PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : FPD International 2011 - Display Messe


AnarchX
2011-10-26, 16:44:16
http://expo.nikkeibp.co.jp/fpd/2011/english/

http://pc.watch.impress.co.jp/docs/news/event/20111026_486481.html?ref=rss
http://ascii.jp/elem/000/000/645/645134/

13,3" Display mit 1W Verbrauch:
http://pc.watch.impress.co.jp/img/pcw/docs/486/481/544.jpg

27" 9W Monitor:
http://pc.watch.impress.co.jp/img/pcw/docs/486/481/541.jpg

E-Ink-Kompass für ein Snowboard:
http://pc.watch.impress.co.jp/img/pcw/docs/486/481/590.jpg

Spasstiger
2011-10-26, 17:47:06
13,3" Display mit 1W Verbrauch:
http://pc.watch.impress.co.jp/img/pcw/docs/486/481/544.jpg

27" 9W Monitor:
http://pc.watch.impress.co.jp/img/pcw/docs/486/481/541.jpg
Das geht aber mit Sicherheit auf Kosten der Blickwinkel oder gabs wieder einen größeren Entwicklungsschritt bei den LEDs?

AnarchX
2011-10-26, 18:38:51
Bei den Monitoren gibt man 160/170° an. Und bei einem 13,3" Display sind die Blickwinkel wohl nicht so entscheidend, wenn natürlich ein zusätzlicher High-Power-Mode mit weiteren Blickwinkeln wünschenswert wäre.

Spasstiger
2011-10-26, 19:12:13
Bei den Monitoren gibt man 160/170° an.
Die Blickwinkelangabe ist aber bezogen auf ein bestimmtes Kontrastverhältnis. Bei hochwertigen Bildschirmen werden die Blickwinkel auf ein Kontrastverhältnis von 10:1 bezogen, bei der TN-Riege wirbt man auch gerne mit 5:1-Bezug (ein TN-Panel erreicht bei Abweichung um 170°/2=85° von der optischen Achse noch ein Kontrastverhältnis von 5:1).
Über den Helligkeitsabfall bei Abweichung von der optischen Achse sagt die Blickwinkelangabe nix aus. Genauso wie die Blickwinkelangabe nix über Farbverschiebungen aussagt, die bei TN-Paneln mit das größte Problem sind.

Ich hab hier ein Paper zum Thema "prism backlight" gefunden:
A LED backlight system with a double-prism pattern for use in mobile phones to achieve thin and high luminance LED backlight systems is proposed. The double-prism pattern is formed on the light guide of the proposed LED backlight system and simultaneously exhibited two optical functions: shifting of the light from the direction of the guided light toward the radiated light and controlling the directivity of the radiated light. Therefore, using the double-prism pattern eliminates two prism sheets and a diffusive sheet, which are indispensable optical elements to exhibit the optical function that controls the directivity of light in conventional LED backlight systems. Consequently, the thickness of the proposed LED backlight system is reduced to 0.75 mm compared to that of the conventional system. A luminance of 3115 nits and a full-width half maximum of 35° for radiated light, which are comparable to conventional LED backlight systems, were obtained.
Quelle: http://scitation.aip.org/getabs/servlet/GetabsServlet?prog=normal&id=JSIDE8000014000011001045000001&idtype=cvips&gifs=yes&ref=no

Ist wohl genau das, woran ich gedacht habe, der Abstrahlwinkel wird eingeschränkt, wodurch das Bild bei von der optischen Achse abweichenden Blickwinkeln recht dunkel sein dürfte.