PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Philips Surroundsystem - Menü deaktiviert


Qui
2009-05-30, 14:09:34
Servus,

habe gestern das bestellte Philips System HTS 9810/12 erhalten und aufgebaut. Nach ein paar Spielereien wollte ich gern ne amerikanische DVD gucken, nur leider ruckelte dieses (klar, aufm PAL System...).

Also wollte ich ins Menü, wo ich laut Handbuch auch den TV-Typ umstellen kann (auf PAL, NTSC oder MULTi).

Nur leider ist dieser Menüpunkt ausgegraut, da steht nur "Menü deaktiviert". Ich habe keine Möglichkeit gefunden diesen Punkt zu aktivieren.

Nun isses nen bissel doof, weil bestimmt keiner hier nen Philips System zu Hause hat, aber vielleicht hat ja jemand Ahnung wie ich den Punkt wieder aktiviert kriege.

Email an Philips ist schon raus.

Danke.

Gruß

Qui

Qui
2009-05-30, 14:22:59
Habe was bei Amazon gefunden dazu.:

If you own a multi-system television (or a PAL television), you should be aware that all current USA Philips DVD players (including the 5982 and any models made thereafter) have the "TV Type" selections disabled in the firmware. The ONLY choice of output system (for U.S. machines) is NTSC, which is fine for most people, but if you have a multi-system TV, this means your PAL discs are going to undergo an unnecessary standards conversion (to NTSC).

All other worldwide versions of Philips machines still have NTSC, PAL and MULTI as choices in the "TV Type" menu. Why was it removed for the USA? My guess was to end calls to customer service for people complaining about black-and-white pictures (MULTI used to be the default choice back when US machines included all three types).

The 5960 is the last US model of this type/price point (including a USB port) to come with changeable TV type options, FYI.

I HAVE DISCOVERED A WORK-AROUND, however. You can change the player to multi-system by the following process:

1. open the tray
2. press "3" on the remote. The word "MULTI" should appear in the upper corner of the screen. Now, all NTSC discs will be output as NTSC, and all PAL discs will be output as PAL.

This process does NOT restore the TV type choices to the menu system, though (would take a firmware change to do that). However, if you wish to revert to "NTSC-only" output, simply go back through the menu system, go to TV Type and reselect "NTSC".

Das ist jetzt nicht für mein Modell, es ist aber das gleiche Problem. Leider klappt die Anleitung mit Drücken der Taste 3 nicht bei mir :-(

Qui
2009-05-30, 21:38:00
Der Philips-Support hat mir per Email geantwortet und mir leider nur eine Anleitung zum Zurücksetzen der Werkseinstellungen gegeben, was nicht das Problem beseitigte.

Ich habe zurückgeschrieben und hoffe auf eine weitere Antwort :redface:

Qui
2009-06-04, 13:31:40
Philips hat mich heute angerufen (es war eine sehr nette Frau) und hat mir gesagt, ich solle doch das System per Scart-Kabel verkabeln.

Das Scartkabel kommt nicht direkt an den DVD Player sondern vom Fernseher an einen Converter (da gehen alle Kabel rein) und aufeinmal konnte ich im Scart-Modus auf das Menü zugreifen :eek: :eek: :eek:

Ich freue mich, dass das endlich geklärt ist ;D