PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : Waermeleitpaste entfernen


Sinister
2002-12-06, 14:27:39
Hi!

Ja wie entferne ich am besten alte waermeleitpaste vom Die?
Nagellackentferner? Loesungsmittel, Benzin? Ich hab da nicht so richtig einen plan von. Hab die nur einmal aufgetragen und nie versucht die wieder abzumachen, aber bei nem neuen Kuehler jetzt wird das notwenig. Thx

Sinister

joergd
2002-12-06, 14:52:39
http://www.arcticsilver.com/arctic_silver_instructions.htm

da haste ne anleitung vom hersteller für AS, die anderen analog:

CPU Ceramic:
Use any of the following cleaners.
Any dish detergent (Dawn, Lux, Palmolive, Etc.)
Do not use soap for an automatic dishwasher to clean a CPU.
WD-40, citrus based grease removers (Goo Gone, Etc.)
Xylene based products (Goof Off, some carburetor cleaners and many brake cleaners)
Mineral spirits. (Be careful to keep the mineral spirits away from the core.)
Once the majority of the compound has been removed from the ceramic, small patches remaining on the ceramic can be 'erased' with a soft eraser.
2. If you use any of the suggested products to remove Arctic Silver thermal compound from the CPU ceramic or heatsink base, always do a final cleaning with isopropyl alcohol to remove any residue from the cleaner.
also auf deutsch: Geschirrspülmittel (kein Spülmaschinenreiniger), reine Alkohole (Spiritus, iso-Propanol), Azeton, Feuerzeug-/Reinigungsbenzin),

2. anschließend Feinreinigung mit iso-Propanol

keine!!! ölhaltigen Mittel, wie Verdünnung usw. verwenden

BlackArchon
2002-12-06, 14:55:30
Einfach einen trockenen Lappen nehmen.