PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Blu-Ray Brenner defekt?

Blade II
2009-07-09, 23:58:24
Moin,

der BR-Brenner eines Bekannten will absolut keine Bluray-Discs brennen. Das Teil ist jetzt ca. nen halbes Jahr alt und hat bislang noch keine BRDs gebrannt. Beim Brennvorgang hört er nach ca. 3mb auf zu schreiben und bricht mit einer Fehlermeldung ab.
Das gleiche Fehlerschema zeigt sich wenn ich das Laufwerk in meinen PC einbaue. Ist der BR-Laser hinüber? CDs/DVDs soll er ohne Probleme brennen können. Dummerweise habe ich nur eine BR-RW hier rumliegen. Gibt es eine Möglichkeit herauszufinden, was den Fehler verursacht?

Unter Umständen sagt euch der Log ja etwas:




Windows Vista 6.1
AMD64
Wow64Process
WinAspi: -

NT-SPTI used
Nero Version: 9.4.13.100
Internal Version: 9, 4, 13, 100

Recorder: <HL-DT-ST BD-RE GGW-H20L>Version: YL03 - HA 1 TA 3 - 9.4.13.100
Adapter driver: <Serial ATA> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data
CD-ROM: <FOV 5MJSLEVGH >Version: 1.03 - HA 1 TA 1 - 9.4.13.100
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : FOV 5MJSLEVGH 1.03 avgdaepm Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
FOV 5MJSLEVGH V: CdRom1
HL-DT-ST BD-RE GGW-H20L E: CdRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 4095MB (4193332kB)
Free physical memory: 2688MB (2753520kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)

9.7.2009
UDF Zusammenstellung
23:37:15 #1 Text 0 File SCSIPTICommands.cpp, Line 430
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

23:37:15 #2 Text 0 File Isodoc.cpp, Line 6998
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical

23:37:16 #3 Text 0 File Burncd.cpp, Line 3572
Turn on Disc-At-Once, using Blu-ray Disc media

23:37:17 #4 Text 0 File DlgWaitCD.cpp, Line 313
Last possible write address on media: 11826175
Last address to be written: 39583

23:37:17 #5 Text 0 File DlgWaitCD.cpp, Line 325
Write in overburning mode: NO (enabled: CD)

23:37:17 #6 Text 0 File DlgWaitCD.cpp, Line 2843
Recorder: HL-DT-ST BD-RE GGW-H20L, Media type: BD-RE

23:37:17 #7 Text 0 File DlgWaitCD.cpp, Line 500
>>> Protocol of DlgWaitCD activities: <<<
=========================================

23:37:17 #8 Text 0 File ThreadedTransferInterface.cpp, Line 739
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 39264 (39264) = #39264/8:43.39
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 39264 blocks [E: HL-DT-ST BD-RE GGW-H20L]
1: TRM_DATA_MODE1 ()
2 indices, index0 (0) not provided
original disc pos #0 + 320 (320) = #320/0:4.20
relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 320 blocks [E: HL-DT-ST BD-RE GGW-H20L]
--------------------------------------------------------------

23:37:17 #9 Text 0 File ThreadedTransferInterface.cpp, Line 941
Prepare [E: HL-DT-ST BD-RE GGW-H20L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 2: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 80412672, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 80412672 80412672 81068032, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 39264 | 0 | 0x00
39264 | 2 | 0 | 0x41 | 0 | 0 | 0x00
39264 | 2 | 1 | 0x41 | 320 | 39264 | 0x00
39584 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

23:37:17 #10 Text 0 File SCSIPTICommands.cpp, Line 217
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

23:37:17 #11 Text 0 File Burncd.cpp, Line 4279
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

23:37:17 #12 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

23:37:17 #13 Text 0 File Burncd.cpp, Line 4401
Cache writing successful.

