PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : xp 1800 übertakten mein board is ein GA-7ZXE


sascha22
2003-09-25, 04:28:42
hallo leute bin neu hier und schon ne erste wichtige frage ich möchte gerne mein xp1800 übertakten weis aber nicht wie das geht ich habe ein gigabyte GA-7ZXE board hier die infos von mein board
----------------------------------------------------------
xp 1800
geforce 4 ti 4200
512 SDRAM
XP proff
----------------------------------------------------------
BOARD
----------------------------------------------------------
Socket A for AMD Athlon™ /Duron™ 266/200MHz FSB processors

Supports 600MHz ~ 1.5GHz and faster

AUTO detect CPU voltage


Chipset


VIA VT8363A (KT133A) North bridge

VIA VT82C686B PCI Super-I/O Integrated Peripheral Controller (PSIPC)

AC97 codec


Memory


3 168-pin DIMM sockets

Supports PC-100 / PC-133 SDRAM and VCM SDRAM

Supports up to 1.5GB DRAM

Supports only 3.3V SDRAM DIMM


Expansion Slots


1 x AGP slot supports 4X mode & AGP 2.0 compliant

5 x PCI slots support 33MHz & PCI 2.2 compliant


I/O


2 x UDMA 33/66/100 bus master IDE ports on board

1 x FDD, 2 x COM, 1 x LPT, PS/2 keyboard, PS/2 Mouse on board

1 x Joystick, 1 x Line-in, 1 x Line-out, 1 x MIC on board (optional)

2 x USB ports on board

2 x USB ports by cable (optional accessary)

IrDA TX / RX header ready


Power


ATX power connector

Power-on by LAN, RTC, Modem & switch

Power-off by Windows® 95/98/2000 shut down & switch


Form Factor


ATX , 4 layer PCB (30.4*18.3cm)


H/W Monitoring


System voltage detect (Vcore,VDD ,Vcc,+12V)

H/W detect & report Power-in voltage, CPU voltage and CMOS battery status

CPU/System fan revoltion & temperature detect


BIOS


AMI BIOS with enhanced ACPI feature for PC98/Win98/WinMe/Win2000 compliance, Green, PnP, DMI, INT13 (>8.4GB) & Anti-Virus functions

IDE#1~#4, SCSI, LS120, ZIP & CD-ROM bootable

Auto-detect & report system health status

Supports @BIOS™ Live Update


Other Features


Includes 3 fan power connectors

PC99 connectors

Mosfets cooled by CPU fan

Supports EasyTune III™


Driver


Gigabyte Windows Utility Manager

VIA 4 in 1 service pack utility

nun meine frage wie hoch kann ich den takten und wie mach ich das im bios bei dem board wäre dankbar für ne anleitung wenns geht mit bilder damit ich genau nach gucken kann wie ich was machen muss ich habe auch keine wasser kühlung oder so da ich inmo wenig geld habe
also wie hoch könnte ich den takten das der auch mit normalen lüfter läuft und nciht durch brennt *zzzz :) ich danke euch schon ma im voraus :)