] ISO 9660 Extensions: RRIP_1991A
[ 122.109240] type=1503 audit(1228296749.985:5): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/5188/net/" pid=5188 profile="/usr/sbin/cupsd"
[ 122.176489] NET: Registered protocol family 10
[ 122.177882] lo: Disabled Privacy Extensions
[ 122.179204] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 122.180819] type=1503 audit(1228296750.057:6): operation="socket_create" family="ax25" sock_type="dgram" protocol=0 pid=5188 profile="/usr/sbin/cupsd"
[ 122.180833] type=1503 audit(1228296750.057:7): operation="socket_create" family="netrom" sock_type="seqpacket" protocol=0 pid=5188 profile="/usr/sbin/cupsd"
[ 122.180839] type=1503 audit(1228296750.057:8): operation="socket_create" family="rose" sock_type="dgram" protocol=0 pid=5188 profile="/usr/sbin/cupsd"
[ 122.180844] type=1503 audit(1228296750.057:9): operation="socket_create" family="ipx" sock_type="dgram" protocol=0 pid=5188 profile="/usr/sbin/cupsd"
[ 122.180850] type=1503 audit(1228296750.057:10): operation="socket_create" family="appletalk" sock_type="dgram" protocol=0 pid=5188 profile="/usr/sbin/cupsd"
[ 122.180856] type=1503 audit(1228296750.057:11): operation="socket_create" family="econet" sock_type="dgram" protocol=0 pid=5188 profile="/usr/sbin/cupsd"
[ 122.180861] type=1503 audit(1228296750.057:12): operation="socket_create" family="ash" sock_type="dgram" protocol=0 pid=5188 profile="/usr/sbin/cupsd"
[ 122.180867] type=1503 audit(1228296750.057:13): operation="socket_create" family="x25" sock_type="seqpacket" protocol=0 pid=5188 profile="/usr/sbin/cupsd"
[ 122.180916] type=1503 audit(1228296750.057:14): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=7 name="/proc/5188/net/dev" pid=5188 profile="/usr/sbin/cupsd"
[ 437.077158] eth0: link up.
[ 437.077528] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 447.348015] eth0: no IPv6 routers present
[ 965.576759] Olympic.c v1.0.5 6/04/02 - Peter De Schrijver & Mike Phillips
[ 965.576772] 0000:01:00.0. I/O at d800, MMIO at f8834c00, LAP at f88da000, using irq 19
[ 989.194827] tr0: SRB timed out.
[ 989.194836] tr0: Retrying at different ring speed
[ 1007.356853] tr0: SRB timed out.
[ 1007.356864] tr0: Lobe Media Test - Function Failure
[ 1270.542926] Olympic.c v1.0.5 6/04/02 - Peter De Schrijver & Mike Phillips
[ 1270.542938] 0000:01:00.0. I/O at d800, MMIO at f8834c00, LAP at f88da000, using irq 19
[ 1294.160996] tr0: SRB timed out.
[ 1294.161005] tr0: Retrying at different ring speed
[ 1312.323025] tr0: SRB timed out.
[ 1312.323035] tr0: Lobe Media Test - Function Failure
[ 1312.329468] Olympic.c v1.0.5 6/04/02 - Peter De Schrijver & Mike Phillips
[ 1312.329477] 0000:01:00.0. I/O at d800, MMIO at f8834c00, LAP at f88da000, using irq 19
[ 1335.947534] tr0: SRB timed out.
[ 1335.947543] tr0: Retrying at different ring speed
[ 1354.109561] tr0: SRB timed out.
[ 1354.109570] tr0: Lobe Media Test - Function Failure
[ 1354.111043] Olympic.c v1.0.5 6/04/02 - Peter De Schrijver & Mike Phillips
[ 1354.111049] 0000:01:00.0. I/O at d800, MMIO at f8834c00, LAP at f88da000, using irq 19
[ 1377.729106] tr0: SRB timed out.
[ 1377.729115] tr0: Retrying at different ring speed
[ 1395.891135] tr0: SRB timed out.
[ 1395.891144] tr0: Lobe Media Test - Function Failure
[ 2042.656390] Olympic.c v1.0.5 6/04/02 - Peter De Schrijver & Mike Phillips
[ 2042.656402] 0000:01:00.0. I/O at d800, MMIO at f8834c00, LAP at f88da000, using irq 19
[ 2074.029364] tr0: SRB timed out.
[ 2074.029372] tr0: Retrying at different ring speed
[ 2099.951666] tr0: SRB timed out.
[ 2099.951675] tr0: Tried to autosense ring speed with no monitors present
[ 2099.951677] tr0: Please try again with a specified ring speed
[ 2160.097832] Olympic.c v1.0.5 6/04/02 - Peter De Schrijver & Mike Phillips
[ 2160.097846] 0000:01:00.0. I/O at d800, MMIO at f8834c00, LAP at f88da000, using irq 19
[ 2186.630451] tr0: SRB timed out.
[ 2186.630459] tr0: Retrying at different ring speed
[ 2207.712400] tr0: SRB timed out.
[ 2207.712410] tr0: Tried to autosense ring speed with no monitors present
[ 2207.712412] tr0: Please try again with a specified ring speed
[ 2229.796624] Olympic.c v1.0.5 6/04/02 - Peter De Schrijver & Mike Phillips
[ 2229.796637] 0000:01:00.0. I/O at d800, MMIO at f8834c00, LAP at f88da000, using irq 19
[ 2261.169606] tr0: SRB timed out.
[ 2261.169615] tr0: Retrying at different ring speed
[ 2282.251549] tr0: SRB timed out.
[ 2282.251559] tr0: Tried to autosense ring speed with no monitors present
[ 2282.251561] tr0: Please try again with a specified ring speed

[Popopinsel]

Und hier ist ein Auszug aus den Nachrichten des Systemprotokolls, welche nach dem Ausführen von "ifconfig tr0 up" erscheinen:

Dec 3 11:50:18 popopinsel-desktop kernel: [ 4790.610510] Olympic.c v1.0.5 6/04/02 - Peter De Schrijver & Mike Phillips
Dec 3 11:50:18 popopinsel-desktop kernel: [ 4790.610525] 0000:01:00.0. I/O at d800, MMIO at f8834c00, LAP at f88da000, using irq 19
Dec 3 11:50:45 popopinsel-desktop kernel: [ 4817.143133] tr0: SRB timed out.
Dec 3 11:50:45 popopinsel-desktop kernel: [ 4817.143142] tr0: Retrying at different ring speed
Dec 3 11:51:06 popopinsel-desktop kernel: [ 4838.225085] tr0: SRB timed out.
Dec 3 11:51:06 popopinsel-desktop kernel: [ 4838.225094] tr0: Tried to autosense ring speed with no monitors present
Dec 3 11:51:06 popopinsel-desktop kernel: [ 4838.225096] tr0: Please try again with a specified ring speed


Ich hoffe, irgendwer kann mir helfen...

[Popopinsel]

Erfolgserlebnis! Ich bin jetzt hingegangen und hab die Datei /etc/modprobe.d/options editiert und folgende Zeile eingefügt:

# IBM TokenRing Adapter 2 WOL
options olympic ringspeed=16

Dann noch am Ende in der /etc/modprobe.d/aliases:

alias tr0 olympic

Werd das ganze jetzt mal unter Debian wiederholen, aber das sollte ja klappen.

[piepre]

Du hast also die Meldung: "tr0: Please try again with a specified ring speed" richtig interpretiert :)