23:37:17 #14 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

23:37:17 #15 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 2x (8.990 KB/s)

23:37:17 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2695
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

23:37:17 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2695
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #11825856

23:37:17 #18 Text 0 File Cdrdrv.cpp, Line 10168
---- Disc Structure (BD): Disc Information on BD (00h) ----
Media Type: 1, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 4098
--- Header ---
Disc Information Identifier: <DI>
Disc Information Format: 01 h
Number of DI Units/Aux Frames in each DI block: 2
Number of (recording) layer to which this DI Unit applies: 0
DI unit Sequence Number in DI Block: 0
Continuation flag: Next DI Unit is the start of a new set of parameters (0)
Number of DI bytes in use in this DI unit: 99
--- Body ---
Disc Type Identifier: <BDW>
Disc Size/Class/Version: 2
DI Unit Format dependent contents:
BD Structure: 20 (14 h):
1 recording layer (SL), BD-RE
Hybrid Disc identifier/Channel bit length: 1 (1 h):
no DVD layer present, no CD layer present
channel bit length of 74,5 nm (25.0 GB max. per layer)
Push-Pull polarity flag bits: 00 h
BCA descriptor: BCA-code present (1)
Maximum transfer ra

23:37:17 #19 Text 0 File BD.cpp, Line 392
BD: Start write address at LBA 0, Recording mode: unknown Recording Mode (0),
spare area allocation: default (no action) (0), Stream recording: NO (0); return code 0

23:37:17 #20 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

23:37:17 #21 Text 0 File CUDFTransferItem2.cpp, Line 689

GenUDF2 FS Layout:
=-=-=-=-=-=-=-=-=-=-
Sectors to be written: 39584
Session Start: Sector 0
Volume Structure: Sector [0, 256] (257 Sectors)
Meta Data: Sector [257, 275] (19 Sectors)
Data: Sector [276, 39244] (38969 Sectors)
After Data: Sector [39245, 39263] (19 Sectors)
Trailer Track: Sector [11825856, 11826175] (320 Sectors)

GenUDF2 Parameters:
=-=-=-=-=-=-=-=-=-=-
PrepTime: 07-09-2009 23:37:16
UDF Revision: 1.02
UDF Partition Type: Physical
UDF Special Mode: None
Bytes per Sector: 2048
Session Start: 0
Physical Partition Start: -1
Total Capacity: 11826176
Multi Session Mode: None
Disc Type: BD-RE
OS Class: 0
Volume ID: Neu
Allow Unicode Labels: 0
Duplicate Meta Data: 1
MS Info File: 00000000
VMS Rollback File: 00000000
Create ISO bridge: 0
ECC Block Length: 32
Sparing Packet Length: 32
Allocation Unit Size: 32
Alignment Unit Size: 32
Make Writable: 0
Access Type: Read-only

23:38:39 #22 SPTI -1135 File SCSIPassThrough.cpp, Line 215
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1135)
CDB Data: 0x2A 00 00 00 09 80 00 00 20 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x02
Sense Area: 0x70 00 03 00 00 00 00 0A 36 20 03 B0 0C 02
Buffer x19571340: Len x10000
0xB8 A4 82 DA FF FB A0 60 21 8C F6 30 67 4F 13 99
0x62 F2 52 A4 59 D1 65 E9 3E 13 59 7F 46 6D BC CD
0xC0 A3 8E 29 00 F6 20 A0 60 CA 13 EE 45 A8 C3 9A

23:38:39 #23 CDR -1135 File Writer.cpp, Line 306
Write error
E: HL-DT-ST BD-RE GGW-H20L

23:38:39 #24 SPTI -1135 File SCSIPassThrough.cpp, Line 215
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1135)
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x02
Sense Area: 0x71 00 03 00 00 00 00 0A 36 20 03 B0 0C 02

23:38:39 #25 CDR -1135 File WriterStatus.cpp, Line 292
Write error
E: HL-DT-ST BD-RE GGW-H20L

23:38:39 #26 TRANSFER -24 File WriterStatus.cpp, Line 292
Could not perform end of Disc-at-once

23:38:39 #27 Text 0 File DVDPlusDualLayer.cpp, Line 1452
SetDriveCaps: Set LAST LBA of layer 1 to 0

23:38:39 #28 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 2x (8.990 KB/s)

23:38:39 #29 Text 0 File SCSIPTICommands.cpp, Line 267
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

23:38:43 #30 Text 0 File Cdrdrv.cpp, Line 11478
DriveLocker: UnLockVolume completed

23:38:43 #31 Text 0 File SCSIPTICommands.cpp, Line 430
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon


