PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Speichertakt bei P4


Frochy
2003-07-07, 13:49:45
Hallo,
ich weiss, dass dieses Thema eigentlich schon durch ist. Leider habe ich mit der Suchen Funktion nicht das Richtige gefunden. Vielleicht kann mir da trotzdem noch mal jemand helfen.
Kurz zur Ausstattung: Asus P4B533, 2,4 P4, 2 x 512 Corsair PC400.
PC läuft derzeit auf Standart Werte.
Nun wollte ich endlich mal meine Speicher etwas ausreizen, weiss aber nicht mehr, wie ich den Speicherteiler auf 5:4 bekomme.
Soweit ich weiss muss man die Speichertimings auf "langsam" stellen, dann einen Schalter auf dem Board "umlegen" und dann ist im Bios die 1:1 Einstellung in Wirklichkeit 5:4 und die 4:5 Einstellung die 1:1.
Ist das soweit richtig ?
Nun die Frage, welchen Schalter muss ich denn umschalten ? Muss ich damit auch den Schalter-Free Mode deaktivieren ?

Gruss und Danke Frochy

Zool
2003-07-07, 15:24:51
Also der Jumper-Free-Modus sollte immer aktiviert bleiben.

Aber den Rest Deiner Fragen verstehe ich nicht. Das P4B533 (845E Chipsatz) unterstützt nur offiziel 266 (2x133) DDR RAM. Da gibt es nur die Teiler 1:2. Eventuell gibts auch den Teiler 1:2.5 für 2x166(DDR333) bei FSB533. DDR400 kannst Du nur durch Übertaktung bekommen.
Bei Deinem Speicher sollte es keine Probleme mit schnellen Timings geben, da der ja nur bei 166Mhz (DDR333) laufen kann.

Die 4:3,5:4; 1:1; 4:5 Teiler gibts nur meines Wissens nur bei den 865/876 Boards.

Kappa
2003-07-07, 19:33:32
"ASUS P4B533 - Workaround to set 3:4 CPU/Memory Ratio Above 133 MHz"

..."Power down (obviously) and set the DIP switches to 100 MHz and whatever multiplier corresponds to your processor. Do NOT change the jumper to jumpered mode - leave it on jumperfree.

Power up and select 70/35 for the AGP/PCI frequency, and 1:1 for the CPU:Memory ratio. Select any FSB above 132 MHz and an appropriate memory timing, and the actual ratio will be 3:4 at the timing you selected.
Setting the memory to 4:3 will cause the memory to run at 1:1; setting it to 1:1 will make it run at 3:4. Strange, but it works. Attached are a couple of Sandra screenshots"...
Quelle

http://www.overclockers.com/tips1013/

Frochy
2003-07-08, 10:53:01
Aaah,
prima Sache. Danke, dass werde ich heute mal versuchen.

Gruss Frochy