nemesiz
2003-08-24, 11:26:43
Man beachte bitte den ersten Punkt bei den FIXES!!!!
Ach noch was.. mag sein dass es nen Checksume Error gibt.. einfach Defaults laden und neu einstellen..dann isses vorbei
P12
New Fixes/Features:
· Added support to boot using future processors.
· Fixed issue where if IFLASH was performed right after VPD area
update will cause system to hangs at POST code 55h.
· Fix issue where system will POST hang at 00h after setting
manufacturing jumper due to VID been cleared to 00h.
P11
New Fixes/Features:
· Added initial Desktop Control Center support.
· Added Flash5 Phase 2 support.
· Moved BBS area from VPD block to backup block.
· Fixed issue where the PCI slot information silk screen on the board
does not match with what is loaded into SMBIOS table.
· Added a work-around for IRQ sharing issue with a hard drive imaging
application when in SATA native mode.
· Compressed the hex i mage to free-up boot block space. Moved Setup
Client module to boot block to free-up space for main BIOS.
· Added functionality to flash update the BIOS in runtime using SMI
without having to do a reboot to unlock the blocks. Both the methods
are now supported and can be invoked from iFlash.
· Fixed two potential issues in boot block code.
P10
New Fixes/Features:
· Fixed a system hang issue during POST with a Flash USB Flash card
reader/writer.
· Added support to switch the display mode from the Logo to the BIOS
text if an Option ROM for a PCI Mass Storage device is being
executed.
Ach noch was.. mag sein dass es nen Checksume Error gibt.. einfach Defaults laden und neu einstellen..dann isses vorbei
P12
New Fixes/Features:
· Added support to boot using future processors.
· Fixed issue where if IFLASH was performed right after VPD area
update will cause system to hangs at POST code 55h.
· Fix issue where system will POST hang at 00h after setting
manufacturing jumper due to VID been cleared to 00h.
P11
New Fixes/Features:
· Added initial Desktop Control Center support.
· Added Flash5 Phase 2 support.
· Moved BBS area from VPD block to backup block.
· Fixed issue where the PCI slot information silk screen on the board
does not match with what is loaded into SMBIOS table.
· Added a work-around for IRQ sharing issue with a hard drive imaging
application when in SATA native mode.
· Compressed the hex i mage to free-up boot block space. Moved Setup
Client module to boot block to free-up space for main BIOS.
· Added functionality to flash update the BIOS in runtime using SMI
without having to do a reboot to unlock the blocks. Both the methods
are now supported and can be invoked from iFlash.
· Fixed two potential issues in boot block code.
P10
New Fixes/Features:
· Fixed a system hang issue during POST with a Flash USB Flash card
reader/writer.
· Added support to switch the display mode from the Logo to the BIOS
text if an Option ROM for a PCI Mass Storage device is being
executed.