Viele Grüße,
Blade II
KinGGoliAth
2009-07-10, 00:40:59
schon nach firmwareupdate gesucht?
Blade II
2009-07-10, 10:30:06
FW-Update habe ich gerade erfolgreich von YL03 auf YL05 ausgeführt. Der Fehler bleibt aber der Gleiche.
YL05
- Write strategy improvement for new BD-R and BD-RE Media
(BD-R : 24kinds, BD-RE : 4kinds)

YL04
- Addition of write strategy

YL03
- Improved writing quality

YL02
- Improved writing quality


Nero Log nach Firmware-Update:



Windows Vista 6.1
AMD64
Wow64Process
WinAspi: -

NT-SPTI used
Nero Version: 9.4.13.100
Internal Version: 9, 4, 13, 100

Recorder: <HL-DT-ST BD-RE GGW-H20L>Version: YL05 - HA 1 TA 3 - 9.4.13.100
Adapter driver: <Serial ATA> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data
CD-ROM: <FOV 5MJSLEVGH >Version: 1.03 - HA 1 TA 1 - 9.4.13.100
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : FOV 5MJSLEVGH 1.03 a1jtv1le Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
FOV 5MJSLEVGH V: CdRom1
HL-DT-ST BD-RE GGW-H20L E: CdRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 4095MB (4193332kB)
Free physical memory: 2996MB (3068220kB)
Memory in use : 26 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.7.2009
UDF Zusammenstellung
10:21:39 #1 Text 0 File SCSIPTICommands.cpp, Line 430
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

10:21:39 #2 Text 0 File Isodoc.cpp, Line 6998
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical

10:21:39 #3 Text 0 File Burncd.cpp, Line 3572
Turn on Disc-At-Once, using Blu-ray Disc media

10:21:46 #4 Text 0 File DlgWaitCD.cpp, Line 313
Last possible write address on media: 11826175
Last address to be written: 39583

10:21:46 #5 Text 0 File DlgWaitCD.cpp, Line 325
Write in overburning mode: NO (enabled: CD)

10:21:46 #6 Text 0 File DlgWaitCD.cpp, Line 2843
Recorder: HL-DT-ST BD-RE GGW-H20L, Media type: BD-RE

10:21:46 #7 Text 0 File DlgWaitCD.cpp, Line 500
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: BD-RE. Medium required by compilation: BD-R/RE; BD DL.)
This disc is not empty.
(Medium in drive: BD-RE. Medium required by compilation: BD-R/RE; BD DL.)
Accessing disc...
(Medium in drive: BD-RE. Medium required by compilation: BD-R/RE; BD DL.)

10:21:46 #8 Text 0 File ThreadedTransferInterface.cpp, Line 739
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 39264 (39264) = #39264/8:43.39
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 39264 blocks [E: HL-DT-ST BD-RE GGW-H20L]
1: TRM_DATA_MODE1 ()
2 indices, index0 (0) not provided
original disc pos #0 + 320 (320) = #320/0:4.20
relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 320 blocks [E: HL-DT-ST BD-RE GGW-H20L]
--------------------------------------------------------------

10:21:46 #9 Text 0 File ThreadedTransferInterface.cpp, Line 941
Prepare [E: HL-DT-ST BD-RE GGW-H20L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 2: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 80412672, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 80412672 80412672 81068032, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 39264 | 0 | 0x00
39264 | 2 | 0 | 0x41 | 0 | 0 | 0x00
39264 | 2 | 1 | 0x41 | 320 | 39264 | 0x00
39584 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

10:21:46 #10 Text 0 File SCSIPTICommands.cpp, Line 217
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

10:21:46 #11 Text 0 File Burncd.cpp, Line 4279
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

10:21:46 #12 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

10:21:46 #13 Text 0 File Burncd.cpp, Line 4401
Cache writing successful.

10:21:46 #14 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

10:21:46 #15 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 2x (8.990 KB/s)

10:21:46 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2695
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:21:46 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2695
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #11825856

10:21:46 #18 Text 0 File Cdrdrv.cpp, Line 10168
---- Disc Structure (BD): Disc Information on BD (00h) ----
Media Type: 1, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 4098
--- Header ---
Disc Information Identifier: <DI>
Disc Information Format: 01 h
Number of DI Units/Aux Frames in each DI block: 2
Number of (recording) layer to which this DI Unit applies: 0
DI unit Sequence Number in DI Block: 0
Continuation flag: Next DI Unit is the start of a new set of parameters (0)
Number of DI bytes in use in this DI unit: 99
--- Body ---
Disc Type Identifier: <BDW>
Disc Size/Class/Version: 2
DI Unit Format dependent contents:
BD Structure: 20 (14 h):
1 recording layer (SL), BD-RE
Hybrid Disc identifier/Channel bit length: 1 (1 h):
no DVD layer present, no CD layer present
channel bit length of 74,5 nm (25.0 GB max. per layer)
Push-Pull polarity flag bits: 00 h
BCA descriptor: BCA-code present (1)
Maximum transfer ra

