AGP Always Compensate an oder aus?

[Gast]

Ich hab in meinem Mobo-Bios ne Option "AGP always compensate". Hab schonmal danach gegoogelt, aber irgendwie bin ich daraus nicht schlau geworden. Sollte man diese Option bei Problemen (gelegentliche Abstürze mit ner Club3d 9700) eher an oder aus lassen? Ansonsten hab ich schon alles probiert AGP 4x/2x, Fast write aus, Treiber gewechselt... Vielen DAnk im vorraus.

[HellHorse]

Bei solchen Fragen hilft meist Rojak Pot (http://www.rojakpot.com/showFreeBOG.aspx?Lang=0&bogno=31)

This BIOS feature determines if the AGP controller should be allowed to dynamically adjust the AGP driving strength or use preset drive strength values.

By default, it is set to automatically adjust the AGP drive strength once or at regular intervals. The circuitry can also be disabled or bypassed and a user setting used. However, this BIOS feature does not allow manual configuration.

When you enable AGP Always Compensate, the auto-compensation circuitry will automatically adjust the AGP drive strength at regular intervals. If you disable it, the circuitry will only adjust the drive strength once at boot-up. The drive strength values derived at boot-up will remain until the system is rebooted.

It is recommended that you enable AGP Always Compensate so that the AGP controller can dynamically adjust the AGP driving strength at regular intervals.

In dem Fall eher anlassen.