PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Laptop fährt nicht immer hoch


johla
2017-09-02, 06:23:17
Ich muss meinen Laptop Lenovo ideapad 500s seit gestern mehrfach an- und ausschalten, bis der Festplattenverschlüsselungsdialog (Festplattenverschlüsselung von Kubuntu 17.04) kommt. Sonst kommt nur ein schwarzer Bildschirm mit Hintergrundbeleuchtung.


Woran kann das liegen? Was kann ich dagegen machen?

patrese993
2017-09-02, 21:01:31
Sterbende Festplatte, schlechtes Datenkabel.. Kann man so nicht wirklich sagen...

Lowkey
2017-09-02, 21:02:05
Crystaldiskinfo sagt dir direkt, ob was nicht paßt.

johla
2017-09-03, 08:17:41
Crystaldiskinfo sagt dir direkt, ob was nicht paßt.Gibt es etwas Analoges auch für Linux? Ich habe kein Windows drauf.

Rooter
2017-09-03, 11:36:36
Gibt es etwas Analoges auch für Linux? Ich habe kein Windows drauf.Welches Linux?
Bei Gnome gibt es das Programm "Disks", das auch SMART anzeigen kann.

MfG
Rooter

johla
2017-09-03, 12:34:39
Welches Linux?
Kubuntu.

lumines
2017-09-03, 12:37:24
Probier einmal smartctl (https://wiki.ubuntuusers.de/Festplattenstatus/). Benutze ich immer am Mac und unter GNU/Linux, scheint auch so das Standardprogramm zu sein.

johla
2017-09-03, 12:48:31
Die Ausgabe ist: smartctl -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.10.0-33-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model: RTNMB256VBM8EWXL
Serial Number: SD0G84635R1SZ5CG009F
Firmware Version: T1054
User Capacity: 256.060.514.304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Sep 3 12:46:27 2017 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 11) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1) seconds.
Offline data collection
capabilities: (0x19) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 14) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 32768
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 528
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 391
170 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 1
173 Unknown_Attribute 0x0033 099 099 010 Pre-fail Always - 111671181312
174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 68
178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 000 Old_age Always - 430
180 Unused_Rsvd_Blk_Cnt_Tot 0x0032 100 100 --- Old_age Always - 1075
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 2
184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0
187 Reported_Uncorrect 0x003a 100 100 000 Old_age Always - 0
189 Unknown_SSD_Attribute 0x002a 100 100 000 Old_age Always - 281
194 Temperature_Celsius 0x0032 100 060 000 Old_age Always - 40
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0032 100 100 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x0012 100 100 000 Old_age Always - 0
202 Unknown_SSD_Attribute 0x0033 099 099 010 Pre-fail Always - 0
233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 6781
235 Unknown_Attribute 0x0033 071 071 040 Pre-fail Always - 0
241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 6755
242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 380

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported

Scheint alles in Ordnung zu sein?

Rooter
2017-09-03, 13:01:09
5 Reallocated_Sector_Ct = 32768
196 Reallocated_Event_Count = 1

Irgendwas wurde da schon aussortiert... :uponder:

MfG
Rooter

johla
2017-09-03, 13:07:13
Heißt das, dass Fehler auf der SSD sind? Muss ich etwas tun?

johla
2017-09-04, 06:18:09
Ich habe jetzt eingestellt, dass er bei Starten GRUB 2 anzeigt. Der Fehler ist immer noch (manchmal) da, er lädt noch nicht einmal GRUB.

BIOS/UEFI wird nicht angezeigt.