10:21:46 #19 Text 0 File BD.cpp, Line 392
BD: Start write address at LBA 0, Recording mode: unknown Recording Mode (0),
spare area allocation: default (no action) (0), Stream recording: NO (0); return code 0

10:21:46 #20 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

10:21:46 #21 Text 0 File CUDFTransferItem2.cpp, Line 689

GenUDF2 FS Layout:
=-=-=-=-=-=-=-=-=-=-
Sectors to be written: 39584
Session Start: Sector 0
Volume Structure: Sector [0, 256] (257 Sectors)
Meta Data: Sector [257, 275] (19 Sectors)
Data: Sector [276, 39244] (38969 Sectors)
After Data: Sector [39245, 39263] (19 Sectors)
Trailer Track: Sector [11825856, 11826175] (320 Sectors)

GenUDF2 Parameters:
=-=-=-=-=-=-=-=-=-=-
PrepTime: 07-10-2009 10:21:44
UDF Revision: 1.02
UDF Partition Type: Physical
UDF Special Mode: None
Bytes per Sector: 2048
Session Start: 0
Physical Partition Start: -1
Total Capacity: 11826176
Multi Session Mode: None
Disc Type: BD-RE
OS Class: 0
Volume ID: Neu
Allow Unicode Labels: 0
Duplicate Meta Data: 1
MS Info File: 00000000
VMS Rollback File: 00000000
Create ISO bridge: 0
ECC Block Length: 32
Sparing Packet Length: 32
Allocation Unit Size: 32
Alignment Unit Size: 32
Make Writable: 0
Access Type: Read-only

10:22:31 #22 SPTI -1135 File SCSIPassThrough.cpp, Line 215
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1135)
CDB Data: 0x2A 00 00 00 06 40 00 00 20 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x02
Sense Area: 0x70 00 03 00 00 00 00 0A 36 20 03 B0 0C 02
Buffer x193d0cc0: Len x10000
0x0A F1 41 4B 7D FC 92 CA 33 8C C5 0E 86 C9 22 52
0x6A 87 03 8B 8A 9F 42 B1 18 24 FB 4A 01 D0 81 0C
0xC1 C0 E0 F8 CC 0C AA F3 EF C4 A5 C1 61 93 D2 58

10:22:31 #23 CDR -1135 File Writer.cpp, Line 306
Write error
E: HL-DT-ST BD-RE GGW-H20L

10:22:31 #24 SPTI -1135 File SCSIPassThrough.cpp, Line 215
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1135)
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x02
Sense Area: 0x71 00 03 00 00 00 00 0A 36 20 03 B0 0C 02

10:22:31 #25 CDR -1135 File WriterStatus.cpp, Line 292
Write error
E: HL-DT-ST BD-RE GGW-H20L

10:22:31 #26 TRANSFER -24 File WriterStatus.cpp, Line 292
Could not perform end of Disc-at-once

10:22:31 #27 Text 0 File DVDPlusDualLayer.cpp, Line 1452
SetDriveCaps: Set LAST LBA of layer 1 to 0

10:22:31 #28 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 2x (8.990 KB/s)

10:22:31 #29 Text 0 File SCSIPTICommands.cpp, Line 267
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

10:22:36 #30 Text 0 File Cdrdrv.cpp, Line 11478
DriveLocker: UnLockVolume completed

10:22:36 #31 Text 0 File SCSIPTICommands.cpp, Line 430
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon


Was auch extrem merkwürdig ist, dass Nero kurz nach Start des Brennvorgangs auf 51% springt und von da aus max. noch 1% zulegt, bevor der Fehler erscheint. In der Zeit kann er nie im Leben mit 2x 40mb gebrannt haben.


