f!P[z]y
2009-10-08, 07:52:25
Version 1.8.1 ist zum Download verfügbar. Entweder nach Reg bei EVGA (klick (http://www.evga.com/PRecision/)) oder es ist irgendwo anders zu finden.
Änderungen von v1.8.0 zu v1.8.1
Changelog: EVGA Precision v1.8.1 (10-06-2009)
Added NVIDIA GeForce G210, GT220 and GT240 series graphics cards support.
EVGA On-Screen Display Server has been updated to version 3.5.0. Floating injection address hooking technology, which has been introduced in the previous version, is now disabled by default and can be enabled via the "Stealth mode" option in the server's properties.
Added hotkeys cross-links checking, Precision no longer allows defining the same hotkey for two different actions at the same time.
Added "Browse" button to "Screen capture" tab to allow users to change target folder for screenshots.
Added inegration with external overclocking stability testing applications.
#########################
Es gibt scheinbar schon seit langer Zeit (v1.6.0) ein Zusatz Feature welches ich schon ewig Suche: Automatisch Umschaltung zwischen 2D und 3D Takt.
EVGA Precision Hidden Features
For you advanced users, there is now a few hidden features in EVGA Precision, please note that it is only for advanced users who wish to use the below features.
Advanced profile management enabling separate 2D/3D profiles, depending on the graphics card activity. (Enabling a 3D app will trigger the 3D profile)
Under the <i> button now you will see "Active 3D Process" this shows the current 3D process for debugging. (statistics server must be running)
Pressing <Ctrl + A> will restart automatic profile management system. Please note that Precision must be running in order to use this function.
A couple of things that should be noted:
These management settings do not override the default hardware downclocking implementation. It affects 3D clocks only.
Profile loading is performed during hardware acceleration state change only (i.e. during 3D application start or termination).
Non-3D applications can sometimes invoke 3D hardware acceleration interfaces. If needed you can add an exception for these applications and prevent it from being detected.
How do you enable this feature?
Add the following line to the [Settings] section of EVGAPrecision.cfg located in the main installation directory of EVGA Precision.
UnlockAutomaticProfilesManagement = 1337
After that, save and exit and load EVGA Precision, you will find the profile management settings in the <Profiles> tab.
http://img211.imageshack.us/img211/4209/1337.png
Wie man eine Ausnahmen hinzufügt um bei einer bestimmten Anwendung 3D- oder 2D-Takt zu benutzen ist hier beschrieben: klick (http://www.evga.com/forums/fb.asp?m=100563190)
Änderungen von v1.8.0 zu v1.8.1
Changelog: EVGA Precision v1.8.1 (10-06-2009)
Added NVIDIA GeForce G210, GT220 and GT240 series graphics cards support.
EVGA On-Screen Display Server has been updated to version 3.5.0. Floating injection address hooking technology, which has been introduced in the previous version, is now disabled by default and can be enabled via the "Stealth mode" option in the server's properties.
Added hotkeys cross-links checking, Precision no longer allows defining the same hotkey for two different actions at the same time.
Added "Browse" button to "Screen capture" tab to allow users to change target folder for screenshots.
Added inegration with external overclocking stability testing applications.
#########################
Es gibt scheinbar schon seit langer Zeit (v1.6.0) ein Zusatz Feature welches ich schon ewig Suche: Automatisch Umschaltung zwischen 2D und 3D Takt.
EVGA Precision Hidden Features
For you advanced users, there is now a few hidden features in EVGA Precision, please note that it is only for advanced users who wish to use the below features.
Advanced profile management enabling separate 2D/3D profiles, depending on the graphics card activity. (Enabling a 3D app will trigger the 3D profile)
Under the <i> button now you will see "Active 3D Process" this shows the current 3D process for debugging. (statistics server must be running)
Pressing <Ctrl + A> will restart automatic profile management system. Please note that Precision must be running in order to use this function.
A couple of things that should be noted:
These management settings do not override the default hardware downclocking implementation. It affects 3D clocks only.
Profile loading is performed during hardware acceleration state change only (i.e. during 3D application start or termination).
Non-3D applications can sometimes invoke 3D hardware acceleration interfaces. If needed you can add an exception for these applications and prevent it from being detected.
How do you enable this feature?
Add the following line to the [Settings] section of EVGAPrecision.cfg located in the main installation directory of EVGA Precision.
UnlockAutomaticProfilesManagement = 1337
After that, save and exit and load EVGA Precision, you will find the profile management settings in the <Profiles> tab.
http://img211.imageshack.us/img211/4209/1337.png
Wie man eine Ausnahmen hinzufügt um bei einer bestimmten Anwendung 3D- oder 2D-Takt zu benutzen ist hier beschrieben: klick (http://www.evga.com/forums/fb.asp?m=100563190)