EDIT: Ich glaube mitlerweile, dass der RW-Rohling einfach einen weg hat. Kleinere Dateien können gebrannt werden, bei größeren (und somit ab einem bestimmten Punkt) bricht er mit folgendem Fehler ab:
http://img3.imagebanana.com/img/d1xhzy99/nero.gif

Errorlog schaut dementsprechend etwas anders aus:



Windows Vista 6.1
AMD64
Wow64Process
WinAspi: -

NT-SPTI used
Nero Version: 9.4.13.100
Internal Version: 9, 4, 13, 100

Recorder: <HL-DT-ST BD-RE GGW-H20L>Version: YL05 - HA 1 TA 3 - 9.4.13.100
Adapter driver: <Serial ATA> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data
CD-ROM: <FOV 5MJSLEVGH >Version: 1.03 - HA 1 TA 1 - 9.4.13.100
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : FOV 5MJSLEVGH 1.03 a1jtv1le Port 6 ID 0 DMA: Off

=== CDRom-Device-Map ===
FOV 5MJSLEVGH V: CdRom1
HL-DT-ST BD-RE GGW-H20L E: CdRom3
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 4095MB (4193332kB)
Free physical memory: 2768MB (2835420kB)
Memory in use : 32 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.7.2009
UDF Zusammenstellung
10:33:49 #1 Text 0 File SCSIPTICommands.cpp, Line 430
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

10:33:49 #2 Text 0 File Isodoc.cpp, Line 6998
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical

10:33:49 #3 Text 0 File Burncd.cpp, Line 3572
Turn on Disc-At-Once, using Blu-ray Disc media

10:33:56 #4 Text 0 File DlgWaitCD.cpp, Line 313
Last possible write address on media: 11826175
Last address to be written: 26815

10:33:56 #5 Text 0 File DlgWaitCD.cpp, Line 325
Write in overburning mode: NO (enabled: CD)

10:33:56 #6 Text 0 File DlgWaitCD.cpp, Line 2843
Recorder: HL-DT-ST BD-RE GGW-H20L, Media type: BD-RE

10:33:56 #7 Text 0 File DlgWaitCD.cpp, Line 500
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: BD-RE. Medium required by compilation: BD-R/RE; BD DL.)
This disc is not empty.
(Medium in drive: BD-RE. Medium required by compilation: BD-R/RE; BD DL.)
Accessing disc...
(Medium in drive: BD-RE. Medium required by compilation: BD-R/RE; BD DL.)

10:33:56 #8 Text 0 File ThreadedTransferInterface.cpp, Line 739
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 26496 (26496) = #26496/5:53.21
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 26496 blocks [E: HL-DT-ST BD-RE GGW-H20L]
1: TRM_DATA_MODE1 ()
2 indices, index0 (0) not provided
original disc pos #0 + 320 (320) = #320/0:4.20
relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 320 blocks [E: HL-DT-ST BD-RE GGW-H20L]
--------------------------------------------------------------

10:33:56 #9 Text 0 File ThreadedTransferInterface.cpp, Line 941
Prepare [E: HL-DT-ST BD-RE GGW-H20L] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 2: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 54263808, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 54263808 54263808 54919168, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 26496 | 0 | 0x00
26496 | 2 | 0 | 0x41 | 0 | 0 | 0x00
26496 | 2 | 1 | 0x41 | 320 | 26496 | 0x00
26816 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

10:33:56 #10 Text 0 File SCSIPTICommands.cpp, Line 217
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

10:33:56 #11 Text 0 File Burncd.cpp, Line 4279
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)

10:33:56 #12 Phase 24 File dlgbrnst.cpp, Line 1767
Caching of files started

10:33:56 #13 Text 0 File Burncd.cpp, Line 4401
Cache writing successful.

10:33:56 #14 Phase 25 File dlgbrnst.cpp, Line 1767
Caching of files completed

10:33:56 #15 Phase 36 File dlgbrnst.cpp, Line 1767
Burn process started at 2x (8.990 KB/s)

10:33:56 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2695
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:33:56 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2695
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #11825856

10:33:56 #18 Text 0 File Cdrdrv.cpp, Line 10168
---- Disc Structure (BD): Disc Information on BD (00h) ----
Media Type: 1, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 4098
--- Header ---
Disc Information Identifier: <DI>
Disc Information Format: 01 h
Number of DI Units/Aux Frames in each DI block: 2
Number of (recording) layer to which this DI Unit applies: 0
DI unit Sequence Number in DI Block: 0
Continuation flag: Next DI Unit is the start of a new set of parameters (0)
Number of DI bytes in use in this DI unit: 99
--- Body ---
Disc Type Identifier: <BDW>
Disc Size/Class/Version: 2
DI Unit Format dependent contents:
BD Structure: 20 (14 h):
1 recording layer (SL), BD-RE
Hybrid Disc identifier/Channel bit length: 1 (1 h):
no DVD layer present, no CD layer present
channel bit length of 74,5 nm (25.0 GB max. per layer)
Push-Pull polarity flag bits: 00 h
BCA descriptor: BCA-code present (1)
Maximum transfer ra

10:33:56 #19 Text 0 File BD.cpp, Line 392
BD: Start write address at LBA 0, Recording mode: unknown Recording Mode (0),
spare area allocation: default (no action) (0), Stream recording: NO (0); return code 0

10:33:56 #20 Text 0 File ThreadedTransfer.cpp, Line 273
Pipe memory size 83836800

10:33:56 #21 Text 0 File CUDFTransferItem2.cpp, Line 689

GenUDF2 FS Layout:
=-=-=-=-=-=-=-=-=-=-
Sectors to be written: 26816
Session Start: Sector 0
Volume Structure: Sector [0, 256] (257 Sectors)
Meta Data: Sector [257, 274] (18 Sectors)
Data: Sector [275, 26494] (26220 Sectors)
After Data: Sector [26495, 26495] (1 Sectors)
Trailer Track: Sector [11825856, 11826175] (320 Sectors)

GenUDF2 Parameters:
=-=-=-=-=-=-=-=-=-=-
PrepTime: 07-10-2009 10:33:54
UDF Revision: 1.02
UDF Partition Type: Physical
UDF Special Mode: None
Bytes per Sector: 2048
Session Start: 0
Physical Partition Start: -1
Total Capacity: 11826176
Multi Session Mode: None
Disc Type: BD-RE
OS Class: 0
Volume ID: Neu
Allow Unicode Labels: 0
Duplicate Meta Data: 1
MS Info File: 00000000
VMS Rollback File: 00000000
Create ISO bridge: 0
ECC Block Length: 32
Sparing Packet Length: 32
Allocation Unit Size: 32
Alignment Unit Size: 32
Make Writable: 0
Access Type: Read-only

10:39:43 #22 SPTI -1064 File SCSIPassThrough.cpp, Line 215
CdRom3: SCSIStatus(x02) WinError(0) NeroError(-1064)
CDB Data: 0x2A 00 00 00 62 60 00 00 20 00 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
Sense Area: 0x70 00 05 00 00 00 00 0A 2A 00 00 B0 21 02
Buffer x1c1ec500: Len x10000
0xA5 BC D7 18 AA FB 6B 18 BC 52 E5 00 83 20 59 48
0xE8 5C 92 8B C8 46 19 18 04 1B 00 84 FF 09 92 F8
0x63 CC 84 84 D8 26 3C 48 56 C4 48 88 68 4E CE 0D

10:39:43 #23 CDR -1064 File Writer.cpp, Line 306
Invalid block address
E: HL-DT-ST BD-RE GGW-H20L

10:39:43 #24 Text 0 File DVDPlusDualLayer.cpp, Line 1452
SetDriveCaps: Set LAST LBA of layer 1 to 0

10:39:43 #25 Phase 38 File dlgbrnst.cpp, Line 1767
Burn process failed at 2x (8.990 KB/s)

10:39:43 #26 Text 0 File SCSIPTICommands.cpp, Line 267
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

10:39:47 #27 Text 0 File Cdrdrv.cpp, Line 11478
DriveLocker: UnLockVolume completed

10:39:47 #28 Text 0 File SCSIPTICommands.cpp, Line 430
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon


Könnte ich mit meiner Vermutung richtig liegen?
KinGGoliAth
2009-07-10, 17:54:19
um das problem weiter einzugrenzen wirst du wohl um das testen anderer rohlinge nicht rumkommen.
und die sind teuer.
erst dann kann man beurteilen, ob man die falschen rolinge hat oder ob es an einem technischen problem des brenners liegt, welcher auch an mehreren pcs auftritt.

der beste grund noch die finger vom experimentellen bd brenner zu lassen